Liebherr LTM 1400-7.1
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 1400-7.1

Liebherr LTM 1400-7.1, 7-axle 400 t all-terrain crane (Liebherr 8-cyl carrier engine, 14.00 R 25 tyres, 15.4-60 m telescopic boom, 100 t basic counterweight, 140 t maximum) per Liebherr's trilingual technical data sheet TD 146.00 (06/2004), Sarens-hosted copy. Later production changed the carrier engine; see conflicts. Letters A-E and the angles are those printed on the sheet's dimension drawing; F-J are assigned here.

UAEGlobal

lifting capacity
400 t
Main boom length (m, fully extended)
60 m
power
440 kW (598 hp)
Liebherr LTM 1400-7.1, side view with dimensions (illustration)4 m18.5 m
Liebherr LTM 1400-7.1, front view (illustration)3 m

Dimensions

Angle of approach (Dimension alpha on the drawing)
11°
Angle of departure (Smaller of the two rear angles on the drawing (beta1, all tyre sizes); angle beta is 19 deg)
11°
Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / 5-6 / 6-7 / rear overhang
2.475 / 1.65 / 3.2 / 1.65 / 2.2 / 1.65 / 1.65 / 2.085 m
Tail slewing radius (Larger of the two tail radii printed on the drawing (6.6 m and 5.6 m))
6.6 m
Outrigger span, longitudinal (9.998 m on the opposite side of the carrier)
9.982 m
Outrigger span, transverse (max) (Part-extended 6.8 m and 6.23 m)
9.5 m
Outrigger pad size
700 x 700 mm

Weight

Gross vehicle weight (On-road driving, 12 t on each of the 7 axles)
84,000 kg
Axle load, on-road (Per axle)
12,000 kg

Crane

Max lifting capacity (At 3 m radius, 15.4 m boom, 120 t counterweight)
400 t
Main boom length (m, fully extended)
60 m
Main boom length retracted (m)
15.4 m
Boom sections
5 (1 base section + 4 telescopic sections, TELEMATIK rapid-cycle telescoping)
Boom elevation angle
Up to 82 deg
Boom elevation time
Approx. 70 s to 82 deg
Boom extension time
Approx. 380 s from 15.4 m to 60 m
Counterweight (Basic counterweight: 1 base slab 15 t, 6 slabs of 10 t, 5 slabs of 5 t; the load charts also list 120 t)
100 t
Max counterweight (4 additional slabs of 10 t; hydraulic ballasting device)
140 t
Fixed lattice jib
7-56 m, at 0 / 20 / 40 deg
Luffing lattice jib
14-84 m
Telescopic boom guying
Guying frames with stay ropes, hydraulically tilted for transport; 5.52 m spacer (bracing)
Hoist 1 single-line speed
0-130 m/min; 25 mm rope, 420 m, 126.4 kN pull
Hoist 2 single-line speed
0-130 m/min; 25 mm rope, 470 m, 126.4 kN pull (second hoist is optional)
Hoist 3 single-line speed
0-150 m/min; 25 mm rope, 775 m, 126.4 kN pull (third hoist for the luffing lattice jib)
Slewing speed
0-1.5 rpm, 360 deg
Hook block, 238.6 t (11 sheaves, 22 lines)
3,700 kg
Hook block, 201 t (9 sheaves, 18 lines)
3,300 kg
Hook block, 171 t (7 sheaves, 14 lines)
2,700 kg
Hook block, 129.2 t (5 sheaves, 10 lines)
2,300 kg
Hook block, 84.7 t (3 sheaves, 6 lines)
1,800 kg
Hook block, 37.4 t (1 sheave, 3 lines)
1,400 kg
Hook block, 12.5 t (1 line)
600 kg
Crane engine
Liebherr D 926 T-E, 6-cyl, 240 kW (326 hp) at 1,800 min-1, 1,480 Nm at 1,200 min-1, 250 L fuel tank
Crane drive
Diesel-hydraulic with 4 axial-piston variable pumps, servo control and power regulation
Luffing gear
2 differential cylinders with safety check valve
Slewing gear
Hydraulic motor, planetary gear, slewing pinion, spring-loaded holding brake; three-row roller slewing ring
Crane control
LICCON safe load indicator, 2 self-centring joysticks, stepless control of all movements

Chassis

Number of axles
7, all axles steered; axles 1, 3 and 5 driven planetary axles (axle 3 with longitudinal differential); optional 14x8 drive (axle 6 also driven)
Engine model
Liebherr D 9408 TI-E, 8-cyl diesel, water-cooled, Euro 3
Gross power (At 2,100 min-1; ECE-R 24.03 and 2001/27/EC)
440 kW (598 hp)
Max torque (At 1,400 min-1)
2,600 Nm
Fuel tank
600 L
Transmission
ZF TC-TRONIC automatic with converter lock-up clutch, 12 forward / 2 reverse; transfer case with differential
Tyres
14.00 R 25, 14 single tyres; 16.00 R 25 optional (20.5 R 25 also listed on the drawing)
Suspension
Hydropneumatic with automatic levelling; load equalisation between axle pairs 1+2, 3, 4+5 and 6+7; hydraulically lockable
Brakes
Dual-circuit all-wheel air service brake, spring-loaded parking brake on axles 2-7, exhaust flap brake, retarder on the gearbox, Telma eddy-current brake optional
Steering
ZF semi-integral dual-circuit power steering with emergency pump on axles 1-3; axles 4-7 electro-hydraulic, locked straight above 30 km/h
Top speed (14.00 R 25 tyres; 80 kph with 16.00 R 25)
75 km/h
Gradeability (max)
39 % theoretical (14.00 R 25); 36 % with 16.00 R 25
Electrical system
24 V DC, 2 batteries of 170 Ah, data-bus technology