Specification sheetIssued 20 November 2026
Liebherr · mobile crane
Liebherr LTM 11200-9.1
Liebherr LTM 11200-9.1, 9-axle 1,200 t all-terrain crane (385/95 R 25 tyres, 202 t counterweight, 100 m telescopic boom in variant 2 and 55 m in variant 1) per Liebherr's multilingual Technical Data sheet TD 178.05 (12/2011, metric) and Liebherr's English brochure (07/2017). Letters A-C are those on the sheet's support-base table; letters D-J are assigned here to the other dimensions on the drawing.
UAEGlobal
- lifting capacity
- 1,322.8 US tons
- Main boom length (m, fully extended)
- 328.1 ft
- tip height
- 616.8 ft
- power
- 680 hp
13.1 ft65.4 ft
9.8 ftDimensions
- Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / 5-6 / 6-7 / 7-8 / 8-9 / rear overhang
- 2.595 / 1.48 / 2.08 / 1.5 / 1.48 / 3.07 / 1.5 / 3.3 / 1.48 / 1.46 m
- Angle of approach
- 11°
- Angle of departure
- 20°
- Outrigger pad size
- 1,000 x 1,000 mm
- Outrigger cylinder stroke
- 2.5 ft
- Telescopic boom transport weight (T7, 100 m) (without boom lifting unit; 79.6 t with it; includes supporting brackets)
- 82.6 US tons
- Telescopic boom transport weight (T7Y, 100 m) (with Y-guying, without lifting unit; 104.4 t with it)
- 109.9 US tons
- Telescopic boom transport weight (T3, 55 m) (without T3 adapter and head, without lifting unit; 58.5 t with adapter and head; 56.8 / 63.2 t with lifting unit)
- 57.4 US tons
- Telescopic boom transport weight (T3Y, 55 m) (without T3 adapter and head; 83.3 t with them)
- 84.9 US tons
Weight
- Gross vehicle weight (vehicle without telescopic boom, 12 t on each axle; below 100 t without winches, below 76 t also without swing-out beams)
- 238,099 lb
- Axle load (per axle on road)
- 26,455 lb
- Hook block weights
- 363 t block: 13 sheaves, 27 lines; 320 t: 11 sheaves, 23 lines; 227 t: 7 sheaves, 15 lines; 112 t: 3 sheaves, 7 lines; 50 t: 1 sheave, 3 lines; 16 t: 1 line
Crane
- Max lifting capacity (at 2.5 m radius, 31.6 m boom of the 55 m telescopic boom with Y-guying (T3Y), 202 t counterweight, over 360 deg, maximum support base)
- 1,322.8 US tons
- Main boom length (m, fully extended) (variant 2, 18.3 to 100 m with T7 head (213 t); with the 22 m telescopic boom extension)
- 328.1 ft
- Main boom length retracted (m) (variant 2)
- 60 ft
- Main boom length (variant 1, fully extended) (19.9 to 55 m including T3 adapter and head (363 t))
- 180.4 ft
- Boom sections
- All telescopic sections extend separately through the TELEMATIK quick-cycle system
- Boom elevation angle
- Up to 86 deg
- Max tip height (stated on the brochure cover, without the configuration)
- 616.8 ft
- Max radius (stated on the brochure cover, without the configuration)
- 446.2 ft
- Counterweight (base plate 22 t, 16 plates of 10 t, 4 plates of 5 t; hydraulic ballasting, no auxiliary crane needed)
- 222.7 US tons
- Telescopic boom extension
- 22 m: 10 m (V2) and 6 m (V3) lattice pieces, plus 6 m eccentric VE
- Y-guying system
- Guying frame with 2 rope winches on the 55 m or 100 m telescopic boom, folds down for transport
- Fixed lattice jib
- 6.5 to 60.5 m (F); NZF hydraulically adjustable from 0 to 60 deg (option)
- Luffing lattice jib
- 18 to 126 m (N)
- Lifting capacity, 100 m boom with Y-guying (T7Y) (brochure figure; the 12/2011 load chart gives 62 t at 18 m radius and 4.1 t at 92 m)
- 71.7 US tons
- Lifting capacity, 55 m boom with Y-guying (T3Y), at 7 m radius (55 m boom, 202 t counterweight; 35.5 t at 50 m radius)
- 312 US tons
- Lifting capacity, 100 m boom (T7), at 12 m radius (202 t counterweight; 1.4 t at 76 m radius)
- 27.8 US tons
- Hoist 1 single-line speed
- 0-110 m/min; 28 mm rope, 600 m, 167 kN pull
- Hoist 2 single-line speed
- 0-130 m/min; 28 mm rope, 940 m, 167 kN pull
- Hoist 3 single-line speed
- 0-120 m/min; 28 mm rope, 950 m, 213 kN pull
- Slewing speed
- 0-0.84 rpm, 360 deg
- Boom elevation time
- Approx. 130 s to 86 deg
- Boom extension time
- Approx. 430 s (55 m boom) / 1,120 s (100 m boom)
- Crane engine (the 12/2011 data sheet gives 300 kW (408 hp) and 1,987 Nm)
- Liebherr 6-cylinder turbo diesel, 270 kW (367 hp), 1,720 Nm, 300 L fuel tank
- Crane drive
- Diesel-hydraulic; closed-circuit variable axial-piston pumps for hoisting, slewing and luffing jib, open-circuit pumps for luffing and telescoping
- Luffing gear
- 2 differential cylinders with non-return valves
- Slewing gear
- 2 slewing gears, each hydraulic motor, planetary gear and spring-applied holding brake; 3-row roller slewing ring
- Crane cab
- Fibre composite, large field of view, height-adjustable, tilts back (20 deg per brochure) and lowers hydraulically for entry
- Crane control
- LICCON computer system with integrated load moment limiter, two 4-axis hand controllers
Chassis
- Number of axles
- 9 (all axles sprung and steered; axles 1, 2, 4 and 5 driven)
- Engine model
- Liebherr 8-cylinder turbo diesel, 97/68/EC and EPA/CARB
- Gross power (at the brochure rating of 680 hp; the 12/2011 data sheet gives 505 kW (686 hp))
- 680 hp
- Max torque (the 12/2011 data sheet gives 3,068 Nm)
- 2,213 lbf·ft
- Fuel tank
- 158.5 US gal
- Transmission
- ZF TC-TRONIC automatic with torque converter and intarder, 12 forward / 2 reverse, two-stage transfer case with lockable differential
- Tyres
- 385/95 R 25 (14.00 R 25), 18 tyres, singles
- Suspension
- Hydropneumatic Niveaumatik with automatic levelling, spring travel +175/-125 mm, lockable; load equalisation between axle pairs
- Brakes
- Dual-circuit air-operated disc brakes on all axles, exhaust brake, Telma eddy-current brake and intarder
- Top speed
- 49.7 mph
- Gradeability (max)
- 38 % (theoretical)
- Steering
- ZF hydraulic dual-circuit steering on axles 1-5; axles 6-9 electro-hydraulic, speed-dependent active rear-axle steering; 5 steering programmes
- Electrical system
- 24 V, 2 batteries of 180 Ah