Mack Pinnacle
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Mack · truck

Mack Pinnacle

Mack Pinnacle axle-forward (PI / CHU613) 6x4 tractor, day cab, dimensions from the Mack Body Builder Instructions Section 0 (USA173626874, 7.2023) page 65; engine and rating rows from Mack's current MP8 and Pinnacle pages. The axle-back Pinnacle (CXU) appears only in the rows marked CXU603 sheet, taken from an older Mack spec sheet.

USAGlobal

Wheelbase
4.509 m
Mack Pinnacle, side view with dimensions (illustration)2.86 m6.69 m
Mack Pinnacle, front view (illustration)2.41 m

Dimensions

Overall length (Estimate: front overhang 29.8 + wheelbase 177.5 + rear overhang 56 in, bumper to end of frame)
6.688 mest.
Rear overhang (Centre of the rear tandem to end of frame)
1.422 m
Back of cab to exhaust stack (back of cab to the rear edge of the exhaust stack as dimensioned)
0.292 m
Back of cab to end of frame (printed 147 in; the 90 in and 56 in sections sum to 146 in)
3.734 m
Frame height (derived: overall height 112.5 in minus cab height above frame 73.4 in)
0.993 m
Hood width (plan view)
1.08 m
Hood opening height (maximum height from frame rail with the hood open, hood opening angle 65 +/- 5 degrees)
1.842 m

Engine

Engine model
Mack MP8, 13 L in-line 6, direct injection (Pinnacle's engine)
Displacement
13 L
Gross power
415-505 hp (310-377 kW)
Max torque (the Pinnacle page prints 1,560-1,860 lb-ft in its base-configuration table and 1,650-1,900 lb-ft in its engine section)
1,650-1,900 lb-ft (2,237-2,576 Nm)
Bore x stroke
131 mm x 158 mm (5.16 x 6.22 in)
Compression ratio
16:1
Engine brake (engine brake retarding power)
372 kW (500 hp @ 2,100 rpm)
Dry engine weight
1,177 kg
Idle speed
600 rpm low (adjustable), 2,100 rpm high
Clutch engagement torque
1,647 Nm

Transmission

Gearbox
Mack mDRIVE 12-speed automated manual (standard); mDRIVE HD 12, 13 or 14-speed, Allison 4500 RDS 6-speed automatic, Eaton-Fuller 10, 13 or 18-speed manual
Axles
Mack, Meritor or Dana Spicer front and drive axles
Axle configurations
Axle-forward CHU612 (4x2), CHU613 (6x4) and CHU614 (8x6); axle-back CXU612/613/614

Weight

Gross vehicle weight (range 35,000-62,000 lb (15,876-28,123 kg); GCW 80,000 lb and above)
28,123 kg
Gross combination weight (Mack lists 80,000+ lb; kg is the 80,000 lb figure)
36,287 kg
Weight class
Class 8
Front axle rating (CXU603 sheet) (older axle-back Pinnacle spec sheet, Mack FXL12)
5,443 kg
Rear axle rating (CXU603 sheet) (older axle-back Pinnacle spec sheet, Meritor RT40-145)
18,144 kg

Chassis

Cab
Day cab (page lists no sleeper); axle-forward set-forward front axle, tilt hood
Frame rails (CXU603 sheet)
10.47 x 3.54 x 0.24 in steel, 11.6 in3 section modulus, 1,390,000 lb-in resisting bending moment per rail (older axle-back sheet)
Front suspension (CXU603 sheet)
Mack taperleaf 12,000 lb, 2-leaf (older axle-back sheet)
Rear suspension (CXU603 sheet)
Mack Maxlite 40EZ 40,000 lb (older axle-back sheet)

Tyres

Tyres (CXU603 sheet)
295/75R22.5 low profile on 22.5 x 8.25 Alcoa aluminium discs (older axle-back sheet)

Service capacities

Fuel tanks (CXU603 sheet) (older axle-back sheet: 93 gal LH and RH, 26 in diameter aluminium)
704.1 L