Case 570N EP specs
Case 570N EP dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| E | Overall length with 3-point hitch | 5.15 m16 ft 11 in |
| N | Wheelbase | 2.13 m7 ft 0 in |
| O | Reach from front axle centreline, bucket on ground | 1.89 m6 ft 3 in |
| A | Height to top of canopy | 2.74 m9 ft 0 in |
Case 570N EP specifications
Case 570N EP loader / tool carrier (Tier 4 Final, FPT F5HFL463D) from Case's North American spec sheet: a tractor loader with a rear 3-point hitch - Case lists no backhoe for the 570N EP and publishes no Gulf sheet; figures for 4WD, 19.5 L x 24.0 rear tyres and the 82 in GP long lip bucket.
36 figures in 8 groups
Dimensions
- Height to top of cab
- 2.74 m19.5 L x 24.0 rear tyres
- Width over tyres
- 2.07 m
- Ground clearance
- 0.28 mAt front axle
- Turning radius, 4WD engaged, brakes off
- 4.18 mCurb to curb, no bucket; brakes on 3.52 m
Loader performance
- Hinge pin height (max lift)
- 3.41 mBucket hinge pin fully raised
- Bucket hinge pin height at SAE carry
- 0.33 m
- Overall operating height, fully raised
- 4.17 m
- Dump angle at full height
- 46°
- Dump clearance at max lift
- 2.63 mAt full height, 45° dump, long lip bucket
- Dump reach at max lift
- 0.66 mAt full height, 45° dump, long lip bucket
- Bucket rollback at ground line
- 40°
- Bucket rollback at SAE carry
- 45°
- Bucket rollback at full height
- Adjustable
- Digging depth below grade
- 0.19 mBucket flat, long lip bucket
- Lift capacity to full height
- 2,950 kg
- Breakout force, lift cylinders
- 41 kN
- Shovel breakout force
- 43 kN
Three-point hitch
- Hitch
- Category I & II 3-point hitch; hydraulic lift, pitch, tilt and 2 auxiliary remotes
- Vertical lift force, lowest point
- 11 kN
Weight
- Operating weight
- 5,051 kg
- Operating weight (heaviest configuration)
- 6,581 kg
Engine
- Engine model
- FPT F5HFL463D
- Emissions
- Tier 4 Final
- Cylinders
- 4
- Displacement
- 3.4 L
- Bore
- 99 mm
- Stroke
- 110 mm
- Gross power
- 55 kW (74 hp)At 2,200 rpm
- Net power
- 54 kW (72 hp)At 2,200 rpm, with viscous fan
- Max torque
- 316 NmGross at 1,400 rpm (net 310 N·m)
Transmission
- Transmission
- 4F/4R power shuttle synchromesh
- Top speed
- 38.6 km/h4th gear, 19.5 L x 24.0 rear tyres
Hydraulics
- Pump flow
- 108 L/minGear pump, at 207 bar
- Max pressure
- 207 bar
Tyres
- Front tyres
- 12.0 L x 16.5, 8-ply (4WD)2WD: 11.0 L x 16.0
- Rear tyres
- 19.5 L x 24.0, 10-plyOptional 17.5 L x 24.0
Source: Case 570N EP Loader/Tool Carrier spec sheet, Tier 4 Final (North America)
Case 570N EP service
What each system holds and when Case says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 8 L
The 3.4-litre FPT engine works hard pushing the loader and hitch tools; oil past its hours lets the turbo and bearings wear.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 114 L30 gal
- Hydraulic system, with tank
- 68 L72 qt
- Hydraulic tank
- 55 L58 qt
- Engine oil, with filter
- 8 L8.5 qt
- Cooling system
- 17.3 L18.3 qt
- Transmission (4WD)
- 20 L21 qt
Moving a Case 570N EP
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 5.15m
- Width
- 2.07m
- Height
- 2.74m
- Weight
- 5.1t
- RoadA beavertail or flatbed truck
- SeaA 20 ft flat rack, out of gauge (over-height): expect a surcharge
Case 570N EP prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 18
AED 1,150 /day
No priced Case 570N EP for hire yet: this is all tractor loaders
No Case 570N EP for rent listed right now.
Request a Case 570N EPAbout the Case 570N EP
The Case 570N EP is a 5.05-tonne tractor loader with a FPT F5HFL463D engine rated at 54 kW (72 hp).
Its fuel tank holds 114 L.
A tractor loader: a loader bucket at the front of a rigid, wheeled tractor, with a three-point hitch at the back for box blades, rakes and other tools.
Typical jobs: grading and finishing ground, loading trucks and moving material, site clean-up and landscaping, working tow-behind and hitch tools.
Case 570N EP questions
How much does a Case 570N EP weigh?
5,051 kg (11,134 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Case 570N EP have?
A FPT F5HFL463D engine rated at 54 kW (72 hp) net.
What are the Case 570N EP's dimensions?
5.15 m long, 2.07 m wide and 2.74 m high, from Case's dimension drawing.
How do you transport a Case 570N EP?
Road: a beavertail or flatbed truck. Sea: a 20 ft flat rack, out of gauge (over-height): expect a surcharge.
What is the Case 570N EP's fuel tank capacity?
114 L (30 gal).
How much oil does a Case 570N EP take?
Engine oil: 8 L (8.5 qt). Hydraulic oil: 68 L (72 qt).
Is the Case 570N EP sold in the UAE?
Not new through a Gulf dealer: it is sold in the USA. Used and imported machines do come up on EquipmentsFinder.
What is a Case 570N EP used for?
A tractor loader: a loader bucket at the front of a rigid, wheeled tractor, with a three-point hitch at the back for box blades, rakes and other tools. Typical jobs: grading and finishing ground, loading trucks and moving material, site clean-up and landscaping, working tow-behind and hitch tools.
Need a Case 570N EP on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
