Mack Pinnacle
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Mack · truck

Mack Pinnacle

Mack Pinnacle axle-forward (PI / CHU613) 6x4 tractor, day cab, dimensions from the Mack Body Builder Instructions Section 0 (USA173626874, 7.2023) page 65; engine and rating rows from Mack's current MP8 and Pinnacle pages. The axle-back Pinnacle (CXU) appears only in the rows marked CXU603 sheet, taken from an older Mack spec sheet.

USAGlobal

Wheelbase
177.5 in
Mack Pinnacle, side view with dimensions (illustration)9.4 ft21.9 ft
Mack Pinnacle, front view (illustration)7.9 ft

Dimensions

Overall length (Estimate: front overhang 29.8 + wheelbase 177.5 + rear overhang 56 in, bumper to end of frame)
263.3 inest.
Rear overhang (Centre of the rear tandem to end of frame)
56 in
Back of cab to exhaust stack (back of cab to the rear edge of the exhaust stack as dimensioned)
11.5 in
Back of cab to end of frame (printed 147 in; the 90 in and 56 in sections sum to 146 in)
147 in
Frame height (derived: overall height 112.5 in minus cab height above frame 73.4 in)
39.1 in
Hood width (plan view)
42.5 in
Hood opening height (maximum height from frame rail with the hood open, hood opening angle 65 +/- 5 degrees)
72.50 in

Engine

Engine model
Mack MP8, 13 L in-line 6, direct injection (Pinnacle's engine)
Displacement
780 cu in
Gross power
415-505 hp (310-377 kW)
Max torque (the Pinnacle page prints 1,560-1,860 lb-ft in its base-configuration table and 1,650-1,900 lb-ft in its engine section)
1,650-1,900 lb-ft (2,237-2,576 Nm)
Bore x stroke
131 mm x 158 mm (5.16 x 6.22 in)
Compression ratio
16:1
Engine brake (engine brake retarding power)
500 hp @ 2,100 rpm
Dry engine weight
2,597 lb
Idle speed
600 rpm low (adjustable), 2,100 rpm high
Clutch engagement torque
1,215 lb-ft @ 800 rpm

Transmission

Gearbox
Mack mDRIVE 12-speed automated manual (standard); mDRIVE HD 12, 13 or 14-speed, Allison 4500 RDS 6-speed automatic, Eaton-Fuller 10, 13 or 18-speed manual
Axles
Mack, Meritor or Dana Spicer front and drive axles
Axle configurations
Axle-forward CHU612 (4x2), CHU613 (6x4) and CHU614 (8x6); axle-back CXU612/613/614

Weight

Gross vehicle weight (range 35,000-62,000 lb (15,876-28,123 kg); GCW 80,000 lb and above)
62,000 lb max GVW
Gross combination weight (Mack lists 80,000+ lb; kg is the 80,000 lb figure)
80,000 lb and above
Weight class
Class 8
Front axle rating (CXU603 sheet) (older axle-back Pinnacle spec sheet, Mack FXL12)
12,000 lb
Rear axle rating (CXU603 sheet) (older axle-back Pinnacle spec sheet, Meritor RT40-145)
40,000 lb

Chassis

Cab
Day cab (page lists no sleeper); axle-forward set-forward front axle, tilt hood
Frame rails (CXU603 sheet)
10.47 x 3.54 x 0.24 in steel, 11.6 in3 section modulus, 1,390,000 lb-in resisting bending moment per rail (older axle-back sheet)
Front suspension (CXU603 sheet)
Mack taperleaf 12,000 lb, 2-leaf (older axle-back sheet)
Rear suspension (CXU603 sheet)
Mack Maxlite 40EZ 40,000 lb (older axle-back sheet)

Tyres

Tyres (CXU603 sheet)
295/75R22.5 low profile on 22.5 x 8.25 Alcoa aluminium discs (older axle-back sheet)

Service capacities

Fuel tanks (CXU603 sheet) (older axle-back sheet: 93 gal LH and RH, 26 in diameter aluminium)
2 x 93 US gal