Cat 430 specs
- dig depth
- 4.612 m
- net power
- 80 kW (107 hp)
- operating weight
- 8,188 kg
- shovel capacity
- 0.96 m³
Cat 430 dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| 1 | Overall length (loader on ground) | 7.273 m23'10" |
| 2 | Total travel height | 3.845 m12'7" |
| 3 | Cab roof height | 2.815 m9'3" |
| 4 | Height to top of exhaust stack | 2.72 m8'11" |
| 5 | Rear axle centreline to front grille | 2.706 m8'11" |
| 6 | Wheelbase | 2.2 m7'3" |
Cat 430 specifications
Current-generation Cat 430 backhoe loader (C3.6 86 kW, Tier 4 Final / Stage V, North American spec sheet AEHQ8245-03), standard-stick, AWD power-shift, 0.96 m³ GP pin-on loader bucket configuration; Al-Bahar (UAE) lists no 430 (its range is 426, 426F2, 428, 432, 434, 444), so the North American sheet is used.
60 figures in 9 groups
Dimensions
- Total travel length
- 7.304 m
- Overall width
- 2.248 m
- Shovel width (GP shovel)
- 2.262 m
- Height to loader hinge pin (transport)
- 0.378 m
- Ground clearance (LH step)
- 0.316 m
- Ground clearance (AWD guard)
- 0.312 m
- Ground clearance (485 kg counterweight)
- 0.289 m
- Front wheel tread gauge
- 1.895 m
- Rear wheel tread gauge
- 1.728 m
- Turning circle, outside front wheels
- 8.205 mInner wheel not braked
- Turning circle, outside widest loader bucket
- 10.745 mInner wheel not braked
Stabilisers
- Stabiliser spread, operating (centre)
- 3.31 m
- Stabiliser spread, operating (outside)
- 3.77 m
- Rear frame width
- 2.322 m
Backhoe performance
- Max dig depth
- 4.612 mSAE maximum, standard stick
- Max dig depth (E-stick extended)
- 5.862 mSAE maximum, extendible stick extended
- Digging depth, 2440 mm flat bottom
- 4.262 m
- Digging depth, 610 mm flat bottom
- 4.587 m
- Reach at ground level, from slew centre
- 6.032 m
- Reach at ground level, from slew centre (E-stick extended)
- 7.217 m
- Reach from rear axle centreline at ground line
- 7.122 m
- Max load-over height
- 4.027 mLoading height, standard stick
- Loading reach
- 1.859 m
- Maximum operating height (backhoe)
- 6.081 m
- Bucket tearout force
- 72 kN
- Dipper tearout force
- 45 kN
- Swing arc
- 180°
- Bucket rotation
- 205°
Loader performance
- Shovel capacity
- 0.96 m³GP bucket, SAE rated, pin-on
- Lift capacity to full height
- 3,280 kg
- Shovel breakout force
- 50 kN
- Lift breakout force
- 50 kN
- Tipping load at breakout point
- 7,081 kg
- Dump height
- 2.758 m
- Maximum hinge pin height
- 3.488 m
- Dump angle at full height
- 44°
- Dump reach at maximum angle
- 0.807 m
- Maximum bucket rollback at ground level
- 36°
- Loader digging depth
- 0.07 m
- Grille to bucket cutting edge, carry position
- 1.48 m
- Maximum operating height (loader)
- 4.356 m
Weight
- Operating weight
- 8,188 kg
- Operating weight (maximum, ROPS capacity)
- 11,000 kg
- Operating weight (minimum)
- 7,525 kg
Engine
- Engine model
- Cat C3.6, electronic turbo, intercooled86 kW (115 hp) rating
- Emissions
- U.S. EPA Tier 4 Final / EU Stage V
- Displacement
- 3.6 L
- Bore
- 98 mm
- Stroke
- 120 mm
- Gross power
- 88 kW (118 hp)SAE J1995 at 2,200 rpm
- Gross power (ISO 14396)
- 86 kW (115 hp)At 2,200 rpm
- Net power
- 80 kW (107 hp)
- Max torque
- 486 NmNet, SAE J1349; 41% torque rise at 1,400 rpm
Transmission
- Transmission
- Power shift 4F/3R (standard); 6F/3R power shift optional, with or without LTC
- Top speed
- 41 km/h
Hydraulics
- Hydraulic system
- Closed center; variable-flow axial piston pump
- Pump flow
- 187 L/minAt 2,200 rpm
- Max pressure
- 250 bar
Tyres
- Front tyres
- 340/80-18
- Rear tyres
- 500/70-24
Source: Cat 430 Backhoe Loader spec sheet AEHQ8245-03 (North America)
Cat 430 service
What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 9 L
- Engine oil and filter, change every
- 500 hours
Fluid: Cat DEO-ULS SAE 15W-40 (Cat's grade for -10 to 50 °C) (Cat fluid selector: 430 (S/N H8W00001-Up))
The C3.6 holds only about 9 L, so a missed check or a late change on a hot day costs it quickly; the dipstick and filler are under the top engine door.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 160 L42.3 gal
- Engine oil, with filter
- 9 L2.4 gal
- Cooling system
- 18 L4.8 gal
- Diesel exhaust fluid (DEF)
- 19 L5.0 gal
- Hydraulic system, with tank
- 95 L25.1 gal
- Hydraulic tank
- 42 L11.1 gal
- Transmission, power shuttle (AWD)
- 18 L4.8 gal
- Transmission, power shift (AWD)
- 19 L5.0 gal
- Rear axle
- 16 L4.2 gal
- Front axle (AWD)
- 11 L2.9 gal
- Final drive, front (each)
- 0.7 L0.2 US gal
- Final drive, rear (each)
- 1.7 L0.4 US gal
Service intervals
- Engine oil and filter
- 500 hours
- Transmission oil
- 1,000 hours
- Axle oil
- 1,000 hours
- Hydraulic oil
- 3,000 hours
- Coolant
- 12,000 hours
Compare the Cat 430
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Cat 430
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 7.3m
- Width
- 2.25m
- Height
- 3.85m
- Weight
- 8.2t
- RoadA beavertail or flatbed truck
- SeaA 40 ft flat rack, out of gauge (over-height): expect a surcharge
Cat 430 prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 9
AED 750 /day
No priced Cat 430 for hire yet: this is all backhoe loaders
No Cat 430 for rent listed right now.
Request a Cat 430About the Cat 430
The Cat 430 is a 8.19-tonne backhoe loader with a Cat C3.6 engine rated at 80 kW (107 hp).
It digs to 4.612 m with the backhoe, carries 0.96 m³ in the front shovel, dumps at 2.758 m and travels at up to 41 km/h between sites.
For transport it measures 7.304 m long and 2.248 m wide, and its tank holds 160 L of fuel.
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites.
Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
Cat 430 questions
How much does a Cat 430 weigh?
8,188 kg (18,051 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Cat 430 have?
A Cat C3.6 engine rated at 80 kW (107 hp) net.
How deep can a Cat 430 dig?
Up to 4.612 m (15'2") with the backhoe.
How much does the Cat 430's front shovel hold?
0.96 m³ (1.26 yd³).
What are the Cat 430's dimensions?
7.30 m long, 2.25 m wide and 3.85 m high, from Cat's dimension drawing.
How do you transport a Cat 430?
Road: a beavertail or flatbed truck. Sea: a 40 ft flat rack, out of gauge (over-height): expect a surcharge.
What is the Cat 430's fuel tank capacity?
160 L (42.3 gal).
How much oil does a Cat 430 take?
Engine oil: 9 L (2.4 gal). Hydraulic oil: Closed center; variable-flow axial piston pump.
How often does a Cat 430 need an oil change?
Cat sets the engine oil and filter at every 500 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the Cat 430's main competitors?
The machines nearest it in size are the Case 580SN, the Cat 432, the John Deere 410 P-Tier. Each has a side-by-side comparison on EquipmentsFinder.
Is the Cat 430 sold in the UAE?
Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.
What is a Cat 430 used for?
A backhoe loader: a loader bucket at the front and a digging arm at the back, on one wheeled machine that drives between sites. Typical jobs: trenching for pipes and cables, loading trucks and moving material, site clearing and levelling, road and utility repair.
Need a Cat 430 on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
