EquipmentsFinder
Need equipment? Have equipment?
Buyers post one request and get quotes from verified suppliers. Suppliers list free and reach active demand.
Need equipment? Have equipment?
Buyers post one request and get quotes from verified suppliers. Suppliers list free and reach active demand.
No milling machines are listed for rent in India today. The India site has only just re-opened and stock has not arrived. Suppliers can list a machine for free, and road contractors can post a request.
Milling machines, also called cold planers, grind off the worn surface of a road so that fresh asphalt can be laid. The usual hirers are road and highway contractors, municipal works contractors and airport or industrial yard operators. Suppliers list their own machines on EquipmentsFinder, and renters speak to them by phone or WhatsApp. Renters pay the platform nothing and no commission is taken.
Width decides how many passes a lane needs, and depth is set by how much of the old layer is being removed. A wide machine finishes a long stretch faster, but needs room to turn and trucks alongside to take the milled material. Ask the supplier about the drum and teeth fitted, and who supplies replacement teeth, as wear is a real cost on abrasive surfaces.
Full-lane milling suits a complete resurfacing, where the whole lane is lowered by a set depth and re-paved. Patch milling removes only failed sections such as potholes and rutted areas. It needs a smaller machine and a quicker set-up. Night work on busy roads is common, so confirm when the machine and crew can be on site.
No rates are shown because nothing is listed. Suppliers price in INR, and a quote depends on the machine, the area to be milled, operator, teeth, water and transport. Ask whether GST applies.
Milling machines move on low-bed trailers, which makes supply across cities workable. Listings will be reachable from the pages for Delhi NCR, Mumbai, Kolkata, Bengaluru, Chennai and Hyderabad. To buy, see milling machines for sale.
Give the road length and width, milling depth, location, dates and whether you need an operator, in a request. Open requests are on the inquiry board, and more categories on the rent hub.
No machines are listed yet, so no rate can be quoted. Suppliers set INR rates based on the machine, area, operator, teeth and transport. A request brings quotes to compare.
Match the milling width to the lane or area, the depth to the layer being removed, and the size to the access. A compact machine suits a city street, and a large one suits a highway.
That varies by supplier. It is stated on the listing or confirmed when you contact the supplier. Operators need a valid licence for the machine class.
It depends on the supplier. Moving a milling machine is a large part of the cost, so a longer job tends to suit it better. Ask for the minimum period.
Requirements depend on the machine, the road and the authority that owns it. Ask the supplier what papers the machine carries, and ask the road owner what they need for working hours and traffic control.
Use the Post an Ad page. Listing is free, and renters reach you through the phone and WhatsApp details on the listing.