EF Logo

Cat 980 vs Komatsu WA470

The Cat 980 is the heavier machine, at 30.3 t against 23.3 t, and the Cat 980 has more power (282 kW against 203 kW).

The Cat 980 is ahead on: more power, dumps higher, reaches higher, bigger bucket or body, lifts or carries more, more digging or pushing force, more hydraulic flow, bigger fuel tank, faster. The Komatsu WA470 is ahead on: narrower to transport, lower to transport.

Below, every figure both makers publish sits side by side, with the Cat 980 and the Komatsu WA470 drawn to the same scale from their dimension drawings.

  1. Cat · wheel loader

    Cat 980

    Full specsPDF

  2. Komatsu · wheel loader

    Komatsu WA470

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 980Komatsu WA470
Operating weight30,344 kg23,295 kg
Gross powerHigher is better303 kW+49%204 kW
Dump clearance at max liftHigher is better3.287 m+3%3.185 m
Hinge pin height (max lift)Higher is better4.554 m+4%4.36 m
Bucket capacityHigher is better5.4 m³+29%4.2 m³
Static tipping load (full turn)Higher is better19,706 kg+24%15,875 kg
Breakout forceHigher is better227 kN+18%192 kN
Pump flowHigher is better449 L/min+73%260 L/min
Fuel tankHigher is better426 L+3%413 L
Top speedHigher is better39.5 km/h+9%36.2 km/h
Width over tyresLower is better3.24 m3.01 m+7%
Height to top of cabLower is better3.829 m3.5 m+9%

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length (bucket on ground)9.673 m8.825 m
Overall length (without bucket)8.155 mStandard liftNot published
Wheelbase3.8 m3.45 m
Height to top of cab3.829 mHeight to top of ROPS3.5 mOverall height, ROPS cab
Height to top of exhaust3.764 m3.08 mOverall height, top of the stack
Height to top of hood3.064 mNot published
Ground clearance0.456 m0.525 m
Tread width2.44 m2.3 m
Width over tyres3.24 mUnloaded, over tyre bulge3.01 m
Bucket width3.447 m3.17 m
Hinge pin height (max lift)4.554 mStandard lift4.36 mStandard boom (high-lift boom 4870 mm)
Dump clearance at max lift3.287 m3.185 m
Reach at max lift1.481 m1.235 m
Overall height, bucket at max lift6.435 m5.96 m
Rear axle to rear bumper2.661 mNot published
Turning radius (outside of bucket)7.612 mNot published
Clearance circle (dia) to outside of tyres13.7 mNot published
Hitch heightNot published1.24 m
Bucket pin height at carryNot published0.585 mStandard boom
Loader clearance circle diameterNot published15.28 m
Turning radius (centre of outside tyre)Not published6.63 m

Weight

Operating weight30,344 kg23,295 kg
Operating weight rangeNot published23 205 – 24 955 kg

Engine

Engine modelCat C13Komatsu SAA6D125E-5
EmissionsBrazil MAR-1 / UN ECE R96 Stage IIIA / China Nonroad Stage III (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)U.S. EPA Tier 2 / EU Stage 2 equivalent
Displacement12.5 L11 L
Gross power303 kW (406 hp)ISO 14396:2002 @ 1,800 rpm204 kW (273 HP)SAE J1995 @ 2,000 rpm
Gross power (SAE J1995:2014)307 kW (412 hp)SAE J1995:2014 @ 1,800 rpmNot published
Net power282 kW (378 hp)ISO 9249:2007 / SAE J1349:2011 @ 1,800 rpm203 kW (272 HP)
Max torque2,172 NmISO 14396:2002 @ 1,300 rpmNot published
CylindersNot published6

Performance

Bucket capacity5.4 m³4.2 m³
Bucket capacity range4.0–14.5 m³ (5.25–19.0 yd³)3.6 – 5.2 m³
Static tipping load (full turn)19,706 kg15,875 kg
Breakout force227 kNMachine configuration defined under "Weight"192 kN
Top speed39.5 km/h36.2 km/h

Hydraulics

Pump flow449 L/minImplement pump, maximum output at 2,250 rpm260 L/minLoader control piston pump at rated rpm
Max pressure343 bar343 bar
Steering pump flowNot published195 L/minAt rated rpm; relief 24.5 MPa

Transmission

Forward 16.9 km/h7.6 km/h
Forward 213.3 km/h13.1 km/h
Forward 323.5 km/h22.9 km/h
Forward 439.5 km/h36.2 km/h
Reverse 17.8 km/h7.9 km/h
Reverse 215.2 km/h13.5 km/h
Reverse 326.9 km/h23.6 km/h
Reverse 439.5 km/h37.3 km/h

Tyres

TyresBridgestone 29.5R25 VSNT L4 radial26.5R25 (L-3)

Service capacities

Fuel tank426 L413 LSpecified capacity
Cooling system50 L61 L
Engine oil, with filter37 LNot published
Transmission77 LFull-powershift, countershaft type; 3-element torque converter; 4F/4R
Differentials and final drives, front84 LNot published
Differentials and final drives, rear84 LNot published
Hydraulic tank153 LNot published
Engine oilNot published38 L
Hydraulic system, with tankNot published173 L
Torque converter and transmissionNot published65 L
Axle, frontNot published60 L
Axle, rearNot published56 L

Service intervals

Engine oil and filterNot published500 hours
Fuel pre-filterNot published500 hours
Fuel main filterNot published1,000 hours
Transmission oil and filterNot published1,000 hoursAlso clean the strainer
Hydraulic oil and filterNot published2,000 hours
Axle oilNot published2,000 hours
CoolantNot published4,000 hours

Sources: Cat 980 Wheel Loader Technical Specifications AEXQ3162-00 (3-2021), Tier 3-equivalent · Komatsu WA470-6R brochure CEN00309-04 (Komatsu Middle East, en-ae)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m
Cat 980Komatsu WA470Same scale, front edges and ground lined up.

Cat 980 vs Komatsu WA470: questions

Which is bigger, the Cat 980 or Komatsu WA470?

By operating weight the Cat 980 is the biggest at 30.3 t, then the Komatsu WA470 at 23.3 t.

Which has more power, the Cat 980 or Komatsu WA470?

The Cat 980: Cat 980 303 kW (406 hp), Komatsu WA470 204 kW (273 HP) (gross power), a 49% difference.

Which has the bigger bucket, the Cat 980 or Komatsu WA470?

The Cat 980: Cat 980 5.4 m³, Komatsu WA470 4.2 m³ (bucket capacity), a 29% difference.

Which lifts or carries more, the Cat 980 or Komatsu WA470?

The Cat 980: Cat 980 19,706 kg, Komatsu WA470 15,875 kg (static tipping load (full turn)), a 24% difference.

Which has the bigger fuel tank, the Cat 980 or Komatsu WA470?

The Cat 980: Cat 980 426 L, Komatsu WA470 413 L (fuel tank), a 3% difference.

Which is narrower to transport, the Cat 980 or Komatsu WA470?

The Komatsu WA470: Cat 980 3.24 m, Komatsu WA470 3.01 m (width over tyres), a 7% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.