Cat 797F specs
- payload (nominal)
- 363 t
- net power
- 2,828 kW (3,793 hp)
- machine operating weight
- 623,690 kg
Cat 797F dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| 4 | Overall length | 15.08 m49 ft 6 in |
| 15 | Overall width | 9.116 m29 ft 11 in |
| 17 | Overall height (canopy) | 7.709 m25 ft 4 in |
| 5 | Wheelbase | 7.195 m23 ft 7 in |
| 9 | Loading height (empty) | 6.998 m23 ft 0 in |
| 11 | Dump height (body raised) | 15.701 m51 ft 6 in |
| 7 | Ground clearance | 0.786 m2 ft 7 in |
| 1 | Height to top of ROPS | 6.526 m21 ft 5 in |
| 2 | Overall body length | 14.802 m48 ft 7 in |
| 3 | Inside body length | 9.976 m32 ft 9 in |
| 6 | Rear axle to tail | 3.944 m12 ft 11 in |
| 8 | Dump clearance | 2.017 m6 ft 7 in |
| 10 | Inside body depth (maximum) | 3.363 m11 ft 0 in |
| 12 | Centre line front tyre width | 6.534 m21 ft 5 in |
| 13 | Engine guard clearance | 1.025 m3 ft 4 in |
| 14 | Outside body width | 9.755 m32 ft 0 in |
| 16 | Inside body width | 8.513 m27 ft 11 in |
| 18 | Rear axle clearance | 0.947 m3 ft 1 in |
| 19 | Centre line rear dual tyre width | 6.233 m20 ft 5 in |
| 20 | Overall tyre width | 9.529 m31 ft 3 in |
Cat 797F specifications
Cat 797F (C175-20) with the standard 290-6420 body and 59/80R63 tyres, per tech spec AEHQ5884-09 (12-2023); Al-Bahar lists the 797F in the UAE.
22 figures in 6 groups
Weight
- Payload (nominal)
- 363 tNominal payload capacity
- Gross machine operating weight
- 623,690 kgTarget gross machine operating weight
- Chassis weight
- 210 630 - 219 146 kg
- Body weight
- 41 368 - 61 235 kgDepends on body and liner
- Weight distribution, empty (front/rear)
- 47.2% / 52.8%
- Weight distribution, loaded (front/rear)
- 33.3% / 66.7%
Body
- Body capacity (SAE 2:1 heaped)
- 240-267 m³MSD II body, 100% fill factor
- Body capacity (struck)
- 188-213 m³MSD II body
- Hoist pump flow
- 1,200 L/minHigh idle
- Body raise time
- 25 sHigh idle; lower (float) 19 s
Engine
- Engine model
- Cat C175-20
- Emissions
- Compliant with current U.S. EPA standards where applicable
- Gross power
- 2,983 kW (4,000 hp)SAE J1995, at 1,750 rpm
- Net power
- 2,828 kW (3,793 hp)SAE J1349, at 1,750 rpm
- Displacement
- 106 L
- Bore x stroke
- 175 mm x 220 mm
Performance
- Top speed
- 67.6 km/hLoaded, 7th gear
- Turning diameter
- 42 mMachine clearance turning diameter
- Steering angle
- 40°
Transmission
- Transmission
- 7F/1R
- Total reduction ratio
- 21.26:1Differential 1.276:1, planetary 16.67:1
Tyres
- Tyres
- 59/80R63 (Michelin or Bridgestone)
Source: Cat 797F Mining Truck specifications AEHQ5884-09 (12-2023), Zeppelin (Cat dealer) copy
Cat 797F service
What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 319 L
Fluid: Cat DEO-ULS SAE 15W-40 (rated -10 to 50 °C) (Caterpillar Machine Fluids Recommendations SEBU6250-30 (Dec 2020))
The engine runs near full load for most of every cycle; in Gulf heat the oil works harder, so take an S·O·S sample at every change and keep to the hours.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 3,785 L1,000 gal
- Cooling system
- 1,160 L306 gal
- Engine oil, with filter
- 319 L84 gal
- Differentials
- 1,176 L311 gal
- Final drives (each)
- 185 L49 gal
- Steering system, with tank
- 355 L94 gal
- Brake/hoist system, with tank
- 1,600 L441 gal
- Torque converter/transmission system
- 629 L166 gal
Service intervals
- Coolant
- 12,000 hours
Compare the Cat 797F
The machines nearest in size, each drawn beside this one at the same scale.
Cat 797F prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 11
AED 750 /day
No priced Cat 797F for hire yet: this is all rigid dump trucks
No Cat 797F for rent listed right now.
Request a Cat 797FAbout the Cat 797F
The Cat 797F is a rigid dump truck with a Cat C175-20 engine rated at 2,828 kW (3,793 hp).
For transport it measures 15.08 m long and 9.116 m wide, and its tank holds 3,785 L of fuel.
A rigid dump truck: a mining and quarry hauler with a fixed frame and a huge body, for moving rock and ore on haul roads.
Typical jobs: mining haulage, quarry production, large earthmoving projects, overburden removal.
Cat 797F questions
What engine and horsepower does the Cat 797F have?
A Cat C175-20 engine rated at 2,828 kW (3,793 hp) net.
How much can a Cat 797F carry?
Its rated payload is 363 t (400 tons).
What is the Cat 797F's fuel tank capacity?
3,785 L (1,000 gal).
How much oil does a Cat 797F take?
Engine oil: 319 L (84 gal).
What are the Cat 797F's main competitors?
The machines nearest it in size are the Cat 777, the Cat 785, the Cat 793. Each has a side-by-side comparison on EquipmentsFinder.
Is the Cat 797F sold in the UAE?
Yes. The Cat 797F is sold in the UAE and the Gulf, the USA, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.
What is a Cat 797F used for?
A rigid dump truck: a mining and quarry hauler with a fixed frame and a huge body, for moving rock and ore on haul roads. Typical jobs: mining haulage, quarry production, large earthmoving projects, overburden removal.
Need a Cat 797F on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
