Volvo L90H specs
- bucket capacity
- 2.8 m³
- net power
- 134 kW (180 hp)
- operating weight
- 15,120 kg
- static tipping load (full turn)
- 10,070 kg
Volvo L90H dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| A | Overall length (bucket on ground) | 7.59 m24.9 ft |
| B | Bucket hinge pin to rear end | 6.17 m20.2 ft |
| C | Wheelbase | 3.05 m10 ft |
| I | Rear axle to rear bumper | 1.88 m6.2 ft |
| D | Ground clearance | 0.45 m1.5 ft |
| F | Height to top of cab | 3.28 m10.8 ft |
| G | Dump height at reach N (position G) | 2.132 m7 ft |
| H | Dump clearance at max lift | 2.9 m9.5 ft |
| J | Bucket bottom height at max lift | 3.73 m12.2 ft |
| K | Hinge pin height (max lift) | 4.04 m13.3 ft |
| L | Overall operating height | 5.38 m17.7 ft |
| M | Reach at max lift | 0.99 m3.2 ft |
| N | Reach at 45° discharge, position G | 1.66 m5.4 ft |
| E | Digging depth, max dump (S) | 1.18 m3.9 ft |
| T | Digging depth | 0.112 m0.4 ft |
| V | Bucket width | 2.75 m9 ft |
| X | Tread width | 1.96 m6.4 ft |
| Y | Width over tyres | 2.49 m8.2 ft |
| a1 | Clearance circle (diameter) | 12.24 m40.2 ft |
| a2 | Turning radius (outside of tyres) | 5.43 m17.8 ft |
| a3 | Inner turning radius | 2.94 m9.6 ft |
Volvo L90H specifications
Volvo L90H Tier 3 / Stage IIIA build (D6E engine) from the product guide on Volvo CE Middle East's L90H page, standard boom, 2.8 m³ general-purpose bucket on 20.5 R25 tyres.
25 figures in 7 groups
Angles
- Rollback angle at max lift
- 57°
- Dump angle at max lift
- 45°
- Rollback angle at ground
- 44°
- Rollback angle at carry
- 49°
- Max dump angle at ground
- 67°
- Articulation angle
- 40°±40°
Weight
- Operating weight
- 15,120 kg
Engine
- Engine model
- Volvo D6E6-cylinder in-line turbo diesel, common rail
- Emissions
- Tier 3 / Stage IIIA
- Gross power
- 134 kW (180 hp)ISO 14396, at 1,600-1,900 rpm
- Net power
- 134 kW (180 hp)ISO 9249 / SAE J1349, at 1,600-1,900 rpm
- Max torque
- 800 NmAt 1,600 rpm (gross and net)
- Displacement
- 5.7 L
Performance
- Bucket capacity
- 2.8 m³
- Static tipping load (full turn)
- 10,070 kg
- Static tipping load (straight)
- 11,780 kg
- Breakout force
- 138 kN
- Top speed
- 50 km/h
- Total cycle time
- 12 sLift 5.7 s, tilt 2.3 s, lower empty 4 s
Hydraulics
- Max pressure
- 310 bar
- Pump flow
- 171 L/minPump 2, at 10 MPa and 1,900 rpm
Transmission
- Transmission
- Volvo HTE 125C countershaft powershift (HTL 125 with lock-up), APS automatic 1-4
- Axles
- Volvo AWB 25 front / AWB 20 rear; 100% front differential lock
- Rear axle oscillation
- 13°
Tyres
- Tyres
- 20.5 R25 L3
Source: Volvo L90H product guide (Tier 2/Tier 3 markets) Ref. 20061992_C, 2026.01
Volvo L90H service
What each system holds and when Volvo says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 20 L
Fluid: Volvo Engine Oil VDS-4.5 15W-40 (Volvo CE: 1000-hour engine oil intervals)
Volvo allows 1000-hour oil changes on wheel loaders only with VDS-4.5 oil and Volvo filters, on qualifying machines; otherwise follow the interval in your operator's manual.
Oil carries heat and grit out of the engine; a loader idling and digging in Gulf heat and dust wears its oil faster than the hour meter suggests, so change it on time and sample it.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 222 L58.6 US gal
- Cooling system
- 30 L7.9 US gal
- Hydraulic tank
- 90 L23.8 US gal
- Engine oil, with filter
- 20 L5.3 US gal
- Transmission
- 21 L5.5 US gal
- Axle oil, front
- 35 L9.2 US gal
- Axle oil, rear
- 27 L7.1 US gal
Compare the Volvo L90H
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Volvo L90H
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 7.59m
- Width
- 2.49m
- Height
- 3.28m
- Weight
- 15.1t
- RoadA beavertail or flatbed truck
- SeaA 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge
Volvo L90H prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical asking price, usedmedian of 18
AED 257,500
No priced Volvo L90H for sale yet: this is all wheel loaders
About the Volvo L90H
The Volvo L90H is a 15.1-tonne wheel loader with a Volvo D6E engine rated at 134 kW (180 hp).
It carries a 2.8 m³ bucket, has a full-turn tipping load of 10,070 kg and dumps with 2.9 m clearance.
For transport it measures 7.59 m long and 2.49 m wide, and its tank holds 222 L of fuel.
A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material.
Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.
Volvo L90H questions
How much does a Volvo L90H weigh?
15,120 kg (33,334 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Volvo L90H have?
A Volvo D6E engine rated at 134 kW (180 hp) net.
What bucket size does the Volvo L90H have?
2.8 m³ (3.66 yd³), the bucket Volvo quotes it with.
What is the Volvo L90H's tipping load?
10,070 kg (22,201 lb) at full turn: the safe load is about half of it.
What are the Volvo L90H's dimensions?
7.59 m long, 2.49 m wide and 3.28 m high, from Volvo's dimension drawing.
How do you transport a Volvo L90H?
Road: a beavertail or flatbed truck. Sea: a 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge.
What is the Volvo L90H's fuel tank capacity?
222 L (58.6 US gal).
How much oil does a Volvo L90H take?
Engine oil: 20 L (5.3 US gal). Hydraulic oil: 90 L (23.8 US gal).
What are the Volvo L90H's main competitors?
The machines nearest it in size are the Cat 938K, the SANY SW940L, the XCMG ZL50GN. Each has a side-by-side comparison on EquipmentsFinder.
Is the Volvo L90H sold in the UAE?
Yes. The Volvo L90H is sold in the UAE and the Gulf, the USA, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.
What is a Volvo L90H used for?
A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material. Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.
Need a Volvo L90H on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
