Shantui SD22
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Shantui · dozer

Shantui SD22

Shantui SD22 (Cummins NT855-C280S10, straight-tilt blade, 560 mm single-grouser shoes) from Shantui's SD22 product sheet (Shantui Construction Machinery, Jining, dealer-hosted copy). The sheet is unlettered: dimension numbers here are ours, and the drawing shows the straight-tilt blade with a ripper fitted.

UAEGlobal

Blade capacity
6.4 m³
Operating weight
23,400 kg
Blade width
3.725 m
Shantui SD22, side view with dimensions (illustration)2.73 m6.06 m
Shantui SD22, front view (illustration)2.62 m

Dimensions

Ground clearance (All three blade types)
0.405 m
Overall length (with blade) (Machine external dimensions 6,060 x 4,200 x 3,402 mm (L x W x H) on Shantui's SD22 product page; blade type not stated)
6.06 m

Weight

Operating weight (Standard SD22)
23,400 kg
Blade weight (straight-tilt) (3,254 kg angle blade, 3,419 kg semi-U blade)
2,830 kg

Performance

Min turning radius
3.3 m
Gradeability
30°
Blade capacity (Straight-tilt; 4.7 m3 angle blade, 7.5 m3 semi-U blade)
6.4 m³
Blade productivity (Straight-tilt, Shantui's theoretical value over 40 m; 245 m3/h angle, 365 m3/h semi-U)
330 m³/h
Digging depth (Maximum drop below ground, straight-tilt; 0.535 m angle, 0.54 m semi-U)
0.538 m
Blade lift height (Read from the overall-dimensions drawing)
1.21 m
Maximum tilt at blade corner (Straight-tilt; over 500 mm angle blade, over 755 mm semi-U blade)
Over 735 mm
Ground pressure (0.077 MPa straight-tilt and angle blade; 0.078 MPa semi-U blade)
77 kPa (0.077 MPa)

Engine

Engine model
Cummins NT855-C280S10
Type
In-line, water-cooled 4-cycle, overhead valve, direct injection, turbocharged diesel
Cylinders
6
Bore x stroke
139.7 x 152.4 mm
Displacement
14 L
Rated power (At 1,800 rpm, Cummins NT855-C280S10 build per the product sheet; Shantui does not say whether gross or net. Shantui's product page instead lists 175 kW at 1,800 rpm for the SD22 alongside both the Cummins NT855-C280S10 and the Weichai WP12G240E306 engine, without saying which engine it applies to)
162 kW (220 HP)
Rated speed
1,800 rpm
Max torque (At 1,250 rpm)
1,030 Nm
Max torque speed
1,250 rpm
Min fuel consumption
205 g/kWh
Emissions (Shantui's SD22 product page, which lists both the Cummins NT855-C280S10 and Weichai WP12G240E306 engines)
EU Stage II

Transmission

Torque converter
3-element, 1 stage, 1 phase
Transmission
Planetary gear, multi-disc clutch, hydraulically connected, forced lubrication; 3 forward / 3 reverse
Main drive
Spiral bevel gear, splash lubrication, single-stage speed reduction
Steering clutch
Wet, multi-disc, spring loaded, hydraulically separated, hydraulic control
Steering brake
Wet, floating, direct on-off hydraulic inter-linking operation
Final drive
2-stage speed reduction of spur gear, splash lubrication
Travel speed, forward (max) (3rd; 1st 3.6, 2nd 6.5 km/h)
11.2 km/h
Travel speed, reverse (max) (3rd; 1st 4.3, 2nd 7.7 km/h)
13.2 km/h
Travel speed, 1st forward
3.6 km/h
Travel speed, 2nd forward
6.5 km/h
Travel speed, 1st reverse
4.3 km/h
Travel speed, 2nd reverse
7.7 km/h

Undercarriage

Undercarriage
Swing-type sprayed beam, suspended structure of equalizer bar
Track type
Assembled, single-grouser
Track rollers (each side)
6
Carrier rollers (each side)
2
Track pitch
216 mm

Hydraulics

Pump type
Gear pump
Pump flow
262 L/min
Max pressure
14 MPa
Blade lift cylinders (Shantui lists "bore of working cylinder x no." as 120 mm x 2)
2 - bore 120 mm

Ripper

Ripper maximum penetration (3-shank ripper (optional))
0.666 m
Ripper maximum lift above ground (3-shank ripper)
0.555 m
Ripper weight (3-shank)
2,495 kg
Ripper maximum penetration (single shank) (Single-shank ripper (optional))
0.695 m
Ripper maximum lift above ground (single shank)
0.515 m
Ripper weight (single shank)
2,453 kg

Service capacities

Fuel tank (From Shantui's SD22 product page, which lists the SD22 range; the sheet and the page differ in engine rating (see conflicts).)
450 L