Specification sheetIssued 20 November 2026
Liebherr · mobile crane
Liebherr LTM 1400-7.1
Liebherr LTM 1400-7.1, 7-axle 400 t all-terrain crane (Liebherr 8-cyl carrier engine, 14.00 R 25 tyres, 15.4-60 m telescopic boom, 100 t basic counterweight, 140 t maximum) per Liebherr's trilingual technical data sheet TD 146.00 (06/2004), Sarens-hosted copy. Later production changed the carrier engine; see conflicts. Letters A-E and the angles are those printed on the sheet's dimension drawing; F-J are assigned here.
UAEGlobal
- lifting capacity
- 440.9 US tons
- Main boom length (m, fully extended)
- 196.9 ft
- power
- 598 hp
13.1 ft60.5 ft
9.8 ftDimensions
- Angle of approach (Dimension alpha on the drawing)
- 11°
- Angle of departure (Smaller of the two rear angles on the drawing (beta1, all tyre sizes); angle beta is 19 deg)
- 11°
- Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / 5-6 / 6-7 / rear overhang
- 2.475 / 1.65 / 3.2 / 1.65 / 2.2 / 1.65 / 1.65 / 2.085 m
- Tail slewing radius (Larger of the two tail radii printed on the drawing (6.6 m and 5.6 m))
- 21.7 ft
- Outrigger span, longitudinal (9.998 m on the opposite side of the carrier)
- 32.7 ft
- Outrigger span, transverse (max) (Part-extended 6.8 m and 6.23 m)
- 31.2 ft
- Outrigger pad size
- 700 x 700 mm
Weight
- Gross vehicle weight (On-road driving, 12 t on each of the 7 axles)
- 185,188 lb
- Axle load, on-road (Per axle)
- 26,455 lb
Crane
- Max lifting capacity (At 3 m radius, 15.4 m boom, 120 t counterweight)
- 440.9 US tons
- Main boom length (m, fully extended)
- 196.9 ft
- Main boom length retracted (m)
- 50.5 ft
- Boom sections
- 5 (1 base section + 4 telescopic sections, TELEMATIK rapid-cycle telescoping)
- Boom elevation angle
- Up to 82 deg
- Boom elevation time
- Approx. 70 s to 82 deg
- Boom extension time
- Approx. 380 s from 15.4 m to 60 m
- Counterweight (Basic counterweight: 1 base slab 15 t, 6 slabs of 10 t, 5 slabs of 5 t; the load charts also list 120 t)
- 110.2 US tons
- Max counterweight (4 additional slabs of 10 t; hydraulic ballasting device)
- 154.3 US tons
- Fixed lattice jib
- 7-56 m, at 0 / 20 / 40 deg
- Luffing lattice jib
- 14-84 m
- Telescopic boom guying
- Guying frames with stay ropes, hydraulically tilted for transport; 5.52 m spacer (bracing)
- Hoist 1 single-line speed
- 0-130 m/min; 25 mm rope, 420 m, 126.4 kN pull
- Hoist 2 single-line speed
- 0-130 m/min; 25 mm rope, 470 m, 126.4 kN pull (second hoist is optional)
- Hoist 3 single-line speed
- 0-150 m/min; 25 mm rope, 775 m, 126.4 kN pull (third hoist for the luffing lattice jib)
- Slewing speed
- 0-1.5 rpm, 360 deg
- Hook block, 238.6 t (11 sheaves, 22 lines)
- 8,157 lb
- Hook block, 201 t (9 sheaves, 18 lines)
- 7,275 lb
- Hook block, 171 t (7 sheaves, 14 lines)
- 5,952 lb
- Hook block, 129.2 t (5 sheaves, 10 lines)
- 5,071 lb
- Hook block, 84.7 t (3 sheaves, 6 lines)
- 3,968 lb
- Hook block, 37.4 t (1 sheave, 3 lines)
- 3,086 lb
- Hook block, 12.5 t (1 line)
- 1,323 lb
- Crane engine
- Liebherr D 926 T-E, 6-cyl, 240 kW (326 hp) at 1,800 min-1, 1,480 Nm at 1,200 min-1, 250 L fuel tank
- Crane drive
- Diesel-hydraulic with 4 axial-piston variable pumps, servo control and power regulation
- Luffing gear
- 2 differential cylinders with safety check valve
- Slewing gear
- Hydraulic motor, planetary gear, slewing pinion, spring-loaded holding brake; three-row roller slewing ring
- Crane control
- LICCON safe load indicator, 2 self-centring joysticks, stepless control of all movements
Chassis
- Number of axles
- 7, all axles steered; axles 1, 3 and 5 driven planetary axles (axle 3 with longitudinal differential); optional 14x8 drive (axle 6 also driven)
- Engine model
- Liebherr D 9408 TI-E, 8-cyl diesel, water-cooled, Euro 3
- Gross power (At 2,100 min-1; ECE-R 24.03 and 2001/27/EC)
- 598 hp
- Max torque (At 1,400 min-1)
- 1,918 lbf·ft
- Fuel tank
- 158.5 US gal
- Transmission
- ZF TC-TRONIC automatic with converter lock-up clutch, 12 forward / 2 reverse; transfer case with differential
- Tyres
- 14.00 R 25, 14 single tyres; 16.00 R 25 optional (20.5 R 25 also listed on the drawing)
- Suspension
- Hydropneumatic with automatic levelling; load equalisation between axle pairs 1+2, 3, 4+5 and 6+7; hydraulically lockable
- Brakes
- Dual-circuit all-wheel air service brake, spring-loaded parking brake on axles 2-7, exhaust flap brake, retarder on the gearbox, Telma eddy-current brake optional
- Steering
- ZF semi-integral dual-circuit power steering with emergency pump on axles 1-3; axles 4-7 electro-hydraulic, locked straight above 30 km/h
- Top speed (14.00 R 25 tyres; 80 kph with 16.00 R 25)
- 46.6 mph
- Gradeability (max)
- 39 % theoretical (14.00 R 25); 36 % with 16.00 R 25
- Electrical system
- 24 V DC, 2 batteries of 170 Ah, data-bus technology