Specification sheetIssued 20 November 2026
Shantui · dozer
Shantui SD22
Shantui SD22 (Cummins NT855-C280S10, straight-tilt blade, 560 mm single-grouser shoes) from Shantui's SD22 product sheet (Shantui Construction Machinery, Jining, dealer-hosted copy). The sheet is unlettered: dimension numbers here are ours, and the drawing shows the straight-tilt blade with a ripper fitted.
UAEGlobal
- Blade capacity
- 8.37 yd³
- Operating weight
- 51,588 lb
- Blade width
- 12.2 ft
9 ft19.9 ft
8.6 ftDimensions
- Ground clearance (All three blade types)
- 1.3 ft
- Overall length (with blade) (Machine external dimensions 6,060 x 4,200 x 3,402 mm (L x W x H) on Shantui's SD22 product page; blade type not stated)
- 19.9 ft
Weight
- Operating weight (Standard SD22)
- 51,588 lb
- Blade weight (straight-tilt) (3,254 kg angle blade, 3,419 kg semi-U blade)
- 6,239 lb
Performance
- Min turning radius
- 10.8 ft
- Gradeability
- 30°
- Blade capacity (Straight-tilt; 4.7 m3 angle blade, 7.5 m3 semi-U blade)
- 8.37 yd³
- Blade productivity (Straight-tilt, Shantui's theoretical value over 40 m; 245 m3/h angle, 365 m3/h semi-U)
- 330 m³/h
- Digging depth (Maximum drop below ground, straight-tilt; 0.535 m angle, 0.54 m semi-U)
- 1.8 ft
- Blade lift height (Read from the overall-dimensions drawing)
- 4 ft
- Maximum tilt at blade corner (Straight-tilt; over 500 mm angle blade, over 755 mm semi-U blade)
- Over 735 mm
- Ground pressure (0.077 MPa straight-tilt and angle blade; 0.078 MPa semi-U blade)
- 77 kPa (0.077 MPa)
Engine
- Engine model
- Cummins NT855-C280S10
- Type
- In-line, water-cooled 4-cycle, overhead valve, direct injection, turbocharged diesel
- Cylinders
- 6
- Bore x stroke
- 139.7 x 152.4 mm
- Displacement
- 3.7 US gal
- Rated power (At 1,800 rpm, Cummins NT855-C280S10 build per the product sheet; Shantui does not say whether gross or net. Shantui's product page instead lists 175 kW at 1,800 rpm for the SD22 alongside both the Cummins NT855-C280S10 and the Weichai WP12G240E306 engine, without saying which engine it applies to)
- 220 HP
- Rated speed
- 1,800 rpm
- Max torque (At 1,250 rpm)
- 760 lbf·ft
- Max torque speed
- 1,250 rpm
- Min fuel consumption
- 205 g/kWh
- Emissions (Shantui's SD22 product page, which lists both the Cummins NT855-C280S10 and Weichai WP12G240E306 engines)
- EU Stage II
Transmission
- Torque converter
- 3-element, 1 stage, 1 phase
- Transmission
- Planetary gear, multi-disc clutch, hydraulically connected, forced lubrication; 3 forward / 3 reverse
- Main drive
- Spiral bevel gear, splash lubrication, single-stage speed reduction
- Steering clutch
- Wet, multi-disc, spring loaded, hydraulically separated, hydraulic control
- Steering brake
- Wet, floating, direct on-off hydraulic inter-linking operation
- Final drive
- 2-stage speed reduction of spur gear, splash lubrication
- Travel speed, forward (max) (3rd; 1st 3.6, 2nd 6.5 km/h)
- 7 mph
- Travel speed, reverse (max) (3rd; 1st 4.3, 2nd 7.7 km/h)
- 8.2 mph
- Travel speed, 1st forward
- 2.2 mph
- Travel speed, 2nd forward
- 4 mph
- Travel speed, 1st reverse
- 2.7 mph
- Travel speed, 2nd reverse
- 4.8 mph
Undercarriage
- Undercarriage
- Swing-type sprayed beam, suspended structure of equalizer bar
- Track type
- Assembled, single-grouser
- Track rollers (each side)
- 6
- Carrier rollers (each side)
- 2
- Track pitch
- 0.7 ft
Hydraulics
- Pump type
- Gear pump
- Pump flow
- 69.2 US gpm
- Max pressure
- 14 MPa
- Blade lift cylinders (Shantui lists "bore of working cylinder x no." as 120 mm x 2)
- 2 - bore 120 mm
Ripper
- Ripper maximum penetration (3-shank ripper (optional))
- 2.2 ft
- Ripper maximum lift above ground (3-shank ripper)
- 1.8 ft
- Ripper weight (3-shank)
- 5,501 lb
- Ripper maximum penetration (single shank) (Single-shank ripper (optional))
- 2.3 ft
- Ripper maximum lift above ground (single shank)
- 1.7 ft
- Ripper weight (single shank)
- 5,408 lb
Service capacities
- Fuel tank (From Shantui's SD22 product page, which lists the SD22 range; the sheet and the page differ in engine rating (see conflicts).)
- 118.9 US gal