Cat 950 specs
- bucket capacity
- 3.1 m³
- net power
- 172 kW (231 hp)
- operating weight
- 18,076 kg
- static tipping load (full turn)
- 10,936 kg
Cat 950 dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| 12 | Overall length (bucket on ground) | 8.238 m27'0" |
| 11 | Overall length (without bucket) | 6.797 m22'3" |
| 10 | Wheelbase | 3.35 m10'11" |
| 4 | Height to top of cab | 3.456 m11'4" |
| 3 | Height to top of exhaust | 3.408 m11'2" |
| 2 | Height to top of hood | 2.695 m8'10" |
| 7 | Ground clearance | 0.354 m1'1" |
| 26 | Tread width | 2.14 m7'0" |
| 25 | Width over tyres | 2.8 m9'3" |
| 14 | Hinge pin height (max lift) | 3.981 m13'0" |
| 16 | Dump clearance at max lift | 2.844 m9'3" |
| 17 | Reach at max lift | 1.325 m4'4" |
| B | Overall height, bucket at max lift | 5.313 m17'6" |
| 8 | Rear axle to rear bumper | 1.942 m6'4" |
| 23 | Clearance circle (dia) to outside of tyres | 12.028 m39'6" |
Cat 950 specifications
Current Cat 950 (C7.1, Brazil MAR-1 / Tier 3-equivalent engine column of the sheet, standard lift, 3.1 m³ GP bucket) as linked from Al-Bahar's 950 page; the separate, lower-spec 950 GC is not covered.
26 figures in 7 groups
Dimensions
- Bucket width
- 2.927 m
- Turning radius (outside of bucket)
- 6.679 m
Weight
- Operating weight
- 18,076 kg
Engine
- Engine model
- Cat C7.1
- Emissions
- Brazil MAR-1 / UN ECE R96 Stage IIIA (equivalent to U.S. EPA Tier 3 / EU Stage IIIA)
- Displacement
- 7 L
- Gross power
- 186 kW (249 hp)ISO 14396:2002 @ 2,100 rpm
- Gross power (SAE J1995:2014)
- 191 kW (256 hp)SAE J1995:2014 @ 2,100 rpm
- Net power
- 172 kW (231 hp)ISO 9249:2007 / SAE J1349:2011 @ 2,100 rpm
- Max torque
- 1,236 NmISO 14396:2002 @ 1,400 rpm
Performance
- Bucket capacity
- 3.1 m³
- Bucket capacity range
- 2.5–9.9 m³ (3.3–13.0 yd³)
- Static tipping load (full turn)
- 10,936 kg
- Breakout force
- 152 kNMachine configuration defined under "Weight"
- Top speed
- 39.5 km/hForward 5, empty bucket, standard L3 tyres
Hydraulics
- Pump flow
- 322 L/minImplement pump, maximum output at 2,340 rpm
- Max pressure
- 279 bar
Transmission
- Forward 1
- 6.9 km/h
- Forward 2
- 12 km/h
- Forward 3
- 19.3 km/h
- Forward 4
- 25.7 km/h
- Forward 5
- 39.5 km/h
- Reverse 1
- 6.9 km/h
- Reverse 2
- 12 km/h
- Reverse 3
- 25.7 km/h
Tyres
- Tyres
- Bridgestone 23.5R25 VJT L3 radial
Source: Cat 950 Wheel Loader Technical Specifications AEXQ3868-00 (7-2024)
Cat 950 service
What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine crankcase
- 21 L
- Engine oil and filter, change every
- 1,000 hours
Fluid: Cat DEO-ULS SAE 15W-40 (rated -10 to 50 °C) (Cat Machine Fluids Recommendations SEBU6250-30 (Dec 2020))
Intervals are from Cat's planned-maintenance chart for the 950M/962M, the build this 950 replaced; confirm them in the manual for your serial number.
Oil carries heat and grit out of the engine; a loader idling and digging in Gulf heat and dust wears its oil faster than the hour meter suggests, so change it on time and sample it.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 259.5 L68.6 US gal
- Cooling system
- 54 L14.3 US gal
- Engine crankcase
- 21 L5.5 US gal
- Transmission
- 43 L11.4 US gal
- Differentials and final drives, front
- 43 L11.4 US gal
- Differentials and final drives, rear
- 43 L11.4 US gal
- Hydraulic tank
- 97 L25.6 US gal
Service intervals
- Engine oil and filter
- 1,000 hours
- Fuel filters
- 500 hours
- Hydraulic oil filters
- 1,000 hours
- Transmission oil filter
- 1,000 hours
- Transmission oil
- 2,000 hours
- Differential oil (front and rear)
- 2,000 hours
- Hydraulic oil
- 3,000 hours
- Coolant extender
- 6,000 hours
- Coolant
- 12,000 hours
Compare the Cat 950
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Cat 950
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 8.24m
- Width
- 2.8m
- Height
- 3.46m
- Weight
- 18.1t
- RoadA 3 or 4-axle lowbed
- Width2.80 m wide: over 2.6 m usually needs an oversize permit and escort
- SeaA 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge
Cat 950 prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 18
AED 1,150 /day
No priced Cat 950 for hire yet: this is all wheel loaders
No Cat 950 for rent listed right now.
Request a Cat 950About the Cat 950
The Cat 950 is a 18.1-tonne wheel loader with a Cat C7.1 engine rated at 172 kW (231 hp).
It carries a 3.1 m³ bucket, has a full-turn tipping load of 10,936 kg and dumps with 2.844 m clearance.
For transport it measures 8.238 m long and 2.8 m wide, and its tank holds 259.5 L of fuel.
A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material.
Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.
Cat 950 questions
How much does a Cat 950 weigh?
18,076 kg (39,851 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Cat 950 have?
A Cat C7.1 engine rated at 172 kW (231 hp) net.
What bucket size does the Cat 950 have?
3.1 m³ (4.05 yd³), the bucket Cat quotes it with.
What is the Cat 950's tipping load?
10,936 kg (24,110 lb) at full turn: the safe load is about half of it.
What are the Cat 950's dimensions?
8.24 m long, 2.80 m wide and 3.46 m high, from Cat's dimension drawing.
How do you transport a Cat 950?
Road: a 3 or 4-axle lowbed. Width: 2.80 m wide: over 2.6 m usually needs an oversize permit and escort. Sea: a 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge.
What is the Cat 950's fuel tank capacity?
259.5 L (68.6 US gal).
How much oil does a Cat 950 take?
Engine oil: 1,000 hours. Hydraulic oil: 97 L (25.6 US gal).
How often does a Cat 950 need an oil change?
Cat sets the engine oil and filter at every 1,000 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the Cat 950's main competitors?
The machines nearest it in size are the XCMG ZL50GN, the Volvo L120, the Cat 938K. Each has a side-by-side comparison on EquipmentsFinder.
Is the Cat 950 sold in the UAE?
Yes. The Cat 950 is sold in the UAE and the Gulf, the USA, other markets worldwide; builds can differ by market, so check emissions and options with the dealer.
What is a Cat 950 used for?
A wheel loader: a big bucket on two lift arms at the front of an articulated, wheeled machine that loads, carries and stockpiles material. Typical jobs: loading trucks from stockpiles, moving sand, aggregate and soil around site, feeding crushers and batching plants, clearing and backfilling.
Need a Cat 950 on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
