Scania R 730
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Scania · truck

Scania R 730

Scania R 730 6x4 prime mover (tractor), CR20 high-roof sleeper cab, 3,825 mm wheelbase, DC16 V8 Euro 6 - Scania Australia chassis specification SAU2020-3 (25-03-2020); Scania publishes no Middle East R 730 sheet online. Same chassis geometry as the R 500 6x4 on our scania-r500 page.

UAEGlobal

power
537 kW (730 hp)
torque
3,500 Nm
Wheelbase
3.825 m
Scania R 730, side view with dimensions (illustration)3.46 m6.87 m
Scania R 730, front view (illustration)

Dimensions

Bumper to back of cab (BBC) (Printed as front to back of cab; CR20 cab)
2.29 m
Frame width (Scania F950 frame)
0.77 m

Engine

Engine model
Scania DC16 730, 16.4 L 90 degree V8
Emissions
Euro 6 (SCR + EGR)
Cylinders
8
Displacement
16.4 L
Gross power (at 1,900 rpm)
537 kW (730 hp)
Max torque (at 1,000-1,400 rpm)
3,500 Nm
Fuel system
Scania XPI fuel injection, variable-geometry turbocharger, EGR/SCR with catalytic converter
Filtration
Centrifugal engine oil filter, spin-on turbocharger oil filter, cartridge fuel filters; air cleaner under the front grille
Cooling fan
Electronically controlled viscous drive
Alternator
24 V, 150 A
Air compressor (Knorr 720 twin cylinder, with air dryer)
800 L/min
Exhaust brake (DC16 range rating, at 2,400 rpm)
300 kW (402 hp)
DC16 engine range
530-770 hp, 2,800-3,700 Nm

Transmission

Gearbox
Scania GRSO925R overdrive 14-speed, Opticruise automated, with gearbox oil cooler
Retarder
Scania R4100D
Power take-off
Electrical preparation only
Rear axle ratio
3.42, with power divider and differential locks
Rear axles
Scania AD200SA housings, RB662/R660 differentials
Front axle
Scania AM420S

Weight

Kerb weight (front 6,370 kg + rear 4,205 kg; tanks full of fuel and urea, without turntable, bull bar or driver; +/- 5%)
10,575 kg
Front axle load (front spring capacity)
7,500 kg
Rear axle load (rear air suspension capacity)
19,000 kg

Chassis

Frame
Scania F950, 270 x 90 x 9.5 mm
Front suspension
3 x 29 parabolic leaf springs, 7,500 kg capacity, anti-roll bar
Rear suspension
Scania 4-bag air suspension, 19,000 kg capacity
Brakes
Scania electronically controlled disc brakes, EBS with ABS and traction control, hill hold
Batteries
24 V (2 x 12 V, 230 A), rear of chassis
Cab
Scania CR20 high-roof sleeper, four-point air suspension, electric tilt, ECE R29 cab strength
Beds
Lower bed extendable 800-1,000 mm, upper bed 700 mm
Front bumper
Front underrun protection to ECE R93

Tyres

Tyres
295/80 R22.5 front and rear (Bridgestone), 22.5 x 8.25 polished Alcoa aluminium rims, 335 mm PCD

Service capacities

Fuel tank (710 L left + 320 L right)
1,030 L
AdBlue tank (right-hand side)
75 L