Vögele SUPER 1800-3i
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Vögele · asphalt paver

Vögele SUPER 1800-3i

Vögele SUPER 1800-3i Universal Class tracked paver (Cummins B6.7-C173, EU Stage V / US EPA Tier 4f) from the maker's technical information sheet EN-09/22 V2, which also covers the SUPER 1800-3 for other countries. Weights and lengths are for the AB 500 / AB 600 extending screeds; the SprayJet version is not covered.

UAEGlobal

paving width
10 m
power
129 kW (173 hp)
Operating weight
19,700 kg
Vögele SUPER 1800-3i, side view with dimensions (illustration)3.1 m2.83 m6.04 m
Vögele SUPER 1800-3i, front view (illustration)2.55 m

Dimensions

Track width (track pad width, ground contact is 2,830 x 305 mm)
305 mm
Ground clearance, hopper front (as drawn at the hopper front)
150 mm
Ramp angle, front (track front angle shown on the maker's drawing; the sheet does not name it)
16°
Ramp angle, rear (track rear angle shown on the maker's drawing; the sheet does not name it)
14°
Feed height (centre of material hopper)
590 mm

Weight

Operating weight (tractor unit with AB 500 TV screed, pave widths up to 5 m; the sheet gives no fuel or operator basis)
19,700 kg
Operating weight, pave widths up to 8.5 m (tractor unit with AB 500 TV screed extended up to 8.5 m)
25,450 kg

Engine

Engine model
Cummins B6.7-C173 (SUPER 1800-3i, EU/EFTA/USA/Canada/Japan); Cummins QSB6.7-C170 (SUPER 1800-3, other countries)
Cylinders (sheet says '6-cylinder')
6, liquid-cooled diesel
Emissions (the SprayJet sheet for the same power unit prints Stage V; the main sheet prints 'Stage VI')
EU Stage V, US EPA Tier 4f (SUPER 1800-3i); EU Stage 3a, US EPA Tier 3 (SUPER 1800-3)
Exhaust after-treatment
DOC, DPF, SCR (SUPER 1800-3i)
Net power (nominal output at 2,000 rpm according to DIN, SUPER 1800-3i (B6.7-C173); 127 kW for the SUPER 1800-3 (QSB6.7-C170); the sheet does not say net or gross)
129 kW (173 hp)
Rated speed
2,000 rpm
Net power, ECO mode (at 1,700 rpm, SUPER 1800-3i; 116 kW at 1,700 rpm for the SUPER 1800-3)
129 kW (173 hp)
Sound power level (guaranteed)
LWA 108 dB(A) (2000/14/EG, EN ISO 3744, EN 500-6)
Sound pressure level at operator's stations
LPA 85 dB(A) or less (EN ISO 11201, EN 500-6)

Performance

Max paving width (with SB 300 fixed-width screed (TV/TP1); AB 600 9 m, AB 500 8.5 m, SB 300 HD 8 m)
10 m
Basic paving width (AB 500 screed, 2.55 m to 5 m; AB 600 3 m to 6 m; SB 300 and SB 300 HD 3 m)
2.55 m
Laydown rate (maximum, maker's headline figure)
700 t/h
Max layer thickness (up to 30 cm)
300 mm
Paving speed
up to 24 m/min, infinitely variable
Travel speed (up to, infinitely variable)
4.5 km/h

Undercarriage

Track type
crawler tracks with rubber pads
Track ground contact
2,830 x 305 mm
Track tension
spring assembly
Track roller lubrication
lifetime
Traction drive
separate hydraulic drive and electronic control for each crawler track

Material hopper

Hopper capacity
13 t
Push-rollers
oscillating as standard, can be displaced forwards by 75 mm or 150 mm; sprung (PaveDock) optional
Conveyors
2, replaceable feeder bars, reversible for a short time, separate hydraulic drive for each
Conveyor speed
up to 34 m/min, infinitely variable (manual or automatic)
Augers
2, exchangeable auger blades, reversible, separate hydraulic drive for each
Auger diameter
400 mm
Auger speed
up to 84 rpm, infinitely variable (manual or automatic)
Auger height adjustment
infinitely variable by 15 cm, hydraulic, lowest position 10 cm above the ground
Lubrication
automatic centralized lubrication system with electrically driven grease pump

Screed

AB 500, width
2.55 m to 5 m basic, 8.5 m maximum (TV/TP1); compacting systems TV, TP1, TP2, TP2 Plus
AB 600, width
3 m to 6 m basic, 9 m maximum (TV/TP1); compacting systems TV, TP1, TP2, TP2 Plus
SB 300, width
3 m fixed, 10 m maximum (TV/TP1); compacting systems TV, TP1, TP2
SB 300 HD, width
3 m fixed, 8 m maximum; compacting system TV
Screed heating
electric by heating rods (not for SB 300 HD), three-phase AC generator

Service capacities

Fuel tank
300 L