Specification sheetIssued 20 November 2026
XCMG · mobile crane
XCMG QY25K5D
XCMG QY25K5D 25 t truck crane (5-section U-shaped 10.5-41 m boom, 6x4 chassis, SDEC SC9DF300.1Q5 China V engine as standard) per XCMG's QY25K5D technical specification, 2nd edition November 2020 (bilingual), marketplace-hosted copy. The drawing numbers on the page are ours; the maker's sheet prints the dimensions without letters.
UAEGlobal
- lifting capacity
- 55,116 lb
- Main boom length (m, fully extended)
- 134 ft 6 in
- tip height
- 131 ft 7 in
- power
- 296 hp
11.2 ft41.9 ft
8.2 ftDimensions
- Rear extension (beyond frame) (Printed in brackets on the drawing, p.3)
- 1 ft 11 in
- Length, bumper to rear of frame
- 33 ft 9 in
- Track, front / rear
- 2.059 / 1.834 m
- Approach angle
- 10°
- Departure angle
- 13°
- Tail slewing radius (At the counterweight)
- 11 ft 0 in
- Outrigger span, longitudinal
- 16 ft 10 in
- Outrigger span, transverse (max) (4.34 m with outriggers half extended)
- 19 ft 8 in
- Outrigger float diameter
- 1 ft 4 in
- Turning diameter (vehicle / boom tip, min)
- 22 m or less / 26.8 m or less
Weight
- Gross vehicle weight (Maximum permissible total mass in travel)
- 71,650 lb
- Axle load, axles 1 / 2 / 3
- 7.3 / 12.6 / 12.6 t
- Max outrigger reaction (At maximum lifting capacity)
- 69,691 lbf
Crane
- Max lifting capacity (At 3 m radius (minimum rated radius))
- 55,116 lb
- Main boom length (m, fully extended)
- 134 ft 6 in
- Main boom length retracted (m)
- 34 ft 5 in
- Main boom + jib length
- 161 ft 9 in
- Boom sections
- 5, U-shaped, double-cylinder rope telescoping
- Max tip height (Fully extended main boom)
- 131 ft 7 in
- Max tip height with jib
- 159 ft 1 in
- Jib
- 8.3 m single-section lattice jib, offsets 0 / 15 / 30 deg
- Single top (Maximum load; performance as boom)
- 6,173 lb
- Max load moment, basic boom
- 1,005 kN.m
- Max load moment, fully extended boom
- 672 kN.m
- Max load moment, boom + jib
- 465 kN.m
- Rated capacity, 10.5 m boom at 8 m radius (Outriggers fully extended (5.14 x 6.0 m), over sides and rear)
- 26,235 lb
- Rated capacity, 41 m boom at 8 m radius (Same table)
- 14,550 lb
- Boom elevation angle
- -2 to 80 deg, approx. 38 s
- Boom extension time
- Approx. 93 s from 10.5 m to 41 m
- Main winch single-line speed
- 0-125 m/min (4th layer, no load)
- Auxiliary winch single-line speed
- 0-125 m/min (4th layer, no load)
- Max single line pull (Both winches)
- 6,295 lbf
- Main winch rope
- 14 mm x 180 m
- Auxiliary winch rope
- 14 mm x 105 m
- Slewing speed
- 0-2.5 rpm, 360 deg continuous
- Hook block weight (25 t block, 10 parts of line; 2.8 t auxiliary hook 55 kg (1 part))
- 655 lb
- Outrigger extend / retract time
- Beams out 35 s / in 30 s; jacks out 40 s / in 35 s
- Hydraulic tank
- 125 US gal
Chassis
- Number of axles
- 3 (6x4; axle 1 steered, axles 2-3 driven)
- Engine model
- SC9DF300.1Q5 (SDEC), 6-cyl in-line, China V; option CNHTC MC07H.32-50, 235 kW
- Gross power (Rated at 2,200 rpm; max net power 219 kW. The MC07H.32-50 option is rated 235 kW / 232 kW net)
- 296 hp
- Max torque (At 1,400 rpm (SC9DF300.1Q5); 1,200-1,600 rpm for the MC07H.32-50)
- 922 lbf·ft
- Fuel tank
- 63 US gal
- Transmission
- FAST 8-speed manual with synchronizer
- Tyres
- 11.00R20 or 11.00-20; 10 tyres and 1 spare (single front, dual middle and rear axles)
- Suspension
- Longitudinal leaf springs with shock absorbers front; rubber suspension with V-type thrust rods rear
- Brakes
- Dual-circuit air service brake on all wheels; spring parking brake on axles 2-3; exhaust brake and in-cylinder brake
- Steering
- Mechanical with hydraulic assist
- Top speed
- 80 kph or more (minimum stable speed 2.5-3 kph)
- Gradeability (max)
- 40 % or more
- Fuel consumption per 100 km
- 8 US gal
- Braking distance from 30 kph
- 10 m or less
- Cab
- Full-width steel cab, 2 seats, heater and air conditioner
- Electrical system
- 24 V DC, two battery sets; 28 V 70 A generator