XCMG XCT80
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

XCMG · mobile crane

XCMG XCT80

XCMG XCT80_S 80 t truck crane (4 axles 8x4, 5-section 12.4-48 m boom, D10.38-50 engine, 15 t maximum counterweight) per XCMG's XCT80_S technical specifications, Techno-XCMG (Russia) dealer-hosted copy of the maker's bilingual sheet. The drawing numbers on the page are ours; the maker's drawing letters are given in the notes. The earlier XCT80_Y (45.5 m boom) and XCT80L variants are not covered.

UAEGlobal

lifting capacity
80 t
Main boom length (m, fully extended)
48 m
tip height
48 m
power
274 kW (367 hp)
XCMG XCT80, side view with dimensions (illustration)3.91 m14.5 m
XCMG XCT80, front view (illustration)2.75 m

Dimensions

Approach angle (Maker's drawing letter A)
16°
Departure angle (Maker's drawing letter B)
12°
Track, axles 1-2 / 3-4
2.316 / 2.063 m
Tail slewing radius (At the counterweight; 4.545 m at the auxiliary winch)
4.35 m
Outrigger span, longitudinal
8.45 m
Outrigger span, transverse (max) (5.6 m at the intermediate beam position)
7.9 m
Turning radius (vehicle, min) (Maker's drawing letter R3; the table gives a minimum turning diameter of 24 m or less)
12 m
Turning radius at boom tip (min) (Maker's drawing letter R1; the table gives a boom-tip turning diameter of 29.9 m or less)
14.95 m
Carrier length (Estimate: front overhang 3.14 m + axle spacings 1.47 / 3.95 / 1.35 m + rear overhang 2.88 m (front bumper to rear of frame))
12.79 mest.

Weight

Gross vehicle weight (Maximum permitted mass in the drawn travel configuration with the 5 boom sections, main winch, 55 t hook block and 1.5 t counterweight; the sheet also lists 46 t (jib and auxiliary winch carried) and 48 t (6 t counterweight carried))
43,000 kg
Axle load, axles 1 / 2 / 3 / 4
9.5 / 9.5 / 12 / 12 t (43 t); 10 / 10 / 13 / 13 t (46 t); 8.3 / 8.3 / 15.7 / 15.7 t (48 t)
Counterweight (Maximum; blocks of 1.5 t and 3 x 4.5 t give working modes of 1.5 / 6 / 10.5 / 15 t)
15 t

Crane

Max lifting capacity (At 3 m minimum rated radius)
80 t
Main boom length (m, fully extended)
48 m
Main boom length retracted (m)
12.4 m
Main boom + jib length (With the 17.5 m jib)
74.5 m
Boom sections
5, U-shaped, welded, two telescoping cylinders plus ropes
Max tip height (Fully extended main boom)
48 m
Max tip height with jib
74 m
Jib
Two-section lattice jib, 10.5 m / 17.5 m, offsets 0 / 15 / 30 deg; optional 9 m boom extension
Single top (Maximum load on the boom single top)
6.5 t
Max load moment, basic boom
3,175 kN.m
Max load moment, fully extended boom
1,615 kN.m
Max load moment, boom + jib
1,011 kN.m
Rated capacity, 12.4 m boom at 7 m radius (15 t counterweight, outriggers fully extended (8.45 x 7.9 m), 80 t hook)
45 t
Rated capacity, 12.4 m boom at 10 m radius (Same chart)
26.7 t
Rated capacity, 48 m boom at 16 m radius (Same chart)
10.3 t
Rated capacity, 48 m boom at 30 m radius (Same chart)
4 t
Rated capacity, 48 m boom with 17.5 m jib at 80 deg (Jib at 0 deg offset; 10.5 m jib 6.5 t; 17.5 m jib at 30 deg offset 1.8 t)
4 t
Boom elevation angle
-2 to 81 deg
Boom raising time
Approx. 55 s from -2 to 81 deg
Boom extension time
Approx. 110 s from 12.4 m to 48 m
Main winch single-line speed
0-145 m/min (4th layer)
Auxiliary winch single-line speed
0-90 m/min (4th layer)
Max single line pull (Main winch 64.1 kN; auxiliary winch 63.7 kN)
6.5 t
Main winch rope
20 mm x 240 m
Auxiliary winch rope
20 mm x 180 m
Slewing speed
0-2 rpm, 360 deg continuous
Hook block weight (80 t single hook, 12 parts of line (1,735 x 554 x 520 mm), standard; 55 t block 470 kg (8 parts), optional; 7 t block 210 kg (1 part), standard)
700 kg
Outrigger extend / retract time
Beams out 25 s / in 20 s; jacks out 40 s / in 30 s (maximum)
Hydraulic tank
1,000 L

Chassis

Number of axles
4 (8x4)
Engine model
D10.38-50
Gross power (Rated, at 2,000 rpm)
276 kW (370 hp)
Net power (Maximum net, at 2,000 rpm)
274 kW (367 hp)
Max torque (At 1,200-1,500 rpm)
1,560 Nm
Tyres
12.00R24-20PR
Top speed (Minimum; minimum stable speed 2.5-3 km/h)
80 km/h
Gradeability (max)
45 % or more
Fuel consumption per 100 km
40 L
Braking distance from 30 km/h
10 m or less
Transmission
Fast mechanical (manual) gearbox, 10 forward / 2 reverse
Suspension
Steel springs front, rubber suspension rear
Brakes
Dual-circuit air service brake on all wheels; spring-energy parking brake on axles 2, 3 and 4; engine retarder auxiliary brake
Steering
Axles 1 and 2 steered; mechanical steering with hydraulic assist
Electrical system
24 V DC, 2 batteries in series; 24 V 80 A generator