Specification sheetIssued 20 November 2026
Zoomlion · mobile crane
Zoomlion ZTC251V452
Zoomlion ZTC251V452 (ZLJ5300JQZ25E) 25 t truck crane, the current 4-section 10.7-35 m model in the ZTC250 class (6x4 chassis, Weichai WP7.270E51 China V engine) per Zoomlion's technical specification ZTC251V452/27Y, Cranepedia-hosted copy. The drawing numbers on the page are ours; the maker's drawing carries no letters.
UAEGlobal
- lifting capacity
- 55,116 lb
- Main boom length (m, fully extended)
- 114 ft 10 in
- tip height
- 116 ft 2 in
- power
- 267 hp
11.4 ft41.5 ft
8.2 ftDimensions
- Overall length per drawing (Total printed on the drawing; the table gives 12.64 m)
- 43 ft 0 in
- Tail slewing radius
- 10 ft 9 in
- Outrigger span, longitudinal
- 17 ft 7 in
- Outrigger span, transverse (max) (4.25 m with outriggers intermediately extended)
- 20 ft 4 in
- Turning diameter (min)
- 20 m or less
- Carrier length (Estimate: front overhang 2.58 m + axle spacings 4.225 / 1.35 m + rear overhang 2.717 m (front bumper to rear of frame))
- 35.7 ftest.
Weight
- Gross vehicle weight (Deadweight in driving condition; kerb mass 29,470 kg)
- 65,257 lb
- Axle load, front / rear
- 6,600 kg / 23,000 kg (two rear axles)
Crane
- Max lifting capacity (At 3 m radius (minimum rated radius))
- 55,116 lb
- Main boom length (m, fully extended)
- 114 ft 10 in
- Main boom length retracted (m)
- 35 ft 1 in
- Boom sections
- 4, box-type U-shaped, one telescoping cylinder with synchronous mechanism
- Max tip height (Fully extended main boom)
- 116 ft 2 in
- Max tip height with jib
- 141 ft 1 in
- Jib
- 8 m single-section lattice jib, offsets 0 / 15 / 30 deg
- Max load moment, basic boom
- 960 kN.m
- Max load moment, fully extended boom
- 672 kN.m
- Rated capacity, 10.7 m boom at 8 m radius (Outriggers fully extended, over sides and rear, 25 t hook with 8 parts of line)
- 24,251 lb
- Rated capacity, 35 m boom at 8 m radius (Same table)
- 16,755 lb
- Rated capacity, 35 m boom at 30 m radius (Same table)
- 2,205 lb
- Rated capacity, 35 m boom with jib at 80 deg (3 t hook, jib at 0 deg offset, outriggers fully extended)
- 6,614 lb
- Boom elevation angle
- -1 to 80 deg
- Boom raising time
- 25 s
- Boom extension time
- 64 s
- Main winch single-line speed
- 0-120 m/min (4th layer)
- Auxiliary winch single-line speed
- 0-120 m/min (4th layer)
- Main winch rope
- 17 mm x 160 m, grade 1870 N/mm2
- Auxiliary winch rope
- 17 mm x 95 m, grade 1870 N/mm2
- Slewing speed
- 0-2.7 rpm, 360 deg continuous
- Hooks
- 25 t main hook with 4 sheaves; 4 t auxiliary hook (1 part of line)
- Hydraulic system
- Open circuit, quadruple gear pump, pilot proportional control; 5th outrigger under the cab
- Max wind speed for operation
- 14.1 m/s (3 s gust)
- Operating temperature range
- -20 to +40 deg C, altitude up to 2,000 m
Chassis
- Number of axles (Zoomlion special-purpose chassis ZLJ5310JQZV5)
- 3 (6x4)
- Engine model
- Weichai WP7.270E51, China V (GB 3847-2018)
- Gross power (At 2,100 rpm)
- 267 hp
- Max torque (At 1,200-1,700 rpm)
- 856 lbf·ft
- Top speed
- 49.7 mph
- Gradeability (max)
- 40 %
- Fuel consumption per 100 km
- 7 US gal
- Electrical system
- 24 V DC, two-wire system