Sany STC500 specs
Sany STC500 specifications
Sany STC500T5, the current 50 t STC500 truck crane (5-section U-shape boom 11.55-44.5 m, 4.8 t fixed counterweight, 8x4 chassis, DF Cummins ISLe340 30 Euro III, left-hand drive available) per Sany Global's STC500T5 product specification V1.9 (Nov 2022), SANY Panama dealer-hosted copy; the older STC500 with 42.5 m boom is not covered.
37 figures in 4 groups
Dimensions
- Overall length
- 13.9 m
- Overall width
- 2.8 m
- Overall height
- 3.8 m
- Ground clearance (minimum)
- 0.24 m
- Tail slewing radius
- 3.95 m
- Outrigger span, longitudinal x transverse
- 6.05 x 7.4 m
- Min turning radius
- 12 m
- Min turning radius of boom tip
- 14.8 m
Weight
- Gross vehicle weight
- 42,000 kg
- Axle load, axles 1 / 2 / 3 / 4
- 8 / 8 / 13 / 13 t
Crane
- Max lifting capacity
- 50 tMin. rated radius 3 m
- Max lifting moment (basic boom)
- 2,058 kN.m
- Main boom length (m, fully extended)
- 44.5 m
- Main boom length retracted (m)
- 11.55 m
- Main boom + jib length
- 60.5 m
- Boom sections
- 5
- Max tip height
- 45 m
- Counterweight
- 4.8 tFixed, no movable unit
- Jib
- F9.2 m and F16 m fixed jib, offsets 0 / 15 / 30 degOffsets from p.5
- Boom elevation angle
- -2 to 80 deg
- Main winch single-line speed (empty)
- 135m/min; rope 18 mm x 215 m, max line pull 5 t
- Auxiliary winch single-line speed (empty)
- 125m/min; rope 18 mm x 135 m
- Slewing speed
- 0-2 rpm
- Boom full extension time
- 90 s out / 100 s in
- Hook block weight
- 550 kgMain hook, 60 t rated, 6 sheaves
Chassis
- Number of axles
- 4 (wheel formula 8x4; axles 1-2 steered, 3-4 driven)
- Engine model
- DF Cummins ISLe340 30, Euro III
- Gross power
- 250 kW (335 hp)
- Max torque
- 1,425 NmAt 1,100-1,400 rpm
- Fuel tank
- 350 L
- Transmission
- 9-speed manual with synchronizer
- Tyres
- 315/80R22.5 radial
- Top speed
- 85 km/h
- Gradeability (max)
- 45%
- Fuel consumption per 100 km
- 40 L or less
- Approach angle
- 19 deg or more
- Departure angle
- 14 deg or more
Source: Sany STC500T5 product specification V1.9 (Sany Group Crane BU, Nov 2022), SANY Panama copy
Sany STC500 service
What each system holds and when Sany says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
The carrier engine moves the crane between sites; check oil and coolant before each drive because the 250 kW engine works hard at weight.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Compare the Sany STC500
The machines nearest in size, each drawn beside this one at the same scale.
Sany STC500 prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 25
AED 2,200 /day
No priced Sany STC500 for hire yet: this is all mobile cranes
No Sany STC500 for rent listed right now.
Request a Sany STC500About the Sany STC500
The Sany STC500 is a mobile crane with a DF Cummins ISLe340 30 engine rated at 250 kW (335 hp).
It lifts up to 50 t, reaches a tip height of 45 m and drives at up to 85 km/h.
For transport it measures 13.9 m long and 2.8 m wide, and its tank holds 350 L of fuel.
A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far.
Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.
Sany STC500 questions
What engine and horsepower does the Sany STC500 have?
A DF Cummins ISLe340 30 engine rated at 250 kW (335 hp) gross.
How much can a Sany STC500 lift?
Its maximum lifting capacity is 50 t (55.1 US tons), at minimum radius on full outriggers and counterweight; the load chart sets what it lifts at any other radius.
How long is the Sany STC500's boom?
The main boom extends to 44.5 m (146 ft).
What is the Sany STC500's fuel tank capacity?
350 L (92.5 US gal).
What are the Sany STC500's main competitors?
The machines nearest it in size are the Liebherr LTM 1100-4.2, the Tadano GR-500EXL, the XCMG QY50KA. Each has a side-by-side comparison on EquipmentsFinder.
Is the Sany STC500 sold in the UAE?
Yes. The Sany STC500 is sold in the UAE and the Gulf, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.
What is a Sany STC500 used for?
A mobile crane: a telescopic boom on its own wheeled carrier that drives to site, sets up on outriggers and lifts heavy loads high and far. Typical jobs: lifting steel, precast and plant on building sites, erecting tower cranes and site cabins, placing hvac units and tanks on roofs, industrial and shutdown lifts.
Need a Sany STC500 on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
