Komatsu D155AX-6
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Komatsu · dozer

Komatsu D155AX-6

Komatsu D155AX-6 (SAA6D140E-5, U.S. EPA Tier 3 / EU Stage 3A, strengthened SIGMADOZER blade, giant ripper, ROPS cab, 560 mm single-grouser shoes) from Komatsu's D155AX-6 brochure CEN00103-04 (Komatsu Australia, printed Feb 2013). Komatsu's current D155AX-8 is a Tier 4 Final machine and no Middle East D155AX sheet could be found, so this Tier 3 -6 sheet is used.

UAEGlobal

Blade capacity
12.3 yd3
power
354 HP
Operating weight
87,100 lb
Blade width
13.3 ft
Komatsu D155AX-6, side view with dimensions (illustration)11.1 ft10.7 ft20.1 ft
Komatsu D155AX-6, front view (illustration)8.9 ft

Dimensions

Width over tracks (Track gauge 2.14 m plus 560 mm shoe; Komatsu prints the two figures, not the sum)
8.9 ft
Overall length (with blade) (Tractor with SIGMADOZER, no ripper; 6.175 m Semi-U, 6.59 m Full-U, 6.743 m Angle)
20.1 ft
Ground clearance
1.6 ft
Shoe width (Standard single-grouser; 710 mm maximum)
1.8 ft
Grouser height
0.3 ft
Blade length x height options
SIGMADOZER 4,060 x 1,850 mm; Semi-U 4,130 x 1,790 mm; Full-U 4,225 x 1,790 mm; Angle 4,850 x 1,205 mm

Weight

Operating weight (Including strengthened SIGMADOZER, giant ripper, ROPS cab, operator, standard equipment, full fuel tank and rated fluids)
87,100 lb
Tractor weight (Including ROPS cab, operator, standard equipment, full fuel tank and rated fluids)
68,350 lb
Blade weight (SIGMADOZER) (Additional weight; 5,360 kg strengthened SIGMADOZER, 4,960 kg Semi-U, 5,630 kg Full-U, 5,170 kg Angle)
10,891 lb
Ripper weight (giant ripper) (Additional weight, including hydraulic control unit; 3,760 kg for the multi-shank ripper)
5,379 lb

Performance

Blade capacity (SIGMADOZER; 9.4 m3 Semi-U, 11.9 m3 Full-U, 4.6 m3 Angle)
12.3 yd3
Blade lift height (Maximum lift above ground, SIGMADOZER; 1.255 m Semi-U and Full-U, 1.562 m Angle)
4.3 ft
Digging depth (Maximum drop below ground, SIGMADOZER; 0.593 m Semi-U and Full-U, 0.664 m Angle)
2 ft
Maximum tilt at blade corner (Maximum tilt adjustment, SIGMADOZER; 0.953 m Semi-U, 0.97 m Full-U, 0.52 m Angle)
3 ft
Ground pressure (With strengthened SIGMADOZER, giant ripper and ROPS cab (operating weight))
106 kPa (1.08 kg/cm2)
Ground pressure (tractor only)
82.4 kPa (0.84 kg/cm2, 11.9 psi)

Engine

Engine model
Komatsu SAA6D140E-5
Type
4-cycle, water-cooled, direct injection
Aspiration
Turbocharged, air-to-air aftercooled, cooled EGR
Emissions
EPA Tier 3 and EU Stage 3A emissions certified
Cylinders
6
Bore x stroke
140 x 165 mm
Displacement
4 US gal
Gross power (SAE J1995, at 1,900 rpm)
360 HP
Net power (ISO 9249 / SAE J1349, at 1,900 rpm; 239 kW (320 HP) at maximum radiator fan speed)
354 HP
Fan drive
Hydraulic
Governor
All-speed and mid-range, electronic
Rated engine speed
1,900 rpm
Net power at max radiator fan speed
321 hp
Lubrication system
Gear pump, force lubrication, full-flow filter

Transmission

Transmission (Automatic and manual gearshift modes)
TORQFLOW: 3-element 1-stage 1-phase torque converter with lockup clutch, planetary multi-disc power shift, 3 forward / 3 reverse
Travel speed, forward (max) (3rd; 1st 3.8, 2nd 5.6, 3rd low 7.5 km/h)
7.2 mph
Travel speed, reverse (max) (3rd; 1st 4.6, 2nd 6.8, 3rd low 9.2 km/h)
8.7 mph
Steering (Wet multi-disc, spring-actuated, hydraulically released pedal service brakes)
Hydrostatic steering system (HSS), PCCS lever; counter-rotation turns
Min turning radius
7 ft
Final drives
Double-reduction spur and planetary, bolt-on segmented sprockets
Travel speed by gear, forward / reverse
F1/R1 3.8 / 4.6; F2/R2 5.6 / 6.8; F3L/R3L 7.5 / 9.2; F3/R3 11.6 / 14.0 km/h
Brakes
Wet multi-disc, pedal-controlled, spring-actuated and hydraulically released; gearshift lock lever applies the parking brake

Undercarriage

Undercarriage
K-Bogie, oscillation type with equalizer bar and forward-mounted pivot shafts
Track roller frame
Monocoque, high-tensile-strength steel
Track shoes (each side)
42
Track rollers (each side)
7
Carrier rollers (each side)
2
Shoe width options
560 mm standard; 610, 660, 710 mm single-grouser; 560, 610, 660 mm extreme service
Ground contact area (560 mm shoes)
36,680 cm²

Blade

Blade capacity (Full-U)
15.6 yd3
Semi-U tilt dozer
9.4 m3, 4,130 x 1,790 mm, overall length 6,175 mm, additional weight 4,960 kg
Angle dozer
4.6 m3, 4,850 x 1,205 mm, overall length 6,743 mm, additional weight 5,170 kg
Strengthened SIGMADOZER weight
11,817 lb

Ripper

Ripper beam length (giant ripper)
4.6 ft
Ripper maximum penetration (multi-shank) (Variable multi-shank ripper, three shanks)
3 ft
Ripper beam length (multi-shank)
7.6 ft
Ripper weight (multi-shank, with hydraulic control unit)
8,289 lb
Standard digging angle
49°

Hydraulics

System (Variable piston pump; all spool control valves mounted beside the hydraulic tank)
Closed-centre load sensing system (CLSS)
Pump flow (Implement circuit, at rated engine speed)
47.6 US gpm
Pump flow (steering) (Steering circuit, at rated engine speed)
85.9 US gpm
Max pressure (Implement relief valve setting; 38.2 MPa (390 kg/cm2) for steering)
27.5 MPa (280 kg/cm2)
Blade lift cylinders
2 - bore 110 mm
Blade tilt cylinder
1 - bore 160 mm
Ripper lift cylinder
1 - bore 180 mm
Ripper tilt cylinder
1 - bore 200 mm
Relief valve setting, steering
38.2 MPa (390 kg/cm2)

Service capacities

Fuel tank
165.1 US gal
Cooling system (Coolant)
21.7 US gal
Engine oil, with filter (Komatsu lists the refill capacity)
9.8 US gal
Damper
0.4 US gal
Transmission, bevel gear and steering system
23.8 US gal
Final drives (each)
8.2 US gal
Hydraulic tank (Hydraulic oil refill, Semi-U and U tilt dozer; ripper adds 37 L)
22.5 US gal
Hydraulic oil, ripper (additional)
9.8 US gal