Liebherr LTR 1100
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · crawler crane

Liebherr LTR 1100

Liebherr LTR 1100, 100 t telescopic crawler crane (11.5-52 m telescopic boom, Liebherr 4-cyl 129 kW engine, 26 t standard and 32 t maximum superstructure ballast plus 15 t central ballast, 900 mm triple-grouser track pads) per Liebherr's multilingual technical data sheet.

UAEGlobal

lifting capacity
100 t
Main boom length (m, fully extended)
52 m
tip height
83 m
power
129 kW (175 hp)
Liebherr LTR 1100, side view with dimensions (illustration)4.11 m13.1 m
Liebherr LTR 1100, front view (illustration)

Dimensions

Track gauge, retracted / extended
2.6 m / 4.15 m (centre to centre of the tracks)
Counterweight width
3.49 m
Tail slewing radius (Largest of the three radii on the drawing (4.795 / 4.42 / 4.26 m))
4.795 m

Weight

Operating weight (With 32 t counterweight, 15 t central ballast and 3-sheave hook block; approximate)
103,000 kg
Transport weight, basic machine, 3.5 m wide (With 900 mm triple-grouser crawler carriers)
56,400 kg
Transport weight, basic machine, 3.0 m wide, jack-up (With optional jack-up cylinders, crawler carriers removed)
38,500 kg
Transport weight, basic machine, 3.0 m wide (Crawler carriers removed)
37,300 kg
Crawler carrier weight (each) (9,900 kg with flat track pads; 6.4 m long)
9,700 kg

Crane

Max lifting capacity (At 2.5 m radius, 11.5 m boom, 360 deg, 5.05 m track width, 32 t counterweight and 15 t central ballast)
100 t
Main boom length (m, fully extended)
52 m
Main boom length retracted (m)
11.5 m
Boom sections
6 (1 base section + 5 telescopic sections, TELEMATIK rapid-cycle telescoping)
Max tip height (Maximum hoist height quoted on the data sheet cover)
83 m
Max radius (Quoted on the data sheet cover)
60 m
Counterweight (Standard superstructure ballast; 6 t additional for 32 t total)
26 t
Max counterweight
32 t
Central ballast (Two 7.5 t blocks on the crawler centre section)
15 t
Swing-away jib K / NZK
2.9 m assembly jib; single 10.8 m or double 10.8-19 m; 0 / 20 / 40 deg mechanical, or 0-40 deg hydraulically adjustable (NZK)
Telescopic boom extension V
2 x 7 m
Boom elevation time
Approx. 60 s to 82 deg
Boom extension time
Approx. 380 s from 11.5 m to 52 m
Hoist single-line speed
0-110 m/min per hoist; 21 mm rope, 205 m, 88 kN pull (2nd hoist optional)
Slewing speed
0-1.5 rpm, 360 deg
Hook block, 97.7 t (7 sheaves, 12 lines; 90.2 t 700 kg (5 / 11), 59.1 t 500 kg (3 / 7), 26.1 t 450 kg (1 / 3), 8.8 t 250 kg (1 line))
1,240 kg
Lateral inclination tables
0.3, 1.5, 2.5 and 4 deg for the telescopic boom and 2.9 m jib
Boom hoist
Luffing by 1 differential hydraulic ram with safety check valves

Undercarriage

Travel speed (0-2.8 km/h; 0-1 km/h in the slow range)
2.8 km/h
Gradeability (max)
46 % permissible
Total driving force
660 kN
Ground pressure
10.8 t/m2 average at 103 t total weight with 900 mm pads and no jack-up cylinders
Track pads
900 mm triple-grouser pads, maintenance-free tracks; 900 mm flat pads optional
Travel drive
Axial piston motor and planetary gear with spring-loaded, hydraulically released brake on each crawler carrier; synchronous, independent and counter-rotating control
Track width adjustment
Hydraulic telescoping beams: 3.5 m, 4.3 m or 5.05 m; works on asymmetric track

Engine

Engine model
Liebherr 4-cyl diesel, water-cooled; EU 2016/1628 / EPA/CARB / ECE-R.96, ECOmode
Gross power (Rating basis and rpm not stated)
129 kW (175 hp)
Max torque
980 Nm
Fuel tank
727 L
Electrical system
24 V DC, 2 batteries of 180 Ah each

Hydraulics

Main pumps
2 axial-piston variable-displacement pumps with servo and power control, plus 1 double gear pump; open circuits