Specification sheetIssued 20 November 2026
Zoomlion · mobile crane
Zoomlion ZTC800V532
Zoomlion ZTC800V532 80 t truck crane (4 axles, 5-section 12.1-47 m boom, left-hand drive) per Zoomlion's ZTC800V532 brochure (file ZTC800V532_spec_mt_en_v2017), Cranepedia download. The sheet gives no engine, tyre or tank data. The drawing numbers on the page are ours; the maker's drawing carries no letters. Variants with other codes (V552, V552.1T, V653) and the right-hand-drive ZTC800R532 are not covered.
UAEGlobal
- lifting capacity
- 176,370 lb
- Main boom length (m, fully extended)
- 154 ft 2 in
- tip height
- 156 ft 6 in
12.6 ft47.6 ft
9.2 ftDimensions
- Approach angle
- 20°
- Departure angle
- 15°
- Tail slewing radius
- 13 ft 9 in
- Outrigger span, longitudinal
- 19 ft 10 in
- Outrigger span, transverse (max) (Fully extended)
- 25 ft 7 in
- Turning diameter (min)
- 24 m or less
- Carrier length (Estimate: front overhang 2.692 m + axle spacings 1.45 / 4.5 / 1.35 m + rear overhang 2.092 m (front bumper to rear of frame))
- 39.6 ftest.
Weight
- Gross vehicle weight (Printed as 'deadweight in driving condition')
- 101,413 lb
- Kerb weight (Printed as 'complete vehicle kerb mass')
- 100,983 lb
- Axle load, front / rear
- 20,000 kg / 26,000 kg
- Counterweight (Counterweight of the load tables)
- 11,023 lb
Crane
- Max lifting capacity (At 3 m radius with the 80 t hook)
- 176,370 lb
- Main boom length (m, fully extended)
- 154 ft 2 in
- Main boom length retracted (m)
- 39 ft 8 in
- Boom sections
- 5, U-shaped
- Max tip height (Fully extended main boom; excludes deflection of boom and jib)
- 156 ft 6 in
- Max tip height with jib
- 209 ft 4 in
- Jib
- Two-section lattice jib, 9.5 m / 16 m, offsets 0 / 15 / 30 deg
- Max load moment, basic boom
- 2,646 kN.m
- Max load moment, fully extended boom
- 1,288 kN.m
- Rated capacity, 12.1 m boom at 5 m radius (5 t counterweight, outriggers fully extended, over sides and rear, 60 t hook)
- 110,231 lb
- Rated capacity, 12.1 m boom at 7 m radius (Same chart)
- 72,752 lb
- Rated capacity, 47 m boom at 10 m radius (Same chart)
- 25,353 lb
- Rated capacity, 47 m boom at 20 m radius (Same chart)
- 11,244 lb
- Rated capacity, 47 m boom at 34 m radius (Same chart)
- 2,205 lb
- Boom elevation angle
- -2 to 80 deg
- Boom raising time
- 55 s
- Boom extension time
- 120 s
- Main winch single-line speed
- 0-125 m/min (4th layer)
- Auxiliary winch single-line speed
- 0-110 m/min (2nd layer)
- Slewing speed (Load-sensing slewing, minimum stable slewing speed 0.1 deg/s; minimum stable hoisting speed 2.5 m/min)
- 0-1.7 rpm
- Fuel consumption, crane working
- Average below 4.5 L/h with the multi-power energy-saving mode
Chassis
- Number of axles
- 4 (axle spacing 1.45 / 4.5 / 1.35 m on the drawing)
- Top speed
- 52.8 mph
- Gradeability (max)
- 46 %
- Fuel consumption per 100 km
- 12 US gal