EquipmentsFinder
Need equipment? Have equipment?
Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.
Need equipment? Have equipment?
Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.
No milling machines are listed for sale in the UAE today. Cold planers come onto the used market in small numbers, usually when a road contractor renews its fleet. A request posted on EquipmentsFinder reaches verified suppliers across the country, some of whom hold milling machines they have not advertised.
Until a listing appears, the Dubai, Sharjah and Abu Dhabi pages show this category per emirate, the buy hub lists every category with stock, and milling machines for hire covers short-term needs.
Sellers post their own machines with photos, year, drum width, hours and a contact number; buyers call or message the seller directly, and EquipmentsFinder takes no commission. With no stock in the category, the inquiry form is the quickest route: state the milling width, depth and budget, and sellers who can supply reply with a quote.
A cold planer cuts a set depth of asphalt or concrete with a drum of carbide picks and conveys the millings into a truck. Machines are classed by drum width.
Drums of 350 mm to 1,000 mm on wheeled chassis, used for utility cuts, trench reinstatement, kerb-line milling and car-park repairs in streets where a large planer cannot manoeuvre.
Tracked or wheeled machines with 1.0 to 1.5 metre drums, suited to single-lane resurfacing on municipal roads, junction repairs and milling around ironwork. This is the size UAE contractors most often sell when a maintenance contract ends.
Tracked half-lane and full-lane planers of 2.0 to 2.2 metres and 500 horsepower or more, built for highway and runway rehabilitation where production per shift is what counts. Ask for the maintenance log, as they are usually sold straight off a project.
Match the drum to the cut the work needs most often: a 2 metre machine run on a 1 metre strip wastes fuel and picks. Levelling courses of 30 to 50 mm are routine for mid-size machines, while full-depth removal of 100 mm or more belongs to the large-format class. Check drum and pick-holder wear, the conveyor belt and the levelling sensors.
With nothing listed, no price figures can be given. When a milling machine is offered, the price is set by the seller and shown on the listing where published; drum width, hours, pick-holder condition and the age of the levelling system drive it. Ask whether the quote includes VAT, loading and delivery, and whether spare picks or conveyor belts come with the machine.
Road-maintenance contractors in Dubai, Abu Dhabi and Sharjah hold most of the country's milling fleet, so listings appear there first when a fleet is refreshed; the per-emirate pages above update as machines are posted. Buyers in Ajman, Fujairah, Umm Al Quwain and Ras Al Khaimah should post a request, since sellers in the larger emirates deliver across the country.
With no cold planers advertised today, the fastest way to buy one is to post a request stating drum width, cutting depth, preferred brands and delivery emirate. Suppliers reply directly, and the buyer pays nothing.
No milling machines are listed for sale today, so there is no current price data to quote. When one is advertised, the asking price is set by the seller and depends on drum width, hours and the condition of the drum, picks and conveyor. Request a quote through the inquiry form and ask the seller to confirm what the price includes.
Choose by the cut width the work needs most often. Utility and patch repairs call for a compact planer of 350 mm to 1,000 mm, municipal lane resurfacing for a 1.0 to 1.5 metre machine, and highway or runway rehabilitation for a 2 metre tracked planer. Running an oversize machine on narrow work wastes fuel and picks.
A new planer comes with warranty, current levelling technology and a dealer parts channel, but at a price only a steady resurfacing workload justifies. A used machine from a UAE contractor is cheaper and available now, provided the drum, pick holders and conveyor are inspected and the hours and service history are shown in writing.
Yes, and it should be done running. Ask the seller to start the engine, rotate the drum, run the conveyor and cycle the levelling system. Count missing or worn pick holders, check the drum housing for cracks, and look at the track pads or tyres. Each listing shows the seller's phone and WhatsApp number for arranging the visit.
A milling machine is construction plant rather than a registered road vehicle, so ownership normally passes by a signed sale agreement or invoice quoting the serial number, together with the seller's trade licence copy and proof of payment. Ask for the original import documents and the maintenance records if the seller holds them, and agree in writing what is included.
The request is shown to suppliers across the UAE who sell in this category, including those who have not listed a machine. Those who can supply reply directly with a price, the machine's specification and its location. There is no charge for posting, and the buyer chooses which replies to follow up.