Liebherr LTM 11200-9.1
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · mobile crane

Liebherr LTM 11200-9.1

Liebherr LTM 11200-9.1, 9-axle 1,200 t all-terrain crane (385/95 R 25 tyres, 202 t counterweight, 100 m telescopic boom in variant 2 and 55 m in variant 1) per Liebherr's multilingual Technical Data sheet TD 178.05 (12/2011, metric) and Liebherr's English brochure (07/2017). Letters A-C are those on the sheet's support-base table; letters D-J are assigned here to the other dimensions on the drawing.

UAEGlobal

lifting capacity
1,200 t
Main boom length (m, fully extended)
100 m
tip height
188 m
power
500 kW (680 hp)
Liebherr LTM 11200-9.1, side view with dimensions (illustration)4 m19.9 m
Liebherr LTM 11200-9.1, front view (illustration)3 m

Dimensions

Axle spacing, bumper-1 / 1-2 / 2-3 / 3-4 / 4-5 / 5-6 / 6-7 / 7-8 / 8-9 / rear overhang
2.595 / 1.48 / 2.08 / 1.5 / 1.48 / 3.07 / 1.5 / 3.3 / 1.48 / 1.46 m
Angle of approach
11°
Angle of departure
20°
Outrigger pad size
1,000 x 1,000 mm
Outrigger cylinder stroke
0.75 m
Telescopic boom transport weight (T7, 100 m) (without boom lifting unit; 79.6 t with it; includes supporting brackets)
74.9 t
Telescopic boom transport weight (T7Y, 100 m) (with Y-guying, without lifting unit; 104.4 t with it)
99.7 t
Telescopic boom transport weight (T3, 55 m) (without T3 adapter and head, without lifting unit; 58.5 t with adapter and head; 56.8 / 63.2 t with lifting unit)
52.1 t
Telescopic boom transport weight (T3Y, 55 m) (without T3 adapter and head; 83.3 t with them)
77 t

Weight

Gross vehicle weight (vehicle without telescopic boom, 12 t on each axle; below 100 t without winches, below 76 t also without swing-out beams)
108,000 kg
Axle load (per axle on road)
12,000 kg
Hook block weights
363 t block: 13 sheaves, 27 lines; 320 t: 11 sheaves, 23 lines; 227 t: 7 sheaves, 15 lines; 112 t: 3 sheaves, 7 lines; 50 t: 1 sheave, 3 lines; 16 t: 1 line

Crane

Max lifting capacity (at 2.5 m radius, 31.6 m boom of the 55 m telescopic boom with Y-guying (T3Y), 202 t counterweight, over 360 deg, maximum support base)
1,200 t
Main boom length (m, fully extended) (variant 2, 18.3 to 100 m with T7 head (213 t); with the 22 m telescopic boom extension)
100 m
Main boom length retracted (m) (variant 2)
18.3 m
Main boom length (variant 1, fully extended) (19.9 to 55 m including T3 adapter and head (363 t))
55 m
Boom sections
All telescopic sections extend separately through the TELEMATIK quick-cycle system
Boom elevation angle
Up to 86 deg
Max tip height (stated on the brochure cover, without the configuration)
188 m
Max radius (stated on the brochure cover, without the configuration)
136 m
Counterweight (base plate 22 t, 16 plates of 10 t, 4 plates of 5 t; hydraulic ballasting, no auxiliary crane needed)
202 t
Telescopic boom extension
22 m: 10 m (V2) and 6 m (V3) lattice pieces, plus 6 m eccentric VE
Y-guying system
Guying frame with 2 rope winches on the 55 m or 100 m telescopic boom, folds down for transport
Fixed lattice jib
6.5 to 60.5 m (F); NZF hydraulically adjustable from 0 to 60 deg (option)
Luffing lattice jib
18 to 126 m (N)
Lifting capacity, 100 m boom with Y-guying (T7Y) (brochure figure; the 12/2011 load chart gives 62 t at 18 m radius and 4.1 t at 92 m)
65 t
Lifting capacity, 55 m boom with Y-guying (T3Y), at 7 m radius (55 m boom, 202 t counterweight; 35.5 t at 50 m radius)
283 t
Lifting capacity, 100 m boom (T7), at 12 m radius (202 t counterweight; 1.4 t at 76 m radius)
25.2 t
Hoist 1 single-line speed
0-110 m/min; 28 mm rope, 600 m, 167 kN pull
Hoist 2 single-line speed
0-130 m/min; 28 mm rope, 940 m, 167 kN pull
Hoist 3 single-line speed
0-120 m/min; 28 mm rope, 950 m, 213 kN pull
Slewing speed
0-0.84 rpm, 360 deg
Boom elevation time
Approx. 130 s to 86 deg
Boom extension time
Approx. 430 s (55 m boom) / 1,120 s (100 m boom)
Crane engine (the 12/2011 data sheet gives 300 kW (408 hp) and 1,987 Nm)
Liebherr 6-cylinder turbo diesel, 270 kW (367 hp), 1,720 Nm, 300 L fuel tank
Crane drive
Diesel-hydraulic; closed-circuit variable axial-piston pumps for hoisting, slewing and luffing jib, open-circuit pumps for luffing and telescoping
Luffing gear
2 differential cylinders with non-return valves
Slewing gear
2 slewing gears, each hydraulic motor, planetary gear and spring-applied holding brake; 3-row roller slewing ring
Crane cab
Fibre composite, large field of view, height-adjustable, tilts back (20 deg per brochure) and lowers hydraulically for entry
Crane control
LICCON computer system with integrated load moment limiter, two 4-axis hand controllers

Chassis

Number of axles
9 (all axles sprung and steered; axles 1, 2, 4 and 5 driven)
Engine model
Liebherr 8-cylinder turbo diesel, 97/68/EC and EPA/CARB
Gross power (at the brochure rating of 680 hp; the 12/2011 data sheet gives 505 kW (686 hp))
500 kW (680 hp)
Max torque (the 12/2011 data sheet gives 3,068 Nm)
3,000 Nm
Fuel tank
600 L
Transmission
ZF TC-TRONIC automatic with torque converter and intarder, 12 forward / 2 reverse, two-stage transfer case with lockable differential
Tyres
385/95 R 25 (14.00 R 25), 18 tyres, singles
Suspension
Hydropneumatic Niveaumatik with automatic levelling, spring travel +175/-125 mm, lockable; load equalisation between axle pairs
Brakes
Dual-circuit air-operated disc brakes on all axles, exhaust brake, Telma eddy-current brake and intarder
Top speed
80 km/h
Gradeability (max)
38 % (theoretical)
Steering
ZF hydraulic dual-circuit steering on axles 1-5; axles 6-9 electro-hydraulic, speed-dependent active rear-axle steering; 5 steering programmes
Electrical system
24 V, 2 batteries of 180 Ah