Tadano GR-1000XL-4
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Tadano · mobile crane

Tadano GR-1000XL-4

Tadano GR-1000XL-4, 100 US ton (90.7 t) 2-axle rough terrain crane, left-hand drive, 12.0-47.0 m five-section boom, Cummins B6.7 280 hp engine, 29.5-25 tyres, 9.1 t self-removable counterweight, per Tadano's North American specification GR-1000-4-00103/US-01 (imperial with metric values) and the Tadano America brochure; the 51 m GR-1000XLL-4 and the GR-800XL-4 are not covered.

UAEGlobal

lifting capacity
100 US tons
Main boom length (m, fully extended)
154.2 ft
tip height
154.5 ft
power
280 hp
Tadano GR-1000XL-4, side view with dimensions (illustration)12.5 ft47.2 ft
Tadano GR-1000XL-4, front view (illustration)10.9 ft

Dimensions

Turning radius, 4-wheel steer (29.5-25 tyres, outside of the tyre track)
22 ft 4 in
Turning radius, 2-wheel steer (29.5-25 tyres)
35 ft 9 in
Outrigger span, transverse (max) (Selectable 2.7 / 5.5 / 6.7 / 7.3 m centre to centre)
23 ft 11 in
Outrigger float diameter
2 ft 0 in
Outrigger span, longitudinal (Estimate: front outrigger to slewing centre 3.55 m + slewing centre to rear outrigger 3.78 m)
24 ftest.
Boom head to front of carrier (Estimate: boom head to front axle 8.02 m minus front overhang 2.225 m (carrier length 8.58 m less wheelbase 3.95 m and rear overhang 2.405 m))
19 ftest.

Weight

Gross vehicle weight (Base machine with all removable items (hook blocks, jib, 9,100 kg counterweight); 26,520 kg front and 26,650 kg rear axle)
117,220 lb
Gross vehicle weight, without counterweight (Brochure road weight; counterweight removed (9,100 kg; front axle +3,490 kg, rear axle -12,590 kg when removed))
97,200 lb
Counterweight (Self-removable; Smart Counterweight mounts at the front (CW1) or rear (CW2))
20,100 lb
Hook block, 100 ton (8 sheaves; 7.3 ton weighted hook 165 kg (360 lb))
1,900 lb
Bi-fold jib weight (Base jib; top jib 336 kg (740 lb))
1,910 lb

Crane

Max lifting capacity (Rated capacity)
100 US tons
Main boom length (m, fully extended)
154.2 ft
Main boom length retracted (m)
39.4 ft
Boom sections
5, full power, partially synchronized (2 telescope cylinders with extension and retraction cables); two telescoping modes
Max tip height (Main boom; 64.4 m (211.3 ft) with jib)
154.5 ft
Max load radius, boom
145.0 ft
Max load radius, jib (With the 17.7 m jib)
180.0 ft
Jib
2-stage bi-fold lattice, 10.1 m / 17.7 m, 3.5 / 25 / 45 deg offset, assist cylinders for mounting
Counterweight carried
9.1 t self-removable counterweight; operation without it is prohibited
Boom elevation angle
-1.5 to +80.5 deg
Boom raising time
20 to 60 deg in 46 s
Boom extension time
35.0 m (114.8 ft) in 155 s
Slewing speed
1.5 rpm, 360 deg continuous, twin slewing system with 360 deg positive slewing lock
Hoist single-line speed
Main and auxiliary: 84 m/min low / 118 m/min high on the 1st layer, up to 130 / 181 m/min on the 7th layer
Max single line pull (1st layer, low speed; 6,520 kgf (14,400 lb) at high speed; rope-limited pull 6,600 kg)
20,000 lb
Hoist rope
19 mm non-rotating; main drum 253 m, auxiliary drum 139 m; drum 362 mm root diameter x 681 mm wide, 346 m storage over 7 layers
Hydraulic tank capacity
210 gal
Crane hydraulic pumps
2 variable piston pumps for crane functions, tandem gear pump for steering, slewing and auxiliary systems
Load moment indicator
Tadano AML-E2 with Smart Chart (outrigger width detection, asymmetric extension)

Chassis

Drive / steer
4x4x4; 4x2 front drive or 4x4 selected by switch; 4 steering modes (2-wheel front, 2-wheel rear, 4-wheel coordinated, crab)
Engine model
Cummins B6.7, 6-cyl, 4-stroke direct-injection diesel, turbocharged and aftercooled; 107 x 124 mm bore and stroke
Displacement
409 cu in
Gross power (At 2,200 rpm)
280 hp
Max torque (At 1,500 rpm)
850 lbf-ft
Fuel tank (Right side of carrier)
79.2 gal
DEF/AdBlue tank
15.0 gal
Engine oil capacity
4.0 gal
Cooling system capacity
2.7 gal
Electrical system
24 V system, two 120 Ah batteries; air compressor 17.0 CFM (481 L/min) at 2,400 rpm
Transmission
Electronically controlled full automatic powershift with torque converter, 6 forward / 2 reverse; 3 high-range speeds (2WD or 4WD) and 3 low-range speeds (4WD)
Top speed
22 mph
Gradeability (max)
93 % at stall, 57 % within the engine crankcase limit (30 deg)
Axles
Front and rear full-floating steer/drive axles with planetary reduction; non-spin rear differential
Suspension
Front rigid mounted to the frame; rear pivot mounted with hydraulic lockout
Tyres
29.5-25 36PR or 40PR (OR); 470 kPa (68 psi) and 465 kPa (67 psi)
Brakes
Air-over-hydraulic disc brakes on all 4 wheels; spring-applied parking brake on the front axle input shaft; electro-pneumatic exhaust brake
Outriggers
4 hydraulic beam-and-jack outriggers, independently controlled from the cab, self-attaching floats of 0.6 m diameter
Steering
Hydraulic power steering; four modes: 2-wheel front, 2-wheel rear, 4-wheel coordinated and 4-wheel crab
Number of axles
2; front and rear full-floating steering and driving axles with planetary reduction (4x4x4)