Specification sheetIssued 20 November 2026
Komatsu · excavator
Komatsu PC300LC-8M0
Komatsu PC300LC-8M0 (long undercarriage, 6470 mm one-piece boom, 3185 mm arm, 700 mm triple-grouser shoes, 1.40 m3 ISO heaped bucket; U.S. EPA Tier 3 / EU Stage 3A equivalent engine) from Komatsu's PC300/LC-8M0 brochure EENSB12600 (March 2022). Komatsu Middle East lists the standard-track PC300-8M0; its figures differ only in the undercarriage rows noted below.
UAEGlobal
- digging depth
- 24.2 ft
- power
- 250 HP
- Operating weight
- 70,990 lb
- Bucket capacity
- 1.83 yd³
10.3 ft13.2 ft36.5 ft
10.8 ftWeight
- Operating weight (PC300LC-8M0 with 700 mm shoes; includes 6470 mm boom, 3185 mm arm, 1.40 m3 ISO 7451 heaped bucket, full fuel tank, operator and standard equipment)
- 70,990 lb
- Operating weight, 600 mm shoes (PC300LC-8M0; 31,100 kg for PC300-8M0)
- 69,666 lb
- Operating weight, 800 mm shoes (PC300LC-8M0; 32,010 kg for PC300-8M0)
- 71,827 lb
- Ground pressure (PC300LC-8M0, 700 mm shoes; 59.0 kPa with 600 mm and 45.7 kPa with 800 mm shoes)
- 51.6 kPa (0.53 kgf/cm2)
Performance
- Bucket capacity (ISO 7451 heaped, with 3185 mm arm; Komatsu lists 0.52 - 1.80 m3 across the range (p.1))
- 1.83 yd³
- Bucket digging force (SAE J1179 rating at power max, 3185 mm arm; 228 kN with 2220 / 2550 mm arms)
- 44,962 lbf
- Arm digging force (SAE J1179 rating at power max, 3185 mm arm; 225 / 193 / 139 kN with 2220 / 2550 / 4020 mm arms)
- 37,093 lbf
- Bucket digging force (ISO 6015, power max) (ISO 6015 rating at power max, 3185 mm arm; 259 kN with 2220 / 2550 mm arms)
- 51,032 lbf
- Arm digging force (ISO 6015, power max) (ISO 6015 rating at power max, 3185 mm arm)
- 38,442 lbf
- Swing speed
- 9.5 rpm
- Travel speed (high) (Auto-shift; mid 4.5 km/h, low 3.2 km/h)
- 3.4 mph
- Travel speed (low) (Auto-shift low)
- 2.0 mph
- Max drawbar pull (26,900 kgf)
- 59,350 lbf
- Gradeability (70%)
- 35°
- AMax digging height (With 6470 mm boom and 3185 mm arm)
- 33.1 ft
- BMax dumping height
- 23.1 ft
- CMax digging depth
- 24.2 ft
- DMax vertical wall digging depth
- 21 ft
- EMax depth cut for 2,440 mm level bottom
- 23.6 ft
- FMax digging reach
- 36.4 ft
- GMax reach at ground level
- 35.8 ft
- HMin swing radius
- 14.1 ft
Engine
- Engine model
- Komatsu SAA6D114E-3
- Type
- Water-cooled, 4-cycle, direct injection
- Aspiration
- Turbocharged, aftercooled
- Emissions
- U.S. EPA Tier 3 and EU Stage 3A emissions equivalent
- Cylinders
- 6
- Bore
- 0.4 ft
- Stroke
- 0.4 ft
- Displacement
- 2.2 US gal
- Gross power (SAE J1995, at 1,950 rpm)
- 260 HP
- Net power (ISO 9249 / SAE J1349, at 1,950 rpm)
- 250 HP
- Fan drive
- Mechanical
- Governor
- All-speed control, electronic
Hydraulics
- System (6 selectable working modes)
- HydrauMind: closed-centre, load-sensing and pressure-compensated valves
- Main pumps (Boom, arm, bucket, swing and travel circuits)
- 2 variable-displacement piston pumps
- Pump flow (Maximum)
- 141.3 US gpm
- Max pressure (Implement and travel circuit relief valve setting)
- 37.3 MPa (380 kgf/cm2)
- Max pressure, swing (Relief valve setting)
- 27.9 MPa (285 kgf/cm2)
- Max pressure, travel (37.3 MPa (380 kgf/cm2); the brochure gives the travel circuit the same setting as the implement circuits)
- 5,410 psi
- Pilot circuit pressure
- 3.2 MPa (33 kgf/cm2)
- Travel motors
- 2 x axial piston motor with parking brake
- Swing motor
- 1 x axial piston motor with swing holding brake
- Boom cylinders
- 2 - bore 140 mm, stroke 1480 mm, rod 100 mm
- Arm cylinder
- 1 - bore 160 mm, stroke 1825 mm, rod 110 mm
- Bucket cylinder (For the 3185 mm arm; 150 mm bore and 110 mm rod with 2220 / 2550 mm arms)
- 1 - bore 140 mm, stroke 1285 mm, rod 100 mm
Undercarriage
- Center frame
- X-frame
- Track frame
- Box-section
- Track seal
- Sealed track
- Track adjuster
- Hydraulic
- Track shoes (each side) (45 on PC300-8M0)
- 48
- Track rollers (each side) (7 on PC300-8M0)
- 8
- Carrier rollers (each side)
- 2
- Swing reduction
- Planetary gear, grease-bathed swing circle
- Service brake
- Hydraulic lock
- Parking brake
- Mechanical disc brake
Service capacities
- Fuel tank
- 159.8 US gal
- Cooling system (Coolant)
- 8.2 US gal
- Engine oil (Refill capacity)
- 9.8 US gal
- Final drive (each)
- 2.4 US gal
- Swing drive
- 4.2 US gal
- Hydraulic tank
- 49.7 US gal