Zoomlion ZTC800V532
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Zoomlion · mobile crane

Zoomlion ZTC800V532

Zoomlion ZTC800V532 80 t truck crane (4 axles, 5-section 12.1-47 m boom, left-hand drive) per Zoomlion's ZTC800V532 brochure (file ZTC800V532_spec_mt_en_v2017), Cranepedia download. The sheet gives no engine, tyre or tank data. The drawing numbers on the page are ours; the maker's drawing carries no letters. Variants with other codes (V552, V552.1T, V653) and the right-hand-drive ZTC800R532 are not covered.

UAEGlobal

lifting capacity
80 t
Main boom length (m, fully extended)
47 m
tip height
47.7 m
Zoomlion ZTC800V532, side view with dimensions (illustration)3.85 m14.5 m
Zoomlion ZTC800V532, front view (illustration)2.8 m

Dimensions

Approach angle
20°
Departure angle
15°
Tail slewing radius
4.2 m
Outrigger span, longitudinal
6.05 m
Outrigger span, transverse (max) (Fully extended)
7.8 m
Turning diameter (min)
24 m or less
Carrier length (Estimate: front overhang 2.692 m + axle spacings 1.45 / 4.5 / 1.35 m + rear overhang 2.092 m (front bumper to rear of frame))
12.084 mest.

Weight

Gross vehicle weight (Printed as 'deadweight in driving condition')
46,000 kg
Kerb weight (Printed as 'complete vehicle kerb mass')
45,805 kg
Axle load, front / rear
20,000 kg / 26,000 kg
Counterweight (Counterweight of the load tables)
5 t

Crane

Max lifting capacity (At 3 m radius with the 80 t hook)
80 t
Main boom length (m, fully extended)
47 m
Main boom length retracted (m)
12.1 m
Boom sections
5, U-shaped
Max tip height (Fully extended main boom; excludes deflection of boom and jib)
47.7 m
Max tip height with jib
63.8 m
Jib
Two-section lattice jib, 9.5 m / 16 m, offsets 0 / 15 / 30 deg
Max load moment, basic boom
2,646 kN.m
Max load moment, fully extended boom
1,288 kN.m
Rated capacity, 12.1 m boom at 5 m radius (5 t counterweight, outriggers fully extended, over sides and rear, 60 t hook)
50 t
Rated capacity, 12.1 m boom at 7 m radius (Same chart)
33 t
Rated capacity, 47 m boom at 10 m radius (Same chart)
11.5 t
Rated capacity, 47 m boom at 20 m radius (Same chart)
5.1 t
Rated capacity, 47 m boom at 34 m radius (Same chart)
1 t
Boom elevation angle
-2 to 80 deg
Boom raising time
55 s
Boom extension time
120 s
Main winch single-line speed
0-125 m/min (4th layer)
Auxiliary winch single-line speed
0-110 m/min (2nd layer)
Slewing speed (Load-sensing slewing, minimum stable slewing speed 0.1 deg/s; minimum stable hoisting speed 2.5 m/min)
0-1.7 rpm
Fuel consumption, crane working
Average below 4.5 L/h with the multi-power energy-saving mode

Chassis

Number of axles
4 (axle spacing 1.45 / 4.5 / 1.35 m on the drawing)
Top speed
85 km/h
Gradeability (max)
46 %
Fuel consumption per 100 km
45 L