Specification sheetIssued 20 November 2026
Takeuchi · mini excavator
Takeuchi TB240
Takeuchi TB240 conventional-tail-swing mini excavator (Yanmar 4TNV88C, DOC and DPF, 350 mm rubber tracks, long arm 1.6 m, angle-ready dozer blade), cab machine per Takeuchi UK's TB240 specification sheet dated 12/2024. Letters A-O are those of the Takeuchi US sheet dated Dec. 2017, whose working-range drawing uses the same dimensions; rows without a letter are not lettered on either drawing.
UAEUSAGlobal
- digging depth
- 3.465 m
- Operating weight
- 4,037 kg
2.49 m1.65 m5.09 m
Weight
- Operating weight (cab, long arm, rubber tracks, with bucket, hitch and fuel; UK sheet)
- 4,037 kg
- Operating weight (canopy) (US sheet)
- 3,890 kg
- Operating weight (cab, US) (US sheet)
- 4,080 kg
Performance
- Bucket digging force (UK sheet)
- 31 kN
- Bucket breakout force (maximum, US sheet (4,517 kgf))
- 44 kN
- Arm digging force (US sheet 1,864 kgf)
- 18 kN
- Arm length (long arm)
- 1.6 m
- Swing speed
- 9.6 rpm
- Boom swing, left
- 77°
- Boom swing, right
- 57°
- Travel speed (high)
- 5.3 km/h
- Travel speed (low)
- 2.9 km/h
- Max drawbar pull (Maker's term: traction force; US sheet (4,324 kgf))
- 42 kN
- Max gradeability
- 30°
- Ground pressure
- 31.6 kPa (4.6 psi) cab; 30.2 kPa (4.4 psi) canopy
- Lifting capacity over front, blade down (2.743 m radius) (ground level, 9 ft radius, ISO 10567)
- 1,670 kg
- Lifting capacity over front, blade down (3.657 m radius) (ground level, 12 ft radius, ISO 10567)
- 1,116 kg
- Lifting capacity over side (2.743 m radius) (ground level, 9 ft radius, ISO 10567)
- 915 kg
- Lifting capacity over side (3.657 m radius) (ground level, 12 ft radius, ISO 10567)
- 615 kg
- AMax digging reach (max digging reach)
- 5.545 m
- BMax reach at ground level
- 5.425 m
- CMax digging depth
- 3.465 m
- DMax vertical wall digging depth
- 2.665 m
- EMax digging height (US sheet 5,244 mm)
- 5.245 m
- FMax dumping height
- 3.825 m
- Max reach at vertical digging depth
- 3.725 m
Engine
- Engine model (US sheet: Yanmar 4TNV88C; DOC and DPF aftertreatment)
- Yanmar 4TNV88C-CSTB (DPF)
- Cylinders
- 4
- Displacement
- 2.2 L
- Engine power (rated output at 2,200 rpm)
- 26.7 kW (35.8 hp)
- Max torque (UK sheet; US sheet 139.1 Nm at 1,430 rpm)
- 145 Nm
- Fuel consumption (at 65% of full load; US sheet)
- 4.8 L/h (1.2 gal/hr)
- Electrical system (US feature list: 40 A alternator)
- 12 V, 90 A alternator
- Emissions
- EU Stage V (DOC and DPF); U.S. EPA Final Tier 4 on US-market machines
Hydraulics
- Pump type
- Variable x 2 + gear x 2
- Pump flow
- 116 L/min
- Max pressure (set pressure (24.0 MPa))
- 240 bar
- Auxiliary flow (1st circuit) (at 206 bar)
- 65 L/min
- Auxiliary flow (2nd circuit) (at 206 bar, optional)
- 23 L/min
- Slew motor
- Constant-volume piston motor, disc brake
- Auxiliary circuit relief
- 206 bar
Undercarriage
- Traction drive
- Variable-displacement motors, planetary epicyclic gear, wet friction plate brake
- Track rollers
- Triple-flange
Blade
- Blade width
- 1.74 m
- Blade height
- 0.395 m
- Max blade height (Blade lift above ground; read from the working-range drawing)
- 0.405 m
- Max blade depth (Blade drop below ground; read from the working-range drawing)
- 0.385 m
Service capacities
- Fuel tank
- 70 L
- Engine oil, with filter (engine lubrication)
- 7.4 L
- Cooling system
- 9 L
- Hydraulic tank (hydraulic reservoir; US sheet)
- 41 L
- Hydraulic system, with tank
- 74 L
Noise and vibration
- Sound power level
- 96 dB (LwA)
- Hand-arm vibration
- 2.5 m/s2 or less
- Whole-body vibration
- 0.5 m/s2 or less