EF Logo

Komatsu PC210 vs Komatsu PC400

The Komatsu PC400 is the heavier machine, at 41.7 t against 20.5 t, and the Komatsu PC400 has more power (257 kW against 123 kW).

The Komatsu PC210 is ahead on: turns tighter, narrower to transport, lower to transport. The Komatsu PC400 is ahead on: more power, digs deeper, reaches further, dumps higher, bigger bucket or body, more digging or pushing force, more hydraulic flow, bigger fuel tank.

Below, every figure both makers publish sits side by side, with the Komatsu PC210 and the Komatsu PC400 drawn to the same scale from their dimension drawings.

  1. Komatsu · excavator

    Komatsu PC210

    Full specsPDF

  2. Komatsu · excavator

    Komatsu PC400

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureKomatsu PC210Komatsu PC400
Operating weight20,500 kg41,740 kg
Gross powerHigher is better123 kW270 kW+120%
Max digging depthHigher is better6.515 m7.82 m+20%
Max digging reachHigher is better9.86 m12.025 m+22%
Max dumping heightHigher is better7.16 m7.565 m+6%
Bucket capacityHigher is better1 m³1.9 m³+90%
Bucket digging forceHigher is better149 kN275 kN+85%
Pump flowHigher is better475 L/min690 L/min+45%
Fuel tankHigher is better400 L650 L+63%
Tail swing radiusLower is better2.9 m+20%3.645 m
Overall widthLower is better2.8 m+18%3.43 m
Overall height (to top of boom)Lower is better3.005 m+17%3.635 m
Overall length9.55 m11.94 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length9.55 m11.94 m
Length on ground (transport)4.825 m6.54 m
Overall height (to top of boom)3.005 m3.635 mwith grousers
Overall width2.8 m3.43 m
Overall height (to top of cab)3.045 m3.285 mwith grousers
Ground clearance, counterweight1.085 m1.32 m
Ground clearance (minimum)0.44 m0.555 m
Tail swing radius2.9 m3.645 m
Track length on ground3.275 m4.02 m
Track length4.07 m5.055 m
Track gauge2.2 m2.74 m
Width of crawler2.8 m3.34 m
Shoe width0.6 m0.6 m
Grouser height0.026 mNot published
Machine cab height2.095 mNot published
Machine cab width2.71 mNot published
Swing centre to rear end2.86 m3.605 m

Working range

Max digging height10.065 m10.915 m
Max dumping height7.16 m7.565 m
Max digging depth6.515 m7.82 m3.38 m arm
Max vertical wall digging depth5.81 mNot published
Max digging reach9.86 m12.025 m
Max reach at ground level9.68 m11.82 m
Min front swing radius2.99 mNot published

Performance

Bucket capacity1 m³1.9 m³heaped; 1.3 to 2.8 m³ offered
Bucket digging force149 kN275 kNISO 6015
Arm digging force108 kN214 kNISO 6015
Bucket digging force (SAE)132 kNNot published
Arm digging force (SAE)103 kNNot published
Swing speed12.4 min-19.1 rpm
Travel speed (high)5.5 km/hAuto-shift; mid 4.1 km/h, low 3.0 km/hNot published
Max drawbar pull178 kN18,200 kgfNot published
Gradeability35°70%Not published

Weight

Operating weight20,500 kg41,740 kg600 mm shoes
Operating weight (700 mm shoes)20,900 kgNot published
Operating weight (800 mm shoes)21,100 kgNot published
Operating weight (500 mm shoes)20,400 kgNot published
Ground pressure46.8 kPaPC210-10M0, 600 mm shoes; 0.48 kgf/cm2Not published

Engine

Engine modelKomatsu SAA6D107E-1Komatsu SAA6D125E-5
EmissionsEU Stage 3A emission equivalentTier 2 / Stage 2 equivalent
Cylinders66
Bore107 mmNot published
Stroke124 mmNot published
Displacement6.7 L11 L
Gross power123 kW (165 HP)SAE J1995, at 2000 min-1270 kW (362 hp)at 1,900 rpm
Net power123 kW (165 HP)257 kW (345 hp)at 1,900 rpm

Hydraulics

Pump flow475 L/min690 L/min
Max pressure37.3 MPa (380 kgf/cm2)373 barimplement circuits
Max pressure, swing28.9 MPa (295 kgf/cm2)Relief valve settingNot published
Working modes6Selectable working modesNot published

Undercarriage

Track rollers (each side)7PC210-10M0 (LC: 9)Not published
Carrier rollers (each side)2Not published
Track shoes (each side)45PC210-10M0 (LC: 49)Not published

Service capacities

Fuel tank400 L650 L
Cooling system21.8 LCoolant36 L
Engine oil23.1 LRefill capacity ("Engine")37 L
Final drive (each)3.3 L10.5 L
Swing drive5.3 L20 L
Hydraulic tank135 L248 L

Service intervals

Hydraulic oil filter2,500 hoursKomatsu: 2.5 times the earlier 1,000 hNot published
Engine oil and filterNot published500 hours
Hydraulic filterNot published1,000 hours
Hydraulic oilNot published5,000 hours

Swing, travel and hydraulics

Travel speedsNot published5.5 / 4.0 / 3.0 km/h

Sources: Komatsu PC210/210LC-10M0 brochure CEN00820-03 (Komatsu Middle East) · Komatsu PC400-8R brochure CEN00273-05 (Komatsu Middle East)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m11 m
Komatsu PC210Komatsu PC400Same scale, front edges and ground lined up.

Komatsu PC210 vs Komatsu PC400: questions

Which is bigger, the Komatsu PC210 or Komatsu PC400?

By operating weight the Komatsu PC400 is the biggest at 41.7 t, then the Komatsu PC210 at 20.5 t.

Which has more power, the Komatsu PC210 or Komatsu PC400?

The Komatsu PC400: Komatsu PC210 123 kW (165 HP), Komatsu PC400 270 kW (362 hp) (gross power), a 120% difference.

Which digs deeper, the Komatsu PC210 or Komatsu PC400?

The Komatsu PC400: Komatsu PC210 6.515 m, Komatsu PC400 7.82 m (max digging depth), a 20% difference.

Which reaches further, the Komatsu PC210 or Komatsu PC400?

The Komatsu PC400: Komatsu PC210 9.86 m, Komatsu PC400 12.025 m (max digging reach), a 22% difference.

Which has the bigger bucket, the Komatsu PC210 or Komatsu PC400?

The Komatsu PC400: Komatsu PC210 1 m³, Komatsu PC400 1.9 m³ (bucket capacity), a 90% difference.

Which has the bigger fuel tank, the Komatsu PC210 or Komatsu PC400?

The Komatsu PC400: Komatsu PC210 400 L, Komatsu PC400 650 L (fuel tank), a 63% difference.

Which turns tighter, the Komatsu PC210 or Komatsu PC400?

The Komatsu PC210: Komatsu PC210 2.9 m, Komatsu PC400 3.645 m (tail swing radius), a 20% difference.

Which is narrower to transport, the Komatsu PC210 or Komatsu PC400?

The Komatsu PC210: Komatsu PC210 2.8 m, Komatsu PC400 3.43 m (overall width), a 18% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.