Specification sheetIssued 20 November 2026
Scania · truck
Scania R 730
Scania R 730 6x4 prime mover (tractor), CR20 high-roof sleeper cab, 3,825 mm wheelbase, DC16 V8 Euro 6 - Scania Australia chassis specification SAU2020-3 (25-03-2020); Scania publishes no Middle East R 730 sheet online. Same chassis geometry as the R 500 6x4 on our scania-r500 page.
UAEGlobal
- power
- 730 hp
- torque
- 2,581 lb-ft
- Wheelbase
- 12.5 ft
11.4 ft22.5 ft
Dimensions
- Bumper to back of cab (BBC) (Printed as front to back of cab; CR20 cab)
- 90.2 in
- Frame width (Scania F950 frame)
- 2.5 ft
Engine
- Engine model
- Scania DC16 730, 16.4 L 90 degree V8
- Emissions
- Euro 6 (SCR + EGR)
- Cylinders
- 8
- Displacement
- 4.3 US gal
- Gross power (at 1,900 rpm)
- 730 hp
- Max torque (at 1,000-1,400 rpm)
- 2,581 lb-ft
- Fuel system
- Scania XPI fuel injection, variable-geometry turbocharger, EGR/SCR with catalytic converter
- Filtration
- Centrifugal engine oil filter, spin-on turbocharger oil filter, cartridge fuel filters; air cleaner under the front grille
- Cooling fan
- Electronically controlled viscous drive
- Alternator
- 24 V, 150 A
- Air compressor (Knorr 720 twin cylinder, with air dryer)
- 211.3 US gpm
- Exhaust brake (DC16 range rating, at 2,400 rpm)
- 402 hp
- DC16 engine range
- 530-770 hp, 2,800-3,700 Nm
Transmission
- Gearbox
- Scania GRSO925R overdrive 14-speed, Opticruise automated, with gearbox oil cooler
- Retarder
- Scania R4100D
- Power take-off
- Electrical preparation only
- Rear axle ratio
- 3.42, with power divider and differential locks
- Rear axles
- Scania AD200SA housings, RB662/R660 differentials
- Front axle
- Scania AM420S
Weight
- Kerb weight (front 6,370 kg + rear 4,205 kg; tanks full of fuel and urea, without turntable, bull bar or driver; +/- 5%)
- 23,314 lb
- Front axle load (front spring capacity)
- 16,535 lb
- Rear axle load (rear air suspension capacity)
- 41,888 lb
Chassis
- Frame
- Scania F950, 270 x 90 x 9.5 mm
- Front suspension
- 3 x 29 parabolic leaf springs, 7,500 kg capacity, anti-roll bar
- Rear suspension
- Scania 4-bag air suspension, 19,000 kg capacity
- Brakes
- Scania electronically controlled disc brakes, EBS with ABS and traction control, hill hold
- Batteries
- 24 V (2 x 12 V, 230 A), rear of chassis
- Cab
- Scania CR20 high-roof sleeper, four-point air suspension, electric tilt, ECE R29 cab strength
- Beds
- Lower bed extendable 800-1,000 mm, upper bed 700 mm
- Front bumper
- Front underrun protection to ECE R93
Tyres
- Tyres
- 295/80 R22.5 front and rear (Bridgestone), 22.5 x 8.25 polished Alcoa aluminium rims, 335 mm PCD
Service capacities
- Fuel tank (710 L left + 320 L right)
- 272.1 US gal
- AdBlue tank (right-hand side)
- 19.8 US gal