EF Logo

Cat D10 vs Cat D8

The Cat D10 is the heavier machine, at 70.3 t against 39 t, and the Cat D10 has more power (450 kW against 271 kW).

The Cat D10 is ahead on: more power, digs deeper, bigger bucket or body, more hydraulic flow, bigger fuel tank, faster. The Cat D8 is ahead on: narrower to transport.

Below, every figure both makers publish sits side by side, with the Cat D10 and the Cat D8 drawn to the same scale from their dimension drawings.

  1. Cat · dozer

    Cat D10

    Full specsPDF

  2. Cat · dozer

    Cat D8

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat D10Cat D8
Operating weight70,256 kg39,000 kg
Net powerHigher is better450 kW+66%271 kW
Digging depthHigher is better0.641 m+11%0.576 m
Blade capacityHigher is better18.5 m³+80%10.3 m³
Pump flowHigher is better424 L/min+64%259 L/min
Fuel tankHigher is better1,269 L+103%624 L
Travel speed, forward (max)Higher is better12.5 km/h+21%10.3 km/h
Width over tracksLower is better3.311 m2.79 m+16%

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length (with blade)7.416 mLength with 10SU blade, no rear attachment7.91 m
Overall length (blade and ripper)9.158 mSU blade and single-shank ripperNot published
Overall length (base machine)5.324 mOverall length, basic dozer4.76 mLength of basic tractor
Length with single-shank ripper7.081 mNo bladeNot published
Length with U-blade7.75 mNot published
Length with multi-shank ripper7.241 mNot published
Height (to top of cab)4.134 mFOPS cab, incl. grouser3.53 m
Height (to top of ROPS/canopy)4.406 mNot published
Height (to top of stack)4.356 mNot published
Track gauge2.55 m2.08 mStandard; LGP 2.34 m
Width over tracks3.311 mWidth without trunnions, 610 mm ES shoes2.79 m
Width over trunnions3.759 mNot published
Blade width4.94 m10SU ABR blade, over end bits; 10U 5260 mm4.038 mSU blade, across end bits; U 4263 mm
Blade height2.12 m10SU / 10U ABR1.747 mSU blade
Track length on ground3.88 m3.21 m
Ground clearance0.725 m0.622 m
Shoe width0.61 mExtreme service; 710/786 mm optional0.61 mStandard; LGP 965 mm
Grouser height0.093 m0.084 mExtreme service
Height (to top of guardrail)Not published3.39 m
SU blade (add to basic tractor)Not published1.417 m
Single-shank ripper (add to basic tractor)Not published1.725 mTip at ground line, shank pin in middle hole
Drawbar (add to basic tractor)Not published0.295 m

Weight

Operating weight70,256 kg39,000 kg
Shipping weight50,684 kg10% fuel, FOPS cab, 610 mm ES shoes34,030 kg10% fuel, with ripper
Blade weight (10SU, with cylinders and push arms)9,421 kgNot published
Operating weight (LGP)Not published37,585 kgWith drawbar
Blade weight (SU, with push arms)Not published4,539 kg

Performance

Blade capacity18.5 m³10SU ABR, SAE J1265; 10U ABR 22.0 m³10.3 m³SU blade, ISO 9246; U 11.8 m³, angle 6.1 m³
Digging depth0.641 mNominal blade pitch (640.87 mm)0.576 m
Blade lift height1.523 mNominal blade pitch1.246 m
Maximum tilt1.43 m10SU, each sideNot published
Ripper maximum penetration1.504 mSingle shank, standard tip1.13 mSingle shank
Ripper maximum penetration force219 kNSingle shank, standard127 kNSingle shank
Ripper pryout force512 kNSingle shank, standardNot published
Maximum tilt at blade cornerNot published0.573 m
Ground pressureNot published88.5 kPaISO 16754
Maximum drawbar pullNot published642 kN1.0 forward

Engine

Engine modelCat C27Cat C15
EmissionsU.S. EPA Tier 2 equivalent (Tier 4 Final / EU Stage V also offered)Brazil MAR-1 / UN ECE R96 Stage IIIA (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)
Net power450 kW (603 hp)271 kW (363 hp)At 2,050 rpm, ISO 9249 / SAE J1349
Gross power471 kW (631 hp)Forward, SAE J1995; reverse 571 kW296 kW (397 hp)
Displacement27 L15.2 L

Transmission

TransmissionPlanetary powershift, 3 forward / 3 reversePowershift, 3 forward / 3 reverse (half-step ranges)
Travel speed, forward (max)12.5 km/h3.0 forward10.3 km/h3.0 forward
Travel speed, reverse (max)15.7 km/h3.0 reverse10.3 km/h3.0 reverse

Undercarriage

UndercarriageElevated sprocket, suspension type, 44 shoes and 8 track rollers per sideElevated sprocket, 44 sections, 8 bottom rollers

Hydraulics

Pump flow424 L/minImplement pump, 2,010 rpm259 L/minImplement pump, 1,850 rpm
Max pressure280 barLift cylinder relief valve 28 000 kPa240 bar

Service capacities

Fuel tank1,269 LTotal; usable 1224 L624 L
Cooling system175 LRefill, Tier 4 Final engine72 L
Engine oil, with filter103 LEngine crankcase sump43 LEngine crankcase
Power train308 LTotal volume208 L
Final drives (each)23 L12.5 L
Hydraulic tank160 LHydraulic system, tank only69 L

Service intervals

Hydraulic oil6,000 hours6,000 hours
Coolant12,000 hours12,000 hours
Engine oil and filterNot published500 hours
Power train oilNot published1,000 hours

Ripper

Ripper weight (single shank)Not published4,070 kg

Sources: Cat D10 Dozer Technical Specifications AEXQ3209-03 (09-2026), build 07A (Global) · Cat D8 Track-Type Tractor Technical Specifications AEXQ3722 (05-2024), build 22A (AME excl. Saudi Arabia, ANZ, China, S Am)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m
Cat D10Cat D8Same scale, front edges and ground lined up.

Cat D10 vs Cat D8: questions

Which is bigger, the Cat D10 or Cat D8?

By operating weight the Cat D10 is the biggest at 70.3 t, then the Cat D8 at 39 t.

Which has more power, the Cat D10 or Cat D8?

The Cat D10: Cat D10 450 kW (603 hp), Cat D8 271 kW (363 hp) (net power), a 66% difference.

Which digs deeper, the Cat D10 or Cat D8?

The Cat D10: Cat D10 0.641 m, Cat D8 0.576 m (digging depth), a 11% difference.

Which has the bigger bucket, the Cat D10 or Cat D8?

The Cat D10: Cat D10 18.5 m³, Cat D8 10.3 m³ (blade capacity), a 80% difference.

Which has the bigger fuel tank, the Cat D10 or Cat D8?

The Cat D10: Cat D10 1,269 L, Cat D8 624 L (fuel tank), a 103% difference.

Which is narrower to transport, the Cat D10 or Cat D8?

The Cat D8: Cat D10 3.311 m, Cat D8 2.79 m (width over tracks), a 16% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.