Liebherr LTM 1750-9.1
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 1750-9.1

Liebherr LTM 1750-9.1, 9-axle 800 t all-terrain crane (Liebherr 8-cyl 505 kW carrier engine, 385/95 R 25 (14.00 R 25) tyres, 16.3-52 m telescopic boom, 204 t maximum counterweight) per Liebherr's multilingual technical data sheet. Letters A-H are those printed on the sheet's on-road dimension drawing (G and H are angles); I-K are assigned here.

Global

lifting capacity
800 t
Main boom length (m, fully extended)
52 m
tip height
152 m
power
505 kW (686 hp)
Liebherr LTM 1750-9.1, side view with dimensions (illustration)3.95 m22 m
Liebherr LTM 1750-9.1, front view (illustration)3 m

Dimensions

Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / 5-6 / 6-7 / 7-8 / 8-9 / rear overhang
2.645 / 1.61 / 1.59 / 2.15 / 1.6 / 1.65 / 3.37 / 3.4 / 1.6 / 1.3 m
Tail slewing radius (With more than 154 t counterweight; 7.56 m with 154 t or less)
8.33 m
Outrigger span, longitudinal (Jobsite support base)
11.998 m
Outrigger span, transverse (max) (Rear outriggers; 11.999 m front; part-extended 9.896 / 7.17 / 3.09 m)
12.009 m
Outrigger pad size
610 x 610 mm front, 600 x 600 mm rear

Weight

Gross vehicle weight (On-road driving, 12 t per axle, with the telescopic boom on the carrier; 98 t at 11 t per axle, 63 t and 58 t in lighter transport configurations)
108,000 kg
Gross vehicle weight, jobsite driving (16 t per axle)
140,000 kg
Axle load, on-road (Per axle, maximum)
12,000 kg
Axle load, jobsite driving (Per axle, maximum)
16,000 kg
Max outrigger reaction (Crane superstructure on the outriggers (213 t))
2,093 kN

Crane

Max lifting capacity (Maximum capacity stated on the sheet cover)
800 t
Main boom length (m, fully extended)
52 m
Main boom length retracted (m)
16.3 m
Boom sections
4 (1 base section + 3 telescopic sections)
Max tip height (Largest hoist height of all boom and jib systems, from the cover of the sheet)
152 m
Max radius (Largest radius of all boom and jib systems, from the cover of the sheet)
116 m
Boom elevation angle
Up to 86 deg
Boom elevation time
Approx. 120 s to 86 deg
Boom extension time
Approx. 331-481 s from 16.3 m to 52 m
Max counterweight (Ground plate 11 t, counterweight frame 23 t, 16 slabs of 10 t, 2 slabs of 5 t; hydraulic ballasting device)
204 t
Telescopic boom guying Y
Guying frames with stay ropes, hydraulically tilted for transport (option)
Telescopic boom extension V2 / V3
10 m lattice section (V2) + 2 x 5 m lattice section (V3); eccentric VE with 5 m extension
Fixed lattice jib F / NZF
6-62 m; 0 / 10 / 20 / 40 deg (F) or hydraulic 0-38 deg (NZF)
Luffing lattice jib N
21-91 m
Hoist 1 single-line speed
0-123 m/min; 25 mm rope, 700 m, 142 kN pull
Hoist 2 single-line speed
0-104 m/min; 25 mm rope, 930 m, 142 kN pull
Hoist 3 single-line speed
0-104 m/min; 25 mm rope, 995 m, 142 kN pull (third hoist with luffing block, option)
Slewing speed
0-0.67 rpm, 360 deg
Hook block, 269 t (11 sheaves, 22 lines; 4.6 t and 3.85 t variants also listed)
5,350 kg
Hook block, 237 t (9 sheaves, 19 lines; 4.2 t and 3.2 t variants also listed)
5,200 kg
Hook block, 193 t (7 sheaves, 15 lines; 3.9 / 3.3 / 2.7 t variants also listed)
4,500 kg
Hook block, 145 t (5 sheaves, 11 lines; 2.75 t and 2 t variants also listed)
3,500 kg
Hook block, 95 t (3 sheaves, 7 lines; 3.2 / 2.6 / 2 t variants also listed)
3,800 kg
Hook block, 42 t (1 sheave, 3 lines; 1 t variant also listed)
2,000 kg
Hook block, 14 t (1 line)
700 kg
Crane engine
Liebherr 6-cyl diesel in the counterweight frame, 300 kW (408 hp), 1,987 Nm, 760 L fuel tank, 46 L AdBlue; 97/68/EC and EPA/CARB
Crane drive
Diesel-hydraulic with 5 axial-piston variable pumps, servo control and power regulation
Hoist gear
Axial-piston variable motor, drum with planetary gear, spring-loaded holding brake
Luffing gear
2 differential cylinders with safety check valves
Slewing gear
3 axial-piston fixed motors, planetary gears, spring-loaded multi-disc brake; roller-bearing slewing ring
Crane cab
Steel cab, tilts back 20 deg
Crane control
LICCON2 safe load indicator, 2 self-centring joysticks, foot pedal for telescoping

Chassis

Number of axles
9, all axles steered; axles 2, 3, 5 and 6 with planetary gears (axles 5 and 6 with transverse differential locks, axles 3 and 5 with longitudinal locks)
Engine model
Liebherr 8-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96
Gross power
505 kW (686 hp)
Max torque
3,067 Nm
Fuel tank (Plus 46 L AdBlue)
600 L
Transmission
ZF automatic with torque converter and intarder, 12 forward / 2 reverse; transfer case with differential
Tyres
385/95 R 25 (14.00 R 25), 18 single tyres; 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional
Suspension
Hydropneumatic with automatic levelling on all axles, hydraulically lockable
Brakes
Dual-circuit all-wheel air service brake with discs on all axles and automatic anti-lock, spring-loaded parking brake on axles 3-8, exhaust flap brake, Telma eddy-current brake, intarder
Steering
Dual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes
Top speed (385/95 R 25 tyres; 85 kph with larger tyres)
80 km/h
Minimum driving speed
1.79 km/h (1.95 km/h with larger tyres)
Gradeability (max)
41.8 % theoretical (14.00 R 25); 37.8 % with larger tyres
Electrical system
24 V DC, data-bus technique