Cat 325 specs
- digging depth
- 6.7 m
- net power
- 128.5 kW (172 hp)
- operating weight
- 26,400 kg
- bucket capacity
- 1.19 m³
Cat 325 dimensions
| Letter | Dimension | Metric and imperial |
|---|---|---|
| 1 | Overall height (to top of cab) | 3.08 m10'1" |
| 2 | Overall length | 8.89 m29'2" |
| 3 | Upperframe width | 2.99 m9'10" |
| 4 | Tail swing radius | 1.81 m5'11" |
| 5 | Ground clearance, counterweight | 1.02 m3'4" |
| 6 | Ground clearance (minimum) | 0.44 m1'4" |
| 7 | Track length on ground | 3.65 m12'0" |
| 8 | Track length | 4.46 m14'7" |
| 9 | Track gauge | 2.38 m7'10" |
| 10 | Overall width | 2.98 m9'9" |
Cat 325 specifications
Cat 325 (next generation, build 07H) Tier 3 / Stage IIIA-equivalent build with the Cat C4.4 engine, per Cat Technical Specifications AEXQ4237-00 (10-2025) for the Australia-New Zealand market; long undercarriage, 5.7 m Reach/HD Reach boom, R2.9B1 stick, HD 1.19 m³ bucket. Al-Bahar (UAE) does not list a 325, so no Gulf sheet exists.
38 figures in 5 groups
Dimensions
- Handrail height
- 3.19 m
- Shipping height (without OPG)
- 3.21 m
- Overall height (to top of boom)
- 3.2 m
- Shoe width
- 0.6 m
Performance
- Max digging depth
- 6.7 m
- Max reach at ground level
- 9.78 m
- Max digging height
- 10.97 m
- Max dumping height
- 7.9 m
- Min loading height
- 2.98 m
- Max depth cut for 2,440 mm level bottom
- 6.52 m
- Max vertical wall digging depth
- 4.88 m
- Min front swing radius
- 2.28 m
- Bucket capacity
- 1.19 m³HD bucket
- Bucket digging force
- 150 kNISO; 163 kN with Auto Dig Boost
- Arm digging force
- 106 kN
- Swing speed
- 11.12 rpm
- Max swing torque
- 82 kN·m
- Travel speed (high)
- 5.7 km/hmaximum travel speed
- Max drawbar pull
- 201 kN
- Gradeability
- 35°/70%
Weight
- Operating weight
- 26,400 kg
- Operating weight (8,300 kg counterweight)
- 27,600 kg
Engine
- Engine model
- Cat C4.4
- Emissions
- Emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA
- Net power
- 128.5 kW (172 hp)ISO 9249, at 2,200 rpm
- Net power (DIN)
- 175 hp (metric)ISO 9249 (DIN)
- Gross power
- 129.4 kW (174 hp)ISO 14396
- Gross power (DIN)
- 176 hp (metric)ISO 14396 (DIN)
- Bore
- 105 mm
- Stroke
- 127 mm
- Displacement
- 4.4 L
- Biodiesel capability
- Up to B20
Hydraulics
- Pump flow
- 429 L/min
- Max pressure
- 35 000 kPaequipment, normal
- Max pressure, equipment (heavy lift / Auto Dig Boost)
- 38 000 kPa
- Max pressure, travel
- 35 000 kPa
- Max pressure, swing
- 27 500 kPa
- Auxiliary pump flow (optional)
- 51 L/minat 14 000 kPa max
Cat 325 service
What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.
Loading the 3D machine...
Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is
- Engine oil, with filter
- 15 L
- Engine oil and filter, change every
- 500 hours
Fluid: Cat DEO-ULS SAE 15W-40 (Cat grade for -10 to 50 °C) (Cat 325 Excavator Operation and Maintenance Manual M0099648-02)
Filter and ground-level dipstick are behind the right side access door; filler and upper dipstick under the engine service door on top.
Oil carries soot and heat out of the C4.4; dust and summer heat age it fast, so change it on the hour, not late.
Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.
Service capacities
- Fuel tank
- 313 L82.7 gal
- Cooling system
- 24 L6.3 gal
- Engine oil, with filter
- 15 L4.0 gal
- Swing drive
- 5.5 L1.5 gal
- Final drive (each)
- 4.5 L1.2 gal
- Hydraulic system, with tank
- 230 L60.8 gal
- Hydraulic tank
- 111 L29.3 gal
Service intervals
- Engine oil and filter
- 500 hours
- Fuel filters
- 1,000 hours
- Swing drive oil
- 1,000 hours
- Final drive oil
- 2,000 hours
- Hydraulic return filter
- 3,000 hours
- Hydraulic oil
- 6,000 hours
- Coolant
- 12,000 hours
- Boom and stick linkage grease
- 500 hours
- Bucket linkage grease
- 100 hours
Compare the Cat 325
The machines nearest in size, each drawn beside this one at the same scale.
Moving a Cat 325
A first look from the sheet. Your haulier or forwarder confirms the load.
- Length
- 8.89m
- Width
- 2.98m
- Height
- 3.08m
- Weight
- 26.4t
- RoadA 3 or 4-axle lowbed
- Width2.98 m wide: over 2.6 m usually needs an oversize permit and escort
- SeaA 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge
Cat 325 prices and listings in the UAE
Asking prices on EquipmentsFinder, in AED, refreshed daily.
Typical hire, per daymedian of 26
AED 1,200 /day
No priced Cat 325 for hire yet: this is all excavators
About the Cat 325
The Cat 325 is a 26.4-tonne excavator with a Cat C4.4 engine rated at 128.5 kW (172 hp).
It digs to 6.7 m, reaches 9.78 m, dumps at up to 7.9 m and works a 1.19 m³ bucket.
For transport it measures 8.89 m long and 2.98 m wide, and its tank holds 313 L of fuel.
A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability.
Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.
Cat 325 questions
How much does a Cat 325 weigh?
26,400 kg (58,200 lb) in working order, with fuel, operator and standard attachment.
What engine and horsepower does the Cat 325 have?
A Cat C4.4 engine rated at 128.5 kW (172 hp) net.
How deep can a Cat 325 dig?
The Cat 325 digs to 6.7 m (22'0") with the standard boom and arm.
What is the Cat 325's maximum reach?
Its reach at ground level is 9.78 m (32'1").
What size bucket does the Cat 325 take?
1.19 m³ (1.56 yd³) is the bucket the maker quotes its figures with; other sizes fit.
What are the Cat 325's dimensions?
8.89 m long, 2.98 m wide and 3.08 m high, from Cat's dimension drawing.
How do you transport a Cat 325?
Road: a 3 or 4-axle lowbed. Width: 2.98 m wide: over 2.6 m usually needs an oversize permit and escort. Sea: a 40 ft flat rack, out of gauge (over-width, over-height): expect a surcharge.
What is the Cat 325's fuel tank capacity?
313 L (82.7 gal).
How much oil does a Cat 325 take?
Engine oil: 15 L (4.0 gal). Hydraulic oil: 230 L (60.8 gal).
How often does a Cat 325 need an oil change?
Cat sets the engine oil and filter at every 500 hours; in hot, dusty work, check the operator's manual for a shorter interval.
What are the Cat 325's main competitors?
The machines nearest it in size are the Cat 323, the Hyundai HX210AL, the Cat 330. Each has a side-by-side comparison on EquipmentsFinder.
Is the Cat 325 sold in the UAE?
Not new through a Gulf dealer: it is sold in the USA and other markets worldwide. Used and imported machines do come up on EquipmentsFinder.
What is a Cat 325 used for?
A crawler excavator: a digging arm and bucket on a cab that turns all the way round, on tracks for grip and stability. Typical jobs: digging foundations and trenches, loading dump trucks, demolition with a breaker, lifting pipes into trenches.
Need a Cat 325 on site?
Post the job - where, when and for how long. Suppliers with a machine contact you directly. Free to post.
