Kobelco SK200-10
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Kobelco · excavator

Kobelco SK200-10

Kobelco SK200-10 (standard boom, 2.94 m arm, 600 mm triple grouser shoes, 0.80 m3 ISO heaped bucket, HINO J05ETG-KSSP engine) from the Kobelco SK200/SK210LC-10 brochure for Africa and the Middle East. Short 2.40 m arm and SK210LC figures are given in notes.

UAEGlobal

digging depth
6.7 m
power
114 kW (153 HP)
Operating weight
20,800 kg
Bucket capacity
0.8 m³
Kobelco SK200-10, side view with dimensions (illustration)3.01 m3.37 m9.6 m
Kobelco SK200-10, front view (illustration)2.8 m

Working range

aMax digging reach (Standard 2.94 m arm; 9.42 m with the short arm)
9.9 m
bMax reach at ground level (9.24 m with the short arm)
9.73 m
cMax digging depth (6.16 m with the short arm)
6.7 m
dMax digging height (9.51 m with the short arm)
9.72 m
eMax dumping height (6.68 m with the short arm)
6.91 m
fMin dumping clearance (2.98 m with the short arm)
2.43 m
gMax vertical wall digging depth (5.57 m with the short arm)
6.1 m
hMin front swing radius (Standard 2.94 m arm; 3.56 m with the short arm)
3.55 m
iHorizontal digging stroke at ground level (4.08 m with the short arm)
5.27 m
jMax digging depth of cut for 8' level (2.4 m (8 ft) flat bottom; 5.95 m with the short arm)
6.52 m

Performance

Bucket capacity (ISO heaped, standard bucket (0.59 m3 struck); 0.93 m3 heaped bucket also offered)
0.8 m³
Bucket digging force (ISO 6015; 157 kN with Power Boost; same with the short arm)
143 kN
Arm digging force (Arm crowding force, ISO 6015, 2.94 m arm; 112 kN with Power Boost; 121 kN (133 kN boosted) with the 2.40 m arm)
102 kN
Swing speed
13.3 min-1
Travel speed (high) (Low 3.6 km/h)
6 km/h
Travel speed (low)
3.6 km/h
Max drawbar pull (ISO 7464)
228 kN
Gradeability (70%)
35°

Weight

Operating weight (SK200, 600 mm triple grouser shoes, standard boom, 2.94 m arm, 0.80 m3 ISO heaped bucket)
20,800 kg
Operating weight, 700 mm shoes
21,200 kg
Operating weight, 790 mm shoes
21,400 kg
Ground pressure (600 mm shoes; 41 kPa with 700 mm, 36 kPa with 790 mm)
47 kPa
Counterweight (As stated on the published lift capacity table)
4,300 kg
Bucket weight (Standard 0.80 m3 bucket; 720 kg bottom-plate reinforced, 810 kg HD)
660 kg

Engine

Engine model
HINO J05ETG-KSSP
Type
Four-stroke, liquid-cooled, direct injection diesel, turbocharged with intercooler
Cylinders
4
Bore x stroke
112 mm x 130 mm
Displacement
5.1 L
Gross power (ISO 14396 (without fan), at 2000 min-1)
118 kW (158 HP)
Net power (ISO 9249 (with fan), at 2000 min-1)
114 kW (153 HP)
Max torque (ISO 9249 (with fan), at 1600 min-1; 592 Nm ISO 14396 (without fan))
569 Nm

Hydraulics

Main pumps
Two variable displacement piston pumps + one gear pump
Pump flow (2 x 220 L/min main pumps; pilot gear pump 20 L/min)
440 L/min
Boom, arm and bucket relief pressure (34.3 MPa (350 kgf/cm2))
343 bar
Power Boost pressure (37.8 MPa (385 kgf/cm2))
378 bar
Travel circuit pressure (34.3 MPa (350 kgf/cm2))
343 bar
Swing circuit pressure (29.0 MPa (296 kgf/cm2))
290 bar
Pilot circuit pressure (5.0 MPa (50 kgf/cm2))
50 bar
Main control valve
8-spool valve
Oil cooler
Air cooled type
Boom cylinders
120 mm bore x 1,355 mm stroke
Arm cylinder
135 mm bore x 1,558 mm stroke
Bucket cylinder
120 mm bore x 1,080 mm stroke

Undercarriage

Travel motors
Variable displacement piston motors
Travel brakes
Hydraulic
Parking brakes
Wet multiple plate
Track shoes (each side)
46 (SK200); 49 (SK210LC)
Swing motor
One fixed displacement piston motor
Swing brake
Hydraulic; locks automatically when the swing lever is in neutral
Swing parking brake
Wet multiple plate

Service capacities

Fuel tank
320 L
Cooling system
18 L
Engine oil
20.5 L
Final drive, each side (Travel reduction gear, 2 x 5 L)
5 L
Swing drive
3 L
Hydraulic tank (Tank oil level)
140 L
Hydraulic system (Total, including tank)
244 L

Service intervals

Hydraulic oil (Long-life hydraulic oil)
5,000 hours
Hydraulic oil filter (Replacement cycle)
1,000 hours