Specification sheetIssued 4 November 2026
XCMG · mini excavator
XCMG XE45U Pro
XCMG XE45U (Kubota D1803 T4F) from XCMG North America's own XE45U brochure v4.11-2025-01; letters A-R are from the drawing on its p.2. No XE45U Pro-specific sheet was found on xcmg-usa.com: Equipment World's Pro launch story prints the same weight, dig depth, dump height and bucket force, but XCMG's launch release calls the Pro's undercarriage reinforced and widened, so widths and lifting figures may differ.
USAGlobal
- digging depth
- 10.96 ft
- power
- 39.8 hp
- Operating weight
- 10,582 lb
- Bucket capacity
- 0.14 yd3
- Overall length
- 17.22 ft
- Overall width
- 6.07 ft
- Overall height
- 8.32 ft
- Track length
- 7.38 ft
- Undercarriage width
- 6.07 ft
- Shoe width
- 1.15 ft
- Track length on ground
- 5.91 ft
- Track gauge
- 4.92 ft
- Ground clearance (minimum)
- 0.95 ft
- Tail swing radius
- 3.99 ft
I
J
K
L
M
N
O
P
Q
R
Performance
- AMax digging height
- 17.98 ft
- BMax dumping height
- 13.29 ft
- CMax digging depth
- 10.96 ft
- DMax vertical wall digging depth
- 8.79 ft
- EMax digging reach
- 18.75 ft
- FMin swing radius
- 7.48 ft
- GMax dozer lifting height
- 1.37 ft
- HMax dozer cutting depth
- 1.68 ft
- Bucket capacity (Standard bucket)
- 0.14 yd3
- Bucket digging force (ISO)
- 8,588 lbf
- Arm digging force (ISO)
- 4,946 lbf
- Top speed (High range; low range 2.6 km/h)
- 3.1 mph
- Traction force
- 9,442 lbf
- Gradeability
- 30 deg / 58%
Weight
- Operating weight
- 10,582 lb
Engine
- Engine model
- Kubota D1803, T4F, water-cooled 3-cylinder
- Net power (SAE J1349 at 2,200 rpm)
- 39.8 hp
- Max torque (at 1,500 rpm)
- 111 ft-lb
- Fuel tank
- 17.17 gal
Hydraulics
- Pump flow (Total hydraulic capacity)
- 34.9 gal/min
- Auxiliary flow (AUX maximum flow rate)
- 24 gal/min
- Max pressure (Main system)
- 3,481 psi
- Hydraulic tank
- 9.5 gal