Liebherr LTM 1300-6.2
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 1300-6.2

Liebherr LTM 1300-6.2, 6-axle 300 t all-terrain crane (Liebherr 8-cyl 455 kW carrier engine with ZF torque-converter transmission, 385/95 R 25 (14.00 R 25) tyres, 14.7-78 m telescopic boom, 56 t basic counterweight, 96 t maximum) per Liebherr's multilingual technical data sheet. Letters A-F, H, I, K and L are those printed on the sheet's dimension drawing; M-O are assigned here.

UAEGlobal

lifting capacity
300 t
Main boom length (m, fully extended)
78 m
tip height
114 m
power
455 kW (619 hp)
Liebherr LTM 1300-6.2, side view with dimensions (illustration)3.95 m17.5 m
Liebherr LTM 1300-6.2, front view (illustration)3 m

Dimensions

Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / 5-6 / rear overhang
2.54 / 1.65 / 3.1 / 1.65 / 2.44 / 1.65 / 2.408 m
Tail slewing radius (Larger of the two tail radii printed on the drawing (5.6 m and 5.02 m))
5.6 m
Outrigger span, longitudinal (8.932 m on the opposite side of the carrier)
8.916 m
Outrigger span, transverse (max) (Part-extended 7.46 / 7.065 / 5.6 m; 2.668 m minimum with the optional VarioBase)
8.532 m
Outrigger pad size
600 x 600 mm
Angle of departure (Smallest of the rear angles on the drawing (H, 14.00 R 25 tyres; 9 deg with larger tyres); angles I and K are 9 and 14 deg)
8°

Weight

Gross vehicle weight (On-road driving, 12 t per axle; 40 t (6.5 t per axle) with the lightest configuration)
72,000 kg
Gross vehicle weight, jobsite driving (Up to 16.5 t per axle with counterweight carried)
96,000 kg
Axle load, on-road (Per axle, maximum)
12,000 kg
Axle load, jobsite driving (Per axle, maximum)
16,500 kg
Max outrigger reaction (Crane superstructure on the outriggers; 1,094 kN (112 t) on the smaller support)
1,353 kN

Crane

Max lifting capacity (Maximum capacity stated on the sheet cover)
300 t
Main boom length (m, fully extended)
78 m
Main boom length retracted (m)
14.7 m
Boom sections
7 (1 base section + 6 telescopic sections, TELEMATIK rapid-cycle telescoping)
Max tip height (Largest hoist height of all boom and jib systems, from the cover of the sheet)
114 m
Max radius (Largest radius of all boom and jib systems, from the cover of the sheet)
94 m
Boom elevation angle
Up to 82 deg
Boom elevation time
Approx. 80 s to 82 deg
Boom extension time
Approx. 818 s from 14.7 m to 78 m
Counterweight (Basic counterweight)
56 t
Max counterweight (40 t additional counterweight (4 slabs of 10 t))
96 t
Swing-away jib K / NZK
12.5-35 m; 0 / 20 / 40 deg mechanical (K) or 0-40 deg hydraulic (NZK); 5.5 m integrated assembly jib optional
Fixed lattice jib F
14-42 m, 0 / 20 / 40 deg
Luffing lattice jib N
17.5-70 m
Hoist 1 single-line speed
0-130 m/min; 23 mm rope, 300 m, 122 kN pull
Hoist 2 single-line speed
0-127 m/min; 23 mm rope, 465 m, 122 kN pull (second hoist is optional)
Slewing speed
0-1.6 rpm, 360 deg
Hook block, 183 t (12 sheaves, 17 lines)
3,400 kg
Hook block, 135.5 t (7 sheaves, 12 lines)
1,700 kg
Hook block, 125 t (5 sheaves, 11 lines)
1,600 kg
Hook block, 80 t (3 sheaves, 7 lines)
1,450 kg
Hook block, 36.2 t (1 sheave, 3 lines)
1,000 kg
Hook block, 12.2 t (1 line)
500 kg
Crane drive
Mechanical drive of the crane hydraulics from the carrier engine; variable axial-piston pumps with servo control and power regulation
Hoist gear
Axial-piston variable motor, drum with planetary gear, spring-loaded holding brake, closed circuit
Luffing gear
1 differential cylinder with non-return valve
Slewing gear
Axial-piston fixed motor, planetary gear, spring-loaded holding brake, closed circuit; triple-roller slewing ring
Crane cab
Safety glazing, tilts back 20 deg
Crane control
LICCON2 safe load indicator, 2 self-centring joysticks, pedal switches for telescoping

Chassis

Number of axles
6, all axles steered; axles 1, 3 and 5 with planetary gears; optional 12x8 drive (axle 4 also driven)
Engine model
Liebherr 8-cyl diesel, water-cooled, EU 2016/1628 / EPA/CARB / ECE-R.96; single engine also drives the crane
Gross power
455 kW (619 hp)
Max torque
3,068 Nm
Fuel tank
800 L
Transmission
ZF automatic with torque converter and intarder, 12 forward / 2 reverse; transfer case with differential
Tyres
385/95 R 25 (14.00 R 25), 12 tyres; 445/95 R 25 (16.00 R 25) or 525/80 R 25 (20.5 R 25) optional
Suspension
Hydropneumatic with automatic levelling on all axles, hydraulically lockable
Brakes
Dual-circuit all-wheel air service brake with discs on all axles, spring-loaded parking brake on axles 2-6, exhaust flap brake, intarder, Telma eddy-current brake optional
Steering
Dual-circuit hydraulic power steering with active speed-dependent rear-axle steering and special steering programmes
Top speed (385/95 R 25 tyres; 85 kph with larger tyres)
80 km/h
Minimum driving speed
1.95 km/h (2.13 km/h with larger tyres)
Gradeability (max)
56.9 % theoretical (14.00 R 25); 50.7 % with larger tyres
Electrical system
24 V DC, data-bus technique