JCB 531-70 specs
JCB 531-70 dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| A | Overall height | 2.49 m8.2 ft |
| B | Overall width (over tyres) | 2.23 m7.3 ft |
| C | Inside width of cab | 0.94 m3.1 ft |
| D | Front track | 1.81 m5.9 ft |
| E | Wheelbase | 2.75 m9 ft |
| F | Overall length to front tyres | 4.38 m14.4 ft |
| G | Overall length to front carriage | 4.99 m16.4 ft |
| H | Ground clearance | 0.4 m1.3 ft |
| J | Front wheel centre to carriage | 1.25 m4.1 ft |
| K | Rear wheel centre to rear face | 0.99 m3.2 ft |
JCB 531-70 specifications
JCB 531-70 Loadall with the 63 kW Tier 3 JCB Dieselmax engine (standard), per JCB's Construction Loadalls range brochure 9999/5776 (09/14, T3) as published by JCB Qatar (Middle East); the current Stage V / Tier 4 531-70 for Europe/US differs.
23 figures in 7 groups
Dimensions
- Outside turn radius (over tyres)
- 3.7 m
- Carriage rollback angle
- 43°
- Carriage dump angle
- 38°
Lift performance
- Max lift capacity
- 3,170 kg
- Lift capacity to full height
- 2,400 kg
- Lift capacity at full reach
- 1,250 kg
- Lift height
- 7 m
- Reach at max lift height
- 0.48 m
- Max forward reach
- 3.7 m
- Reach with 1 tonne load
- 3.7 m
- Placing height
- 6.3 mEN 1459 Annex B
Weight
- Operating weight
- 7,060 kg
Engine
- Engine model
- JCB Dieselmax
- Emissions
- Tier 3 / Stage IIIA
- Gross power
- 63 kW (84 hp)
- Max torque
- 400 NmAt 1,300 rpm, standard engine
Transmission
- Transmission
- Torque converter, 4-speed powershift
- Top speed
- 29 km/h33 kph when 2/4WD select is specified
Hydraulics
- Max pressure
- 241 bar
- Pump flow
- 82 L/minMax pump flow
- Boom raise / lower time
- 7.2 / 5.4 s
- Extend / retract time
- 6.8 / 5.0 s
Tyres
- Tyres
- 15.5/80-24
Source: JCB Construction Loadalls brochure 9999/5776 09/14 Issue 1 (T3), JCB Qatar
JCB 531-70 service
What each system holds and when JCB says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 15 L
- Engine oil and filter, change every
- 500 hours
Fluid: JCB Engine Oil EP 15W-40 (rated -10 °C to +50 °C) (JCB Loadall (side engine, Tier 3) Operator Manual 9821/0300-3, dealer copy)
JCB halves the change to 250 hours for arduous work or 20% biodiesel, and asks for an oil flush at each change then.
The Dieselmax sits in a side pod beside the boom, behind a lift-up bonnet; check the dipstick daily, because a Gulf shift of heat and dust ages the oil fastest.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 146 L38.6 US gal
- Engine oil, with filter
- 15 L4 US gal
- Cooling system
- 22 L5.8 US gal
- Transmission, refill
- 21 L5.5 US gal
- Front axle housing
- 17.7 L4.7 US gal
- Front hubs (each)
- 1.9 L0.5 US gal
- Rear axle housing
- 10 L2.6 US gal
- Rear hubs (each)
- 2 L0.5 US gal
- Hydraulic tank
- 115 L30.4 US gal
Service intervals
- Engine oil and filter
- 500 hours
- Water separator fuel filter
- 500 hours
- Engine fuel filter
- 1,000 hours
- Air filter (outer)
- 1,000 hours
- Air filter (inner)
- 2,000 hours
- Coolant
- 2,000 hours
- Transmission oil
- 1,000 hours
- Transmission filter
- 500 hours
- Axle oil
- 500 hours
- Hub oil
- 500 hours
- Hydraulic oil
- 2,000 hours
- Hydraulic filter
- 500 hours
- Brake fluid
- 2,000 hours
Compare the JCB 531-70
The machines nearest in size, each drawn beside this one at the same scale.
Moving a JCB 531-70
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 4.38m
- Width
- 2.23m
- Height
- 2.49m
- Weight
- 7.1t
- RoadA beavertail or flatbed truck
- SeaA 20 ft flat rack, out of gauge (over-height): expect a surcharge
JCB 531-70 prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 6
AED 850 /day
No priced JCB 531-70 for hire yet: this is all telehandlers
About the JCB 531-70
The JCB 531-70 is a 7.06-tonne telehandler with a JCB Dieselmax engine rated at 63 kW (84 hp).
It lifts to 7 m, handles up to 3,170 kg and reaches 3.7 m forward.
For transport it measures 4.99 m long and 2.23 m wide, and its tank holds 146 L of fuel.
A telehandler: a telescopic boom on a wheeled chassis that lifts loads high and far, with forks, a bucket or a work platform on the end.
Typical jobs: lifting materials to upper floors and roofs, loading and unloading trucks, placing pallets and blocks around site, working as a rough-terrain forklift.
JCB 531-70 questions
How much does a JCB 531-70 weigh?
7,060 kg (15,565 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the JCB 531-70 have?
A JCB Dieselmax engine rated at 63 kW (84 hp) gross.
How high can a JCB 531-70 lift?
To 7 m (23 ft).
How much can a JCB 531-70 lift?
Up to 3,170 kg (6,989 lb) close in; less at full reach.
What are the JCB 531-70's dimensions?
4.38 m long, 2.23 m wide and 2.49 m high, from JCB's dimension drawing.
How do you transport a JCB 531-70?
Road: a beavertail or flatbed truck. Sea: a 20 ft flat rack, out of gauge (over-height): expect a surcharge.
What is the JCB 531-70's fuel tank capacity?
146 L (38.6 US gal).
How much oil does a JCB 531-70 take?
Engine oil: 15 L (4 US gal). Hydraulic oil: 115 L (30.4 US gal).
How often does a JCB 531-70 need an oil change?
JCB sets the engine oil and filter at every 500 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the JCB 531-70's main competitors?
The machines nearest it in size are the JCB 540-170, the Manitou MRT 4080. Each has a side-by-side comparison on EquipmentsFinder.
Is the JCB 531-70 sold in the UAE?
Yes. The JCB 531-70 is sold in the UAE and the Gulf, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.
What is a JCB 531-70 used for?
A telehandler: a telescopic boom on a wheeled chassis that lifts loads high and far, with forks, a bucket or a work platform on the end. Typical jobs: lifting materials to upper floors and roofs, loading and unloading trucks, placing pallets and blocks around site, working as a rough-terrain forklift.
Need a JCB 531-70 on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
