Specification sheetIssued 20 November 2026
Kobelco · excavator
Kobelco SK200-10
Kobelco SK200-10 (standard boom, 2.94 m arm, 600 mm triple grouser shoes, 0.80 m3 ISO heaped bucket, HINO J05ETG-KSSP engine) from the Kobelco SK200/SK210LC-10 brochure for Africa and the Middle East. Short 2.40 m arm and SK210LC figures are given in notes.
UAEGlobal
- digging depth
- 22 ft
- power
- 153 HP
- Operating weight
- 45,856 lb
- Bucket capacity
- 1.05 yd3
9.9 ft11.1 ft31.5 ft
9.2 ftWorking range
- aMax digging reach (Standard 2.94 m arm; 9.42 m with the short arm)
- 32.5 ft
- bMax reach at ground level (9.24 m with the short arm)
- 31.9 ft
- cMax digging depth (6.16 m with the short arm)
- 22 ft
- dMax digging height (9.51 m with the short arm)
- 31.9 ft
- eMax dumping height (6.68 m with the short arm)
- 22.7 ft
- fMin dumping clearance (2.98 m with the short arm)
- 8 ft
- gMax vertical wall digging depth (5.57 m with the short arm)
- 20 ft
- hMin front swing radius (Standard 2.94 m arm; 3.56 m with the short arm)
- 11'8"
- iHorizontal digging stroke at ground level (4.08 m with the short arm)
- 17.3 ft
- jMax digging depth of cut for 8' level (2.4 m (8 ft) flat bottom; 5.95 m with the short arm)
- 21.4 ft
Performance
- Bucket capacity (ISO heaped, standard bucket (0.59 m3 struck); 0.93 m3 heaped bucket also offered)
- 1.05 yd3
- Bucket digging force (ISO 6015; 157 kN with Power Boost; same with the short arm)
- 32,148 lbf
- Arm digging force (Arm crowding force, ISO 6015, 2.94 m arm; 112 kN with Power Boost; 121 kN (133 kN boosted) with the 2.40 m arm)
- 22,931 lbf
- Swing speed
- 13.3 min-1
- Travel speed (high) (Low 3.6 km/h)
- 3.7 mph
- Travel speed (low)
- 2.2 mph
- Max drawbar pull (ISO 7464)
- 51,256 lbf
- Gradeability (70%)
- 35°
Weight
- Operating weight (SK200, 600 mm triple grouser shoes, standard boom, 2.94 m arm, 0.80 m3 ISO heaped bucket)
- 45,856 lb
- Operating weight, 700 mm shoes
- 46,738 lb
- Operating weight, 790 mm shoes
- 47,179 lb
- Ground pressure (600 mm shoes; 41 kPa with 700 mm, 36 kPa with 790 mm)
- 47 kPa
- Counterweight (As stated on the published lift capacity table)
- 9,480 lb
- Bucket weight (Standard 0.80 m3 bucket; 720 kg bottom-plate reinforced, 810 kg HD)
- 1,455 lb
Engine
- Engine model
- HINO J05ETG-KSSP
- Type
- Four-stroke, liquid-cooled, direct injection diesel, turbocharged with intercooler
- Cylinders
- 4
- Bore x stroke
- 112 mm x 130 mm
- Displacement
- 1.4 US gal
- Gross power (ISO 14396 (without fan), at 2000 min-1)
- 158 HP
- Net power (ISO 9249 (with fan), at 2000 min-1)
- 153 HP
- Max torque (ISO 9249 (with fan), at 1600 min-1; 592 Nm ISO 14396 (without fan))
- 420 lbf·ft
Hydraulics
- Main pumps
- Two variable displacement piston pumps + one gear pump
- Pump flow (2 x 220 L/min main pumps; pilot gear pump 20 L/min)
- 116.2 US gpm
- Boom, arm and bucket relief pressure (34.3 MPa (350 kgf/cm2))
- 4,975 psi
- Power Boost pressure (37.8 MPa (385 kgf/cm2))
- 5,482 psi
- Travel circuit pressure (34.3 MPa (350 kgf/cm2))
- 4,975 psi
- Swing circuit pressure (29.0 MPa (296 kgf/cm2))
- 4,206 psi
- Pilot circuit pressure (5.0 MPa (50 kgf/cm2))
- 725 psi
- Main control valve
- 8-spool valve
- Oil cooler
- Air cooled type
- Boom cylinders
- 120 mm bore x 1,355 mm stroke
- Arm cylinder
- 135 mm bore x 1,558 mm stroke
- Bucket cylinder
- 120 mm bore x 1,080 mm stroke
Undercarriage
- Travel motors
- Variable displacement piston motors
- Travel brakes
- Hydraulic
- Parking brakes
- Wet multiple plate
- Track shoes (each side)
- 46 (SK200); 49 (SK210LC)
- Swing motor
- One fixed displacement piston motor
- Swing brake
- Hydraulic; locks automatically when the swing lever is in neutral
- Swing parking brake
- Wet multiple plate
Service capacities
- Fuel tank
- 84.5 US gal
- Cooling system
- 4.8 US gal
- Engine oil
- 5.4 US gal
- Final drive, each side (Travel reduction gear, 2 x 5 L)
- 1.3 US gal
- Swing drive
- 0.8 US gal
- Hydraulic tank (Tank oil level)
- 37 US gal
- Hydraulic system (Total, including tank)
- 64.5 US gal
Service intervals
- Hydraulic oil (Long-life hydraulic oil)
- 5,000 hours
- Hydraulic oil filter (Replacement cycle)
- 1,000 hours