XCMG QY25K5D
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

XCMG · mobile crane

XCMG QY25K5D

XCMG QY25K5D 25 t truck crane (5-section U-shaped 10.5-41 m boom, 6x4 chassis, SDEC SC9DF300.1Q5 China V engine as standard) per XCMG's QY25K5D technical specification, 2nd edition November 2020 (bilingual), marketplace-hosted copy. The drawing numbers on the page are ours; the maker's sheet prints the dimensions without letters.

UAEGlobal

lifting capacity
25 t
Main boom length (m, fully extended)
41 m
tip height
40.1 m
power
221 kW (296 hp)
XCMG QY25K5D, side view with dimensions (illustration)3.4 m12.8 m
XCMG QY25K5D, front view (illustration)2.5 m

Dimensions

Rear extension (beyond frame) (Printed in brackets on the drawing, p.3)
0.59 m
Length, bumper to rear of frame
10.295 m
Track, front / rear
2.059 / 1.834 m
Approach angle
10°
Departure angle
13°
Tail slewing radius (At the counterweight)
3.36 m
Outrigger span, longitudinal
5.14 m
Outrigger span, transverse (max) (4.34 m with outriggers half extended)
6 m
Outrigger float diameter
0.4 m
Turning diameter (vehicle / boom tip, min)
22 m or less / 26.8 m or less

Weight

Gross vehicle weight (Maximum permissible total mass in travel)
32,500 kg
Axle load, axles 1 / 2 / 3
7.3 / 12.6 / 12.6 t
Max outrigger reaction (At maximum lifting capacity)
310 kN

Crane

Max lifting capacity (At 3 m radius (minimum rated radius))
25 t
Main boom length (m, fully extended)
41 m
Main boom length retracted (m)
10.5 m
Main boom + jib length
49.3 m
Boom sections
5, U-shaped, double-cylinder rope telescoping
Max tip height (Fully extended main boom)
40.1 m
Max tip height with jib
48.5 m
Jib
8.3 m single-section lattice jib, offsets 0 / 15 / 30 deg
Single top (Maximum load; performance as boom)
2.8 t
Max load moment, basic boom
1,005 kN.m
Max load moment, fully extended boom
672 kN.m
Max load moment, boom + jib
465 kN.m
Rated capacity, 10.5 m boom at 8 m radius (Outriggers fully extended (5.14 x 6.0 m), over sides and rear)
11.9 t
Rated capacity, 41 m boom at 8 m radius (Same table)
6.6 t
Boom elevation angle
-2 to 80 deg, approx. 38 s
Boom extension time
Approx. 93 s from 10.5 m to 41 m
Main winch single-line speed
0-125 m/min (4th layer, no load)
Auxiliary winch single-line speed
0-125 m/min (4th layer, no load)
Max single line pull (Both winches)
28 kN
Main winch rope
14 mm x 180 m
Auxiliary winch rope
14 mm x 105 m
Slewing speed
0-2.5 rpm, 360 deg continuous
Hook block weight (25 t block, 10 parts of line; 2.8 t auxiliary hook 55 kg (1 part))
297 kg
Outrigger extend / retract time
Beams out 35 s / in 30 s; jacks out 40 s / in 35 s
Hydraulic tank
474 L

Chassis

Number of axles
3 (6x4; axle 1 steered, axles 2-3 driven)
Engine model
SC9DF300.1Q5 (SDEC), 6-cyl in-line, China V; option CNHTC MC07H.32-50, 235 kW
Gross power (Rated at 2,200 rpm; max net power 219 kW. The MC07H.32-50 option is rated 235 kW / 232 kW net)
221 kW (296 hp)
Max torque (At 1,400 rpm (SC9DF300.1Q5); 1,200-1,600 rpm for the MC07H.32-50)
1,250 Nm
Fuel tank
240 L
Transmission
FAST 8-speed manual with synchronizer
Tyres
11.00R20 or 11.00-20; 10 tyres and 1 spare (single front, dual middle and rear axles)
Suspension
Longitudinal leaf springs with shock absorbers front; rubber suspension with V-type thrust rods rear
Brakes
Dual-circuit air service brake on all wheels; spring parking brake on axles 2-3; exhaust brake and in-cylinder brake
Steering
Mechanical with hydraulic assist
Top speed
80 kph or more (minimum stable speed 2.5-3 kph)
Gradeability (max)
40 % or more
Fuel consumption per 100 km
30 L
Braking distance from 30 kph
10 m or less
Cab
Full-width steel cab, 2 seats, heater and air conditioner
Electrical system
24 V DC, two battery sets; 28 V 70 A generator