Specification sheetIssued 20 November 2026
XCMG · mobile crane
XCMG XCT80
XCMG XCT80_S 80 t truck crane (4 axles 8x4, 5-section 12.4-48 m boom, D10.38-50 engine, 15 t maximum counterweight) per XCMG's XCT80_S technical specifications, Techno-XCMG (Russia) dealer-hosted copy of the maker's bilingual sheet. The drawing numbers on the page are ours; the maker's drawing letters are given in the notes. The earlier XCT80_Y (45.5 m boom) and XCT80L variants are not covered.
UAEGlobal
- lifting capacity
- 176,370 lb
- Main boom length (m, fully extended)
- 157 ft 6 in
- tip height
- 157 ft 6 in
- power
- 367 hp
12.8 ft47.7 ft
9 ftDimensions
- Approach angle (Maker's drawing letter A)
- 16°
- Departure angle (Maker's drawing letter B)
- 12°
- Track, axles 1-2 / 3-4
- 2.316 / 2.063 m
- Tail slewing radius (At the counterweight; 4.545 m at the auxiliary winch)
- 14 ft 3 in
- Outrigger span, longitudinal
- 27 ft 9 in
- Outrigger span, transverse (max) (5.6 m at the intermediate beam position)
- 25 ft 11 in
- Turning radius (vehicle, min) (Maker's drawing letter R3; the table gives a minimum turning diameter of 24 m or less)
- 39 ft 4 in
- Turning radius at boom tip (min) (Maker's drawing letter R1; the table gives a boom-tip turning diameter of 29.9 m or less)
- 49 ft 1 in
- Carrier length (Estimate: front overhang 3.14 m + axle spacings 1.47 / 3.95 / 1.35 m + rear overhang 2.88 m (front bumper to rear of frame))
- 42 ftest.
Weight
- Gross vehicle weight (Maximum permitted mass in the drawn travel configuration with the 5 boom sections, main winch, 55 t hook block and 1.5 t counterweight; the sheet also lists 46 t (jib and auxiliary winch carried) and 48 t (6 t counterweight carried))
- 94,799 lb
- Axle load, axles 1 / 2 / 3 / 4
- 9.5 / 9.5 / 12 / 12 t (43 t); 10 / 10 / 13 / 13 t (46 t); 8.3 / 8.3 / 15.7 / 15.7 t (48 t)
- Counterweight (Maximum; blocks of 1.5 t and 3 x 4.5 t give working modes of 1.5 / 6 / 10.5 / 15 t)
- 33,069 lb
Crane
- Max lifting capacity (At 3 m minimum rated radius)
- 176,370 lb
- Main boom length (m, fully extended)
- 157 ft 6 in
- Main boom length retracted (m)
- 40 ft 8 in
- Main boom + jib length (With the 17.5 m jib)
- 244 ft 5 in
- Boom sections
- 5, U-shaped, welded, two telescoping cylinders plus ropes
- Max tip height (Fully extended main boom)
- 157 ft 6 in
- Max tip height with jib
- 242 ft 9 in
- Jib
- Two-section lattice jib, 10.5 m / 17.5 m, offsets 0 / 15 / 30 deg; optional 9 m boom extension
- Single top (Maximum load on the boom single top)
- 14,330 lb
- Max load moment, basic boom
- 3,175 kN.m
- Max load moment, fully extended boom
- 1,615 kN.m
- Max load moment, boom + jib
- 1,011 kN.m
- Rated capacity, 12.4 m boom at 7 m radius (15 t counterweight, outriggers fully extended (8.45 x 7.9 m), 80 t hook)
- 99,208 lb
- Rated capacity, 12.4 m boom at 10 m radius (Same chart)
- 58,863 lb
- Rated capacity, 48 m boom at 16 m radius (Same chart)
- 22,708 lb
- Rated capacity, 48 m boom at 30 m radius (Same chart)
- 8,818 lb
- Rated capacity, 48 m boom with 17.5 m jib at 80 deg (Jib at 0 deg offset; 10.5 m jib 6.5 t; 17.5 m jib at 30 deg offset 1.8 t)
- 8,818 lb
- Boom elevation angle
- -2 to 81 deg
- Boom raising time
- Approx. 55 s from -2 to 81 deg
- Boom extension time
- Approx. 110 s from 12.4 m to 48 m
- Main winch single-line speed
- 0-145 m/min (4th layer)
- Auxiliary winch single-line speed
- 0-90 m/min (4th layer)
- Max single line pull (Main winch 64.1 kN; auxiliary winch 63.7 kN)
- 14,330 lb
- Main winch rope
- 20 mm x 240 m
- Auxiliary winch rope
- 20 mm x 180 m
- Slewing speed
- 0-2 rpm, 360 deg continuous
- Hook block weight (80 t single hook, 12 parts of line (1,735 x 554 x 520 mm), standard; 55 t block 470 kg (8 parts), optional; 7 t block 210 kg (1 part), standard)
- 1,543 lb
- Outrigger extend / retract time
- Beams out 25 s / in 20 s; jacks out 40 s / in 30 s (maximum)
- Hydraulic tank
- 264 US gal
Chassis
- Number of axles
- 4 (8x4)
- Engine model
- D10.38-50
- Gross power (Rated, at 2,000 rpm)
- 370 hp
- Net power (Maximum net, at 2,000 rpm)
- 367 hp
- Max torque (At 1,200-1,500 rpm)
- 1,151 lbf·ft
- Tyres
- 12.00R24-20PR
- Top speed (Minimum; minimum stable speed 2.5-3 km/h)
- 49.7 mph
- Gradeability (max)
- 45 % or more
- Fuel consumption per 100 km
- 11 US gal
- Braking distance from 30 km/h
- 10 m or less
- Transmission
- Fast mechanical (manual) gearbox, 10 forward / 2 reverse
- Suspension
- Steel springs front, rubber suspension rear
- Brakes
- Dual-circuit air service brake on all wheels; spring-energy parking brake on axles 2, 3 and 4; engine retarder auxiliary brake
- Steering
- Axles 1 and 2 steered; mechanical steering with hydraulic assist
- Electrical system
- 24 V DC, 2 batteries in series; 24 V 80 A generator