Takeuchi TB240
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Takeuchi · mini excavator

Takeuchi TB240

Takeuchi TB240 conventional-tail-swing mini excavator (Yanmar 4TNV88C, DOC and DPF, 350 mm rubber tracks, long arm 1.6 m, angle-ready dozer blade), cab machine per Takeuchi UK's TB240 specification sheet dated 12/2024. Letters A-O are those of the Takeuchi US sheet dated Dec. 2017, whose working-range drawing uses the same dimensions; rows without a letter are not lettered on either drawing.

UAEUSAGlobal

digging depth
11 ft 4.4 in
Operating weight
8,900 lb
Takeuchi TB240, side view with dimensions (illustration)8.2 ft5.4 ft16.7 ft
Takeuchi TB240, front view (illustration)

Weight

Operating weight (cab, long arm, rubber tracks, with bucket, hitch and fuel; UK sheet)
8,900 lb
Operating weight (canopy) (US sheet)
8,570 lb
Operating weight (cab, US) (US sheet)
8,990 lb

Performance

Bucket digging force (UK sheet)
6,924 lbf
Bucket breakout force (maximum, US sheet (4,517 kgf))
9,959 lbf
Arm digging force (US sheet 1,864 kgf)
4,110 lbf
Arm length (long arm)
5 ft 3 in
Swing speed
9.6 rpm
Boom swing, left
77°
Boom swing, right
57°
Travel speed (high)
3.3 mph
Travel speed (low)
1.8 mph
Max drawbar pull (Maker's term: traction force; US sheet (4,324 kgf))
9,533 lbf
Max gradeability
30°
Ground pressure
31.6 kPa (4.6 psi) cab; 30.2 kPa (4.4 psi) canopy
Lifting capacity over front, blade down (2.743 m radius) (ground level, 9 ft radius, ISO 10567)
3,683 lb
Lifting capacity over front, blade down (3.657 m radius) (ground level, 12 ft radius, ISO 10567)
2,462 lb
Lifting capacity over side (2.743 m radius) (ground level, 9 ft radius, ISO 10567)
2,019 lb
Lifting capacity over side (3.657 m radius) (ground level, 12 ft radius, ISO 10567)
1,356 lb
AMax digging reach (max digging reach)
18 ft 2.3 in
BMax reach at ground level
17 ft 9.6 in
CMax digging depth
11 ft 4.4 in
DMax vertical wall digging depth
8 ft 8.9 in
EMax digging height (US sheet 5,244 mm)
17 ft 2.5 in
FMax dumping height
12 ft 6.6 in
Max reach at vertical digging depth
12 ft 2.7 in

Engine

Engine model (US sheet: Yanmar 4TNV88C; DOC and DPF aftertreatment)
Yanmar 4TNV88C-CSTB (DPF)
Cylinders
4
Displacement
133.6 cu in
Engine power (rated output at 2,200 rpm)
35.8 hp
Max torque (UK sheet; US sheet 139.1 Nm at 1,430 rpm)
106.9 ft-lb
Fuel consumption (at 65% of full load; US sheet)
4.8 L/h (1.2 gal/hr)
Electrical system (US feature list: 40 A alternator)
12 V, 90 A alternator
Emissions
EU Stage V (DOC and DPF); U.S. EPA Final Tier 4 on US-market machines

Hydraulics

Pump type
Variable x 2 + gear x 2
Pump flow
30.6 gpm
Max pressure (set pressure (24.0 MPa))
3,481 psi
Auxiliary flow (1st circuit) (at 206 bar)
17.2 gpm
Auxiliary flow (2nd circuit) (at 206 bar, optional)
6.1 gpm
Slew motor
Constant-volume piston motor, disc brake
Auxiliary circuit relief
2,988 psi

Undercarriage

Traction drive
Variable-displacement motors, planetary epicyclic gear, wet friction plate brake
Track rollers
Triple-flange

Blade

Blade width
5 ft 8.5 in
Blade height
15.6 in
Max blade height (Blade lift above ground; read from the working-range drawing)
15.9 in
Max blade depth (Blade drop below ground; read from the working-range drawing)
15.2 in

Service capacities

Fuel tank
18.5 gal
Engine oil, with filter (engine lubrication)
7.8 qt
Cooling system
9.5 qt
Hydraulic tank (hydraulic reservoir; US sheet)
10.8 gal
Hydraulic system, with tank
19.5 gal

Noise and vibration

Sound power level
96 dB (LwA)
Hand-arm vibration
2.5 m/s2 or less
Whole-body vibration
0.5 m/s2 or less