Specification sheetIssued 20 November 2026
Liebherr · mobile crane
Liebherr LTM 1750-9.1
Liebherr LTM 1750-9.1, 9-axle 800 t all-terrain crane (Liebherr 8-cyl 505 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 16.3-52 m telescopic boom, 204 t maximum counterweight) per Liebherr's multilingual technical data sheet. Letters A-H are those printed on the sheet's on-road dimension drawing (G and H are angles); I-K are assigned here.
Global
- lifting capacity
- 881.8 US tons
- Main boom length (m, fully extended)
- 170.6 ft
- tip height
- 498.7 ft
- power
- 686 hp
13 ft72 ft
9.8 ftDimensions
- Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / 5-6 / 6-7 / 7-8 / 8-9 / rear overhang
- 2.645 / 1.61 / 1.59 / 2.15 / 1.6 / 1.65 / 3.37 / 3.4 / 1.6 / 1.3 m
- Tail slewing radius (With more than 154 t counterweight; 7.56 m with 154 t or less)
- 27.3 ft
- Outrigger span, longitudinal (Jobsite support base)
- 39.4 ft
- Outrigger span, transverse (max) (Rear outriggers; 11.999 m front; part-extended 9.896 / 7.17 / 3.09 m)
- 39.4 ft
- Outrigger pad size
- 610 x 610 mm front, 600 x 600 mm rear
Weight
- Gross vehicle weight (On-road driving, 12 t per axle, with the telescopic boom on the carrier; 98 t at 11 t per axle, 63 t and 58 t in lighter transport configurations)
- 238,099 lb
- Gross vehicle weight, jobsite driving (16 t per axle)
- 308,647 lb
- Axle load, on-road (Per axle, maximum)
- 26,455 lb
- Axle load, jobsite driving (Per axle, maximum)
- 35,274 lb
- Max outrigger reaction (Crane superstructure on the outriggers (213 t))
- 470,525 lbf
Crane
- Max lifting capacity (Maximum capacity stated on the sheet cover)
- 881.8 US tons
- Main boom length (m, fully extended)
- 170.6 ft
- Main boom length retracted (m)
- 53.5 ft
- Boom sections
- 4 (1 base section + 3 telescopic sections)
- Max tip height (Largest hoist height of all boom and jib systems, from the cover of the sheet)
- 498.7 ft
- Max radius (Largest radius of all boom and jib systems, from the cover of the sheet)
- 380.6 ft
- Boom elevation angle
- Up to 86 deg
- Boom elevation time
- Approx. 120 s to 86 deg
- Boom extension time
- Approx. 331-481 s from 16.3 m to 52 m
- Max counterweight (Ground plate 11 t, counterweight frame 23 t, 16 slabs of 10 t, 2 slabs of 5 t; hydraulic ballasting device)
- 224.9 US tons
- Telescopic boom guying Y
- Guying frames with stay ropes, hydraulically tilted for transport (option)
- Telescopic boom extension V2 / V3
- 10 m lattice section (V2) + 2 x 5 m lattice section (V3); eccentric VE with 5 m extension
- Fixed lattice jib F / NZF
- 6-62 m; 0 / 10 / 20 / 40 deg (F) or hydraulic 0-38 deg (NZF)
- Luffing lattice jib N
- 21-91 m
- Hoist 1 single-line speed
- 0-123 m/min; 25 mm rope, 700 m, 142 kN pull
- Hoist 2 single-line speed
- 0-104 m/min; 25 mm rope, 930 m, 142 kN pull
- Hoist 3 single-line speed
- 0-104 m/min; 25 mm rope, 995 m, 142 kN pull (third hoist with luffing block, option)
- Slewing speed
- 0-0.67 rpm, 360 deg
- Hook block, 269 t (11 sheaves, 22 lines; 4.6 t and 3.85 t variants also listed)
- 11,795 lb
- Hook block, 237 t (9 sheaves, 19 lines; 4.2 t and 3.2 t variants also listed)
- 11,464 lb
- Hook block, 193 t (7 sheaves, 15 lines; 3.9 / 3.3 / 2.7 t variants also listed)
- 9,921 lb
- Hook block, 145 t (5 sheaves, 11 lines; 2.75 t and 2 t variants also listed)
- 7,716 lb
- Hook block, 95 t (3 sheaves, 7 lines; 3.2 / 2.6 / 2 t variants also listed)
- 8,378 lb
- Hook block, 42 t (1 sheave, 3 lines; 1 t variant also listed)
- 4,409 lb
- Hook block, 14 t (1 line)
- 1,543 lb
- Crane engine
- Liebherr 6-cyl diesel in the counterweight frame, 300 kW (408 hp), 1,987 Nm, 760 L fuel tank, 46 L AdBlue; 97/68/EC and EPA/CARB
- Crane drive
- Diesel-hydraulic with 5 axial-piston variable pumps, servo control and power regulation
- Hoist gear
- Axial-piston variable motor, drum with planetary gear, spring-loaded holding brake
- Luffing gear
- 2 differential cylinders with safety check valves
- Slewing gear
- 3 axial-piston fixed motors, planetary gears, spring-loaded multi-disc brake; roller-bearing slewing ring
- Crane cab
- Steel cab, tilts back 20 deg
- Crane control
- LICCON2 safe load indicator, 2 self-centring joysticks, foot pedal for telescoping
Chassis
- Number of axles
- 9, all axles steered; axles 2, 3, 5 and 6 with planetary gears (axles 5 and 6 with transverse differential locks, axles 3 and 5 with longitudinal locks)
- Engine model
- Liebherr 8-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96
- Gross power
- 686 hp
- Max torque
- 2,262 lbf·ft
- Fuel tank (Plus 46 L AdBlue)
- 158.5 US gal
- Transmission
- ZF automatic with torque converter and intarder, 12 forward / 2 reverse; transfer case with differential
- Tyres
- 385/95 R 25 (14.00 R 25), 18 single tyres; 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional
- Suspension
- Hydropneumatic with automatic levelling on all axles, hydraulically lockable
- Brakes
- Dual-circuit all-wheel air service brake with discs on all axles and automatic anti-lock, spring-loaded parking brake on axles 3-8, exhaust flap brake, Telma eddy-current brake, intarder
- Steering
- Dual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes
- Top speed (385/95 R 25 tyres; 85 kph with larger tyres)
- 49.7 mph
- Minimum driving speed
- 1.79 km/h (1.95 km/h with larger tyres)
- Gradeability (max)
- 41.8 % theoretical (14.00 R 25); 37.8 % with larger tyres
- Electrical system
- 24 V DC, data-bus technique