EF Logo

Cat 938K vs Komatsu WA470

The Komatsu WA470 is the heavier machine, at 23.3 t against 15.3 t, and the Komatsu WA470 has more power (203 kW against 136 kW).

The Cat 938K is ahead on: faster, narrower to transport, lower to transport. The Komatsu WA470 is ahead on: more power, dumps higher, reaches higher, bigger bucket or body, lifts or carries more, more hydraulic flow, bigger fuel tank.

Below, every figure both makers publish sits side by side, with the Cat 938K and the Komatsu WA470 drawn to the same scale from their dimension drawings.

  1. Cat · wheel loader

    Cat 938K

    Full specsPDF

  2. Komatsu · wheel loader

    Komatsu WA470

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 938KKomatsu WA470
Operating weight15,282 kg23,295 kg
Gross powerHigher is better140 kW204 kW+46%
Dump clearance at max liftHigher is better2.822 m3.185 m+13%
Hinge pin height (max lift)Higher is better3.969 m4.36 m+10%
Bucket capacityHigher is better2.7 m³4.2 m³+56%
Static tipping load (full turn)Higher is better9,633 kg15,875 kg+65%
Pump flowHigher is better190 L/min260 L/min+37%
Fuel tankHigher is better195 L413 L+112%
Top speedHigher is better40 km/h+10%36.2 km/h
Width over tyresLower is better2.693 m+11%3.01 m
Height to top of cabLower is better3.34 m+5%3.5 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Height to top of cab3.34 mGround to cab3.5 mOverall height, ROPS cab
Height to top of beacon3.707 mNot published
Ground to axle centre0.685 mNot published
Ground clearance0.386 m0.525 m
Overall length (bucket on ground)7.666 m8.825 m
Rear axle to rear bumper1.968 mNot published
Hitch to front axle1.525 mNot published
Wheelbase3.05 m3.45 m
Dump clearance at max lift2.822 m3.185 m
Load-over height3.354 mNot published
Clearance, level bucket at max lift3.642 mNot published
Hinge pin height (max lift)3.969 m4.36 mStandard boom (high-lift boom 4870 mm)
Overall height, bucket at max lift5.301 m5.96 m
Reach at max lift1.146 m1.235 m
Bucket pin height at carry0.418 m0.585 mStandard boom
Dig depth0.1 mNot published
Bucket width2.75 m3.17 m
Tread width2.083 mTread centre2.3 m
Width over tyres2.693 m3.01 m
Turning radius (outside of bucket)6.127 mNot published
Turning radius (outside of tyres)5.546 mNot published
Turning radius (inside of tyres)2.843 mNot published
Height to top of exhaustNot published3.08 mOverall height, top of the stack
Hitch heightNot published1.24 m
Loader clearance circle diameterNot published15.28 m
Turning radius (centre of outside tyre)Not published6.63 m

Angles

Rack-back angle at full lift54°Not published
Dump angle at full lift49°Not published
Rack-back angle at carry44°Not published
Angle of departure33°Not published
Articulation angle40°Not published

Weight

Operating weight15,282 kg23,295 kg
Operating weight rangeNot published23 205 – 24 955 kg

Engine

Engine modelCat C7.1Komatsu SAA6D125E-5
EmissionsU.S. EPA Tier 3 / EU Stage IIIA / Brazil MAR-1 equivalentU.S. EPA Tier 2 / EU Stage 2 equivalent
Displacement7 L11 L
Gross power140 kW (188 hp)204 kW (273 HP)SAE J1995 @ 2,000 rpm
Gross power (Standard Mode)129 kW (173 hp)Not published
Net power136 kW (182 hp)SAE J1349, Performance Mode at 1,800 rpm203 kW (272 HP)
Net power (Standard Mode)126 kW (169 hp)SAE J1349, Standard Mode at 1,600 rpmNot published
Max torque912 NmNot published
Max torque (net)876 NmNot published
CylindersNot published6

Performance

Bucket capacity2.7 m³4.2 m³
Bucket capacity range (general purpose)2.5-3.2 m³ (3.2-4.2 yd³)Not published
Bucket capacity range (light material)3.1-5.0 m³ (4.0-6.5 yd³)Not published
Static tipping load (straight)11,312 kgISO 14397-1; standard liftNot published
Static tipping load (full turn)9,633 kgISO 14397-1; standard lift15,875 kg
Breakout force13,082 kgf192 kN
Top speed40 km/hRange 4, forward and reverse36.2 km/h
Bucket capacity rangeNot published3.6 – 5.2 m³

Hydraulics

Pump flow190 L/minImplement pump, maximum flow260 L/minLoader control piston pump at rated rpm
Max pressure250 bar343 bar
Tilt cylinder relief pressure300 barNot published
Steering pump flow130 L/minMaximum flow195 L/minAt rated rpm; relief 24.5 MPa
Steering pump pressure241 barNot published

Transmission

TransmissionHydrostatic, 4 speed ranges, electronic controlFull-powershift, countershaft type; 3-element torque converter; 4F/4R
Range 113 km/hNot published
Range 213 km/hNot published
Range 327 km/hNot published
Range 440 km/hNot published
Forward 1Not published7.6 km/h
Forward 2Not published13.1 km/h
Forward 3Not published22.9 km/h
Forward 4Not published36.2 km/h
Reverse 1Not published7.9 km/h
Reverse 2Not published13.5 km/h
Reverse 3Not published23.6 km/h
Reverse 4Not published37.3 km/h

Tyres

Tyres20.5 R25 radial (L-3)26.5R25 (L-3)

Service capacities

Fuel tank195 L413 LSpecified capacity
Cooling system32 L61 L
Engine oil, with filter19.5 LNot published
Differentials and final drives, front35 LNot published
Differentials and final drives, rear35 LNot published
Hydraulic system, with tank170 L173 L
Hydraulic tank90 LNot published
Engine oilNot published38 L
Torque converter and transmissionNot published65 L
Axle, frontNot published60 L
Axle, rearNot published56 L

Service intervals

Engine oil and filter500 hoursCat DEO-ULS500 hours
Fuel filters500 hoursPrimary and secondaryNot published
Engine air filter1,000 hoursPrimary and secondary elementsNot published
Hydraulic oil filter2,000 hoursNot published
Transmission oil and filter2,000 hoursCat TDTO1,000 hoursAlso clean the strainer
Differential oil (front and rear)2,000 hoursNot published
Hydraulic oil6,000 hoursCat HYDO AdvancedNot published
Coolant extender6,000 hoursCat ELC ExtenderNot published
Coolant12,000 hoursCat ELC4,000 hours
Fuel pre-filterNot published500 hours
Fuel main filterNot published1,000 hours
Hydraulic oil and filterNot published2,000 hours
Axle oilNot published2,000 hours

Sources: Cat 938K Wheel Loader specifications AEHQ7682-01 (04-2021) (AME, AUZ, CIS, LACD, Southeast Asia, Turkey) · Komatsu WA470-6R brochure CEN00309-04 (Komatsu Middle East, en-ae)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m
Cat 938KKomatsu WA470Same scale, front edges and ground lined up.

Cat 938K vs Komatsu WA470: questions

Which is bigger, the Cat 938K or Komatsu WA470?

By operating weight the Komatsu WA470 is the biggest at 23.3 t, then the Cat 938K at 15.3 t.

Which has more power, the Cat 938K or Komatsu WA470?

The Komatsu WA470: Cat 938K 140 kW (188 hp), Komatsu WA470 204 kW (273 HP) (gross power), a 46% difference.

Which has the bigger bucket, the Cat 938K or Komatsu WA470?

The Komatsu WA470: Cat 938K 2.7 m³, Komatsu WA470 4.2 m³ (bucket capacity), a 56% difference.

Which lifts or carries more, the Cat 938K or Komatsu WA470?

The Komatsu WA470: Cat 938K 9,633 kg, Komatsu WA470 15,875 kg (static tipping load (full turn)), a 65% difference.

Which has the bigger fuel tank, the Cat 938K or Komatsu WA470?

The Komatsu WA470: Cat 938K 195 L, Komatsu WA470 413 L (fuel tank), a 112% difference.

Which is narrower to transport, the Cat 938K or Komatsu WA470?

The Cat 938K: Cat 938K 2.693 m, Komatsu WA470 3.01 m (width over tyres), a 11% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.