Liebherr HS 895 HD
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Liebherr · crawler crane

Liebherr HS 895 HD

Liebherr HS 895 HD duty cycle crawler crane (MAN D 2842 LE engine, HD undercarriage with 1100 mm track pads, 55.1 t basic counterweight, main boom 20-84.2 m) per Liebherr's metric technical data sheet 10099249 (03/2011); later-generation HS 8xx models are not covered. Letters on the drawing are ours, because the maker's drawing is unlettered.

Global

lifting capacity
220.5 US tons
Main boom length (m, fully extended)
276 ft 3 in
power
898 hp
Liebherr HS 895 HD, side view with dimensions (illustration)13 ft57 ft
Liebherr HS 895 HD, front view (illustration)

Dimensions

Transport width, base machine (Base machine with A-frame and winches, without crawlers, boom foot and counterweight)
11 ft 6 in

Weight

Operating weight (Base machine with HD undercarriage, two 350 kN main winches with 150 m rope, 20 m main boom (boom foot 7 m, head 7 m, section 6 m), 55.1 t basic counterweight, 1100 mm pads, 60 t hook block)
379,636 lb
Counterweight (Basic counterweight; 75.1 t counterweight plus 27 t carbody counterweight is the heavy configuration (200 t chart))
121,475 lb
Transport weight, base machine (With A-frame, two 350 kN winches with 150 m rope and jack-up system (1.7 t); without crawlers, boom foot and counterweights)
133,820 lb
Crawler weight (each) (1100 mm track pads, transport width 1,450 mm)
56,240 lb
Boom foot weight (Including pendants)
8,201 lb
Boom head weight (Including pendants, polyamide sheaves)
9,370 lb
Boom section weight, 11.7 m (3 m section 1,030 kg; 6 m section 1,630 kg)
5,247 lb
Ground pressure
0.98 kg/cm2

Crane

Max lifting capacity (At 5 m radius with 75.1 t counterweight and 27 t carbody counterweight (350 kN winches); 175.5 t at 4.9 m with the 55.1 t counterweight)
220.5 US tons
Main boom length (m, fully extended) (Lengths over 75.5 m need the additional counterweight for self-erection)
276 ft 3 in
Main boom length retracted (m) (Shortest main boom: boom foot 7 m, section 6 m, head 7 m)
65 ft 7 in
Fixed jib
11 m to 26 m (No. 1008)
Auxiliary jib capacity (Auxiliary jib on the boom head, load chart programmed in the LMI)
38.6 US tons
Boom elevation angle
15 to 86 deg
Boom hoist
Max 150 kN line pull, 24 mm rope; boom up from 15 to 86 deg in 160 s
Main winches
2 x 350 kN line pull, 36 mm rope, 830 mm drum, 46.9 m rope on first layer
Hoist line speed (max)
0-77 m/min; 0-157 m/min with the change gearbox
Duty cycle line pull (Two-rope lifting is allowed only when neither winch is overloaded)
30 t on one rope, 49.2 t on two ropes (36 mm rope, minimum breaking load 1,186 kN)
Auxiliary and tagline winches
Auxiliary winch 70 kN in the boom foot; tagline winch 70 kN or 30 kN with free fall (options)
Slewing speed
0-3.6 rpm, continuously variable, three speed ranges; second swing drive standard, third optional
Hook block weights
120 t (2 sheaves) 1,400 kg; 200 t (3 sheaves) 2,600 kg; 35 t single hook 400 to 1,200 kg
Casing oscillator operation
Drilling diameter up to 3,300 mm, max chisel weight 18 t; hydraulic supply 2 x 350 L/min at 300 bar
Dynamic compaction capacity
40 t at 9 m radius with booms 25.7-37.4 m (38 t with 43.4 m), not above 75 % of tipping load, lift height up to 30 m

Undercarriage

Travel speed (2nd gear; 0.75 km/h in 1st gear)
0.9 mph
Track shoes
1100 mm track pads, maintenance-free tracks, hydraulic chain tensioning
Travel drive
Axial piston motor with spring-loaded multi-disc brake; hydraulically adjustable track gauge

Engine

Engine model
MAN D 2842 LE; complies with NRMM EPA / CARB Tier 2
Gross power (ISO 3046 rating at 1,900 rpm)
898 hp
Fuel tank (With continuous level indicator and reserve warning)
251 gal

Hydraulics

Main pumps
Axial piston pumps in closed and open circuits with flow control on demand
Max working pressure
5,076 psi
Hydraulic tank capacity
359 gal