Specification sheetIssued 20 November 2026
Vögele · asphalt paver
Vögele SUPER 1800-3i
Vögele SUPER 1800-3i Universal Class tracked paver (Cummins B6.7-C173, EU Stage V / US EPA Tier 4f) from the maker's technical information sheet EN-09/22 V2, which also covers the SUPER 1800-3 for other countries. Weights and lengths are for the AB 500 / AB 600 extending screeds; the SprayJet version is not covered.
UAEGlobal
- paving width
- 32 ft 10 in
- power
- 173 hp
- Operating weight
- 43,431 lb
10.2 ft9.3 ft19.8 ft
8.4 ftDimensions
- Track width (track pad width, ground contact is 2,830 x 305 mm)
- 12.0 in
- Ground clearance, hopper front (as drawn at the hopper front)
- 5.9 in
- Ramp angle, front (track front angle shown on the maker's drawing; the sheet does not name it)
- 16°
- Ramp angle, rear (track rear angle shown on the maker's drawing; the sheet does not name it)
- 14°
- Feed height (centre of material hopper)
- 23.2 in
Weight
- Operating weight (tractor unit with AB 500 TV screed, pave widths up to 5 m; the sheet gives no fuel or operator basis)
- 43,431 lb
- Operating weight, pave widths up to 8.5 m (tractor unit with AB 500 TV screed extended up to 8.5 m)
- 56,108 lb
Engine
- Engine model
- Cummins B6.7-C173 (SUPER 1800-3i, EU/EFTA/USA/Canada/Japan); Cummins QSB6.7-C170 (SUPER 1800-3, other countries)
- Cylinders (sheet says '6-cylinder')
- 6, liquid-cooled diesel
- Emissions (the SprayJet sheet for the same power unit prints Stage V; the main sheet prints 'Stage VI')
- EU Stage V, US EPA Tier 4f (SUPER 1800-3i); EU Stage 3a, US EPA Tier 3 (SUPER 1800-3)
- Exhaust after-treatment
- DOC, DPF, SCR (SUPER 1800-3i)
- Net power (nominal output at 2,000 rpm according to DIN, SUPER 1800-3i (B6.7-C173); 127 kW for the SUPER 1800-3 (QSB6.7-C170); the sheet does not say net or gross)
- 173 hp
- Rated speed
- 2,000 rpm
- Net power, ECO mode (at 1,700 rpm, SUPER 1800-3i; 116 kW at 1,700 rpm for the SUPER 1800-3)
- 173 hp
- Sound power level (guaranteed)
- LWA 108 dB(A) (2000/14/EG, EN ISO 3744, EN 500-6)
- Sound pressure level at operator's stations
- LPA 85 dB(A) or less (EN ISO 11201, EN 500-6)
Performance
- Max paving width (with SB 300 fixed-width screed (TV/TP1); AB 600 9 m, AB 500 8.5 m, SB 300 HD 8 m)
- 32 ft 10 in
- Basic paving width (AB 500 screed, 2.55 m to 5 m; AB 600 3 m to 6 m; SB 300 and SB 300 HD 3 m)
- 8 ft 4 in
- Laydown rate (maximum, maker's headline figure)
- 700 t/h
- Max layer thickness (up to 30 cm)
- 11.8 in
- Paving speed
- up to 24 m/min, infinitely variable
- Travel speed (up to, infinitely variable)
- 2.8 mph
Undercarriage
- Track type
- crawler tracks with rubber pads
- Track ground contact
- 2,830 x 305 mm
- Track tension
- spring assembly
- Track roller lubrication
- lifetime
- Traction drive
- separate hydraulic drive and electronic control for each crawler track
Material hopper
- Hopper capacity
- 14.3 US tons
- Push-rollers
- oscillating as standard, can be displaced forwards by 75 mm or 150 mm; sprung (PaveDock) optional
- Conveyors
- 2, replaceable feeder bars, reversible for a short time, separate hydraulic drive for each
- Conveyor speed
- up to 34 m/min, infinitely variable (manual or automatic)
- Augers
- 2, exchangeable auger blades, reversible, separate hydraulic drive for each
- Auger diameter
- 15.7 in
- Auger speed
- up to 84 rpm, infinitely variable (manual or automatic)
- Auger height adjustment
- infinitely variable by 15 cm, hydraulic, lowest position 10 cm above the ground
- Lubrication
- automatic centralized lubrication system with electrically driven grease pump
Screed
- AB 500, width
- 2.55 m to 5 m basic, 8.5 m maximum (TV/TP1); compacting systems TV, TP1, TP2, TP2 Plus
- AB 600, width
- 3 m to 6 m basic, 9 m maximum (TV/TP1); compacting systems TV, TP1, TP2, TP2 Plus
- SB 300, width
- 3 m fixed, 10 m maximum (TV/TP1); compacting systems TV, TP1, TP2
- SB 300 HD, width
- 3 m fixed, 8 m maximum; compacting system TV
- Screed heating
- electric by heating rods (not for SB 300 HD), three-phase AC generator
Service capacities
- Fuel tank
- 79 US gal