Liebherr LTM 1300-6.2
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 1300-6.2

Liebherr LTM 1300-6.2, 6-axle 300 t all-terrain crane (Liebherr 8-cyl 455 kW carrier engine with ZF torque-converter transmission, 385/95 R 25 (14.00 R 25) tyres, 14.7-78 m telescopic boom, 56 t basic counterweight, 96 t maximum) per Liebherr's multilingual technical data sheet. Letters A-F, H, I, K and L are those printed on the sheet's dimension drawing; M-O are assigned here.

UAEGlobal

lifting capacity
330.7 US tons
Main boom length (m, fully extended)
255.9 ft
tip height
374 ft
power
619 hp
Liebherr LTM 1300-6.2, side view with dimensions (illustration)13 ft57.3 ft
Liebherr LTM 1300-6.2, front view (illustration)9.8 ft

Dimensions

Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / 5-6 / rear overhang
2.54 / 1.65 / 3.1 / 1.65 / 2.44 / 1.65 / 2.408 m
Tail slewing radius (Larger of the two tail radii printed on the drawing (5.6 m and 5.02 m))
18.4 ft
Outrigger span, longitudinal (8.932 m on the opposite side of the carrier)
29.3 ft
Outrigger span, transverse (max) (Part-extended 7.46 / 7.065 / 5.6 m; 2.668 m minimum with the optional VarioBase)
28 ft
Outrigger pad size
600 x 600 mm
Angle of departure (Smallest of the rear angles on the drawing (H, 14.00 R 25 tyres; 9 deg with larger tyres); angles I and K are 9 and 14 deg)
8°

Weight

Gross vehicle weight (On-road driving, 12 t per axle; 40 t (6.5 t per axle) with the lightest configuration)
158,733 lb
Gross vehicle weight, jobsite driving (Up to 16.5 t per axle with counterweight carried)
211,644 lb
Axle load, on-road (Per axle, maximum)
26,455 lb
Axle load, jobsite driving (Per axle, maximum)
36,376 lb
Max outrigger reaction (Crane superstructure on the outriggers; 1,094 kN (112 t) on the smaller support)
304,167 lbf

Crane

Max lifting capacity (Maximum capacity stated on the sheet cover)
330.7 US tons
Main boom length (m, fully extended)
255.9 ft
Main boom length retracted (m)
48.2 ft
Boom sections
7 (1 base section + 6 telescopic sections, TELEMATIK rapid-cycle telescoping)
Max tip height (Largest hoist height of all boom and jib systems, from the cover of the sheet)
374 ft
Max radius (Largest radius of all boom and jib systems, from the cover of the sheet)
308.4 ft
Boom elevation angle
Up to 82 deg
Boom elevation time
Approx. 80 s to 82 deg
Boom extension time
Approx. 818 s from 14.7 m to 78 m
Counterweight (Basic counterweight)
61.7 US tons
Max counterweight (40 t additional counterweight (4 slabs of 10 t))
105.8 US tons
Swing-away jib K / NZK
12.5-35 m; 0 / 20 / 40 deg mechanical (K) or 0-40 deg hydraulic (NZK); 5.5 m integrated assembly jib optional
Fixed lattice jib F
14-42 m, 0 / 20 / 40 deg
Luffing lattice jib N
17.5-70 m
Hoist 1 single-line speed
0-130 m/min; 23 mm rope, 300 m, 122 kN pull
Hoist 2 single-line speed
0-127 m/min; 23 mm rope, 465 m, 122 kN pull (second hoist is optional)
Slewing speed
0-1.6 rpm, 360 deg
Hook block, 183 t (12 sheaves, 17 lines)
7,496 lb
Hook block, 135.5 t (7 sheaves, 12 lines)
3,748 lb
Hook block, 125 t (5 sheaves, 11 lines)
3,527 lb
Hook block, 80 t (3 sheaves, 7 lines)
3,197 lb
Hook block, 36.2 t (1 sheave, 3 lines)
2,205 lb
Hook block, 12.2 t (1 line)
1,102 lb
Crane drive
Mechanical drive of the crane hydraulics from the carrier engine; variable axial-piston pumps with servo control and power regulation
Hoist gear
Axial-piston variable motor, drum with planetary gear, spring-loaded holding brake, closed circuit
Luffing gear
1 differential cylinder with non-return valve
Slewing gear
Axial-piston fixed motor, planetary gear, spring-loaded holding brake, closed circuit; triple-roller slewing ring
Crane cab
Safety glazing, tilts back 20 deg
Crane control
LICCON2 safe load indicator, 2 self-centring joysticks, pedal switches for telescoping

Chassis

Number of axles
6, all axles steered; axles 1, 3 and 5 with planetary gears; optional 12x8 drive (axle 4 also driven)
Engine model
Liebherr 8-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane
Gross power
619 hp
Max torque
2,263 lbf·ft
Fuel tank
211.3 US gal
Transmission
ZF automatic with torque converter and intarder, 12 forward / 2 reverse; transfer case with differential
Tyres
385/95 R 25 (14.00 R 25), 12 tyres; 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional
Suspension
Hydropneumatic with automatic levelling on all axles, hydraulically lockable
Brakes
Dual-circuit all-wheel air service brake with discs on all axles, spring-loaded parking brake on axles 2-6, exhaust flap brake, intarder, Telma eddy-current brake optional
Steering
Dual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes
Top speed (385/95 R 25 tyres; 85 kph with larger tyres)
49.7 mph
Minimum driving speed
1.95 km/h (2.13 km/h with larger tyres)
Gradeability (max)
56.9 % theoretical (14.00 R 25); 50.7 % with larger tyres
Electrical system
24 V DC, data-bus technique