Specification sheetIssued 20 November 2026
Liebherr · crawler crane
Liebherr LTR 1100
Liebherr LTR 1100, 100 t telescopic crawler crane (11.5-52 m telescopic boom, Liebherr 4-cyl 129 kW engine, 26 t standard and 32 t maximum superstructure ballast plus 15 t central ballast, 900 mm triple-grouser track pads) per Liebherr's multilingual technical data sheet.
UAEGlobal
- lifting capacity
- 110.2 US tons
- Main boom length (m, fully extended)
- 170 ft 7 in
- tip height
- 272 ft 4 in
- power
- 175 hp
13.5 ft43 ft
Dimensions
- Track gauge, retracted / extended
- 2.6 m / 4.15 m (centre to centre of the tracks)
- Counterweight width
- 11 ft 5 in
- Tail slewing radius (Largest of the three radii on the drawing (4.795 / 4.42 / 4.26 m))
- 15 ft 9 in
Weight
- Operating weight (With 32 t counterweight, 15 t central ballast and 3-sheave hook block; approximate)
- 227,076 lb
- Transport weight, basic machine, 3.5 m wide (With 900 mm triple-grouser crawler carriers)
- 124,341 lb
- Transport weight, basic machine, 3.0 m wide, jack-up (With optional jack-up cylinders, crawler carriers removed)
- 84,878 lb
- Transport weight, basic machine, 3.0 m wide (Crawler carriers removed)
- 82,232 lb
- Crawler carrier weight (each) (9,900 kg with flat track pads; 6.4 m long)
- 21,385 lb
Crane
- Max lifting capacity (At 2.5 m radius, 11.5 m boom, 360 deg, 5.05 m track width, 32 t counterweight and 15 t central ballast)
- 110.2 US tons
- Main boom length (m, fully extended)
- 170 ft 7 in
- Main boom length retracted (m)
- 37 ft 9 in
- Boom sections
- 6 (1 base section + 5 telescopic sections, TELEMATIK rapid-cycle telescoping)
- Max tip height (Maximum hoist height quoted on the data sheet cover)
- 272 ft 4 in
- Max radius (Quoted on the data sheet cover)
- 196 ft 10 in
- Counterweight (Standard superstructure ballast; 6 t additional for 32 t total)
- 28.7 US tons
- Max counterweight
- 35.3 US tons
- Central ballast (Two 7.5 t blocks on the crawler centre section)
- 16.5 US tons
- Swing-away jib K / NZK
- 2.9 m assembly jib; single 10.8 m or double 10.8-19 m; 0 / 20 / 40 deg mechanical, or 0-40 deg hydraulically adjustable (NZK)
- Telescopic boom extension V
- 2 x 7 m
- Boom elevation time
- Approx. 60 s to 82 deg
- Boom extension time
- Approx. 380 s from 11.5 m to 52 m
- Hoist single-line speed
- 0-110 m/min per hoist; 21 mm rope, 205 m, 88 kN pull (2nd hoist optional)
- Slewing speed
- 0-1.5 rpm, 360 deg
- Hook block, 97.7 t (7 sheaves, 12 lines; 90.2 t 700 kg (5 / 11), 59.1 t 500 kg (3 / 7), 26.1 t 450 kg (1 / 3), 8.8 t 250 kg (1 line))
- 2,734 lb
- Lateral inclination tables
- 0.3, 1.5, 2.5 and 4 deg for the telescopic boom and 2.9 m jib
- Boom hoist
- Luffing by 1 differential hydraulic ram with safety check valves
Undercarriage
- Travel speed (0-2.8 km/h; 0-1 km/h in the slow range)
- 1.7 mph
- Gradeability (max)
- 46 % permissible
- Total driving force
- 148,374 lbf
- Ground pressure
- 10.8 t/m2 average at 103 t total weight with 900 mm pads and no jack-up cylinders
- Track pads
- 900 mm triple-grouser pads, maintenance-free tracks; 900 mm flat pads optional
- Travel drive
- Axial piston motor and planetary gear with spring-loaded, hydraulically released brake on each crawler carrier; synchronous, independent and counter-rotating control
- Track width adjustment
- Hydraulic telescoping beams: 3.5 m, 4.3 m or 5.05 m; works on asymmetric track
Engine
- Engine model
- Liebherr 4-cyl diesel, water-cooled; EU 2016/1628 / EPA/CARB / ECE-R.96, ECOmode
- Gross power (Rating basis and rpm not stated)
- 175 hp
- Max torque
- 723 lbf-ft
- Fuel tank
- 192 gal
- Electrical system
- 24 V DC, 2 batteries of 180 Ah each
Hydraulics
- Main pumps
- 2 axial-piston variable-displacement pumps with servo and power control, plus 1 double gear pump; open circuits