Specification sheetIssued 20 November 2026
John Deere · wheel loader
John Deere 644
John Deere 644 P-Tier (maker spec sheet MW644PAU; successor to the 644L), standard Z-Bar linkage, 3.2 m³ general-purpose pin-on bucket with bolt-on edge, 23.5 R 25 tyres, PowerTech PSS 6068 (Final Tier 4 / Stage V). The High-Lift linkage and the 3.4 m³ bucket are in the same sheet and are not covered here.
USAGlobal
- Bucket capacity
- 4.25 cu yd
- power
- 249 hp
- Operating weight
- 41,246 lb
- Static tipping load (full turn)
- 26,072 lb
11.3 ft10.9 ft27.3 ft
9.4 ftDimensions
- Tread width (Michelin 23.5 R 25 L-3)
- 85.4"
- Width over tyres
- 113.2"
- Bucket width
- 10'0"
- Turning radius (outside of tyre) (Measured to centreline of outside tyre)
- 18'6"
- Clearance circle (bucket) (Bucket in carry position)
- 42'8"
Weight
- Operating weight (Z-Bar, 3.2 m³ GP pin-on bucket, ROPS cab, counterweight, guards, full fuel tank and 79 kg operator)
- 41,246 lb
- Bucket weight (3.2 m³ GP bucket with bolt-on cutting edge)
- 4,066 lb
Engine
- Engine model
- John Deere PowerTech PSS 6068
- Emissions
- EPA Final Tier 4 / EU Stage V
- Cylinders
- 6, 4 valves per cylinder, series turbocharged and charge-air cooled
- Displacement
- 415 cu in.
- Gross power (ISO 9249, gross peak, at 1,800 rpm)
- 260 hp
- Net power (ISO 9249, net peak, at 1,800 rpm)
- 249 hp
- Max torque (ISO 9249 gross peak, at 1,400 rpm)
- 811 lb-ft
- Net peak torque (ISO 9249, at 1,400 rpm)
- 783 lb-ft
- Net torque rise
- 58%
- Fuel system
- Electronically controlled high-pressure common rail
- Cooling fan drive
- Hydraulically driven, proportionally controlled, fan aft of coolers
- Electrical system
- 24 V, 100 A alternator (140 A optional), 2 x 12 V batteries, 950 CCA each
Performance
- Bucket capacity (Heaped; struck 2.7 m³ (3.47 cu yd))
- 4.25 cu yd
- Bucket capacity range
- Pin-on 3.2-3.6 m³; coupler 3.1-3.6 m³
- Rated operating capacity (ISO 14397-1, 50% of full-turn tipping load, with tyre deflection (6,493 kg without))
- 13,036 lb
- Static tipping load (straight) (With tyre deflection (15 005 kg without))
- 31,012 lb
- Static tipping load (full turn) (40 deg full turn, with tyre deflection (12 987 kg without))
- 26,072 lb
- Breakout force (Maker lists 15 574 kg)
- 34,334 lb
- Top speed (5th gear forward, lockup converter, 23.5 R 25 tyres)
- 24.9 mph
- Hydraulic raise time
- 5.3 s
- Hydraulic dump time
- 1.4 s
- Hydraulic lower time (power down)
- 3.8 s
- Hydraulic total cycle time
- 10.5 s
Transmission
- Transmission
- Countershaft-type PowerShift, 5 speeds with lockup torque converter (4-speed optional)
- Torque converter
- Single stage, single phase
- Shift control
- Electronically modulated, adaptive, load and speed dependent; manual/auto; 4 clutch cutoff settings
- Forward 1 (Standard 5-speed with lockup converter, 23.5 R 25 tyres)
- 4.4 mph
- Forward 2
- 7.5 mph
- Forward 3
- 12.7 mph
- Forward 4
- 15.3 mph
- Forward 5
- 24.9 mph
- Reverse 1 (Standard 5-speed with lockup converter, 23.5 R 25 tyres)
- 4.7 mph
- Reverse 2
- 8.0 mph
- Reverse 3
- 16.2 mph
Axles and brakes
- Final drives
- Heavy-duty inboard-mounted planetary
- Differentials
- Hydraulic locking front with conventional rear (standard); dual locking front and rear (optional)
- Rear axle oscillation (Stop to stop, 13 deg each direction, with 23.5 R 25 tyres)
- 26°
- Service brakes
- Hydraulically actuated, inboard sun-shaft mounted, oil cooled, self-adjusting, single disc (ISO 3450)
- Parking brake
- Automatic spring applied, hydraulically released, driveline mounted, oil cooled multi-disc
Hydraulics
- Pump type
- Variable-displacement axial piston, closed-centre, pressure-compensating (loader and steering)
- Pump flow (At 6,895 kPa (1,000 psi) and 2,250 rpm)
- 82 gpm
- Max pressure (System relief pressure, loader and steering (25 166 kPa))
- 3,650 psi
- Loader controls
- 2-function valve, joystick or fingertip controls; optional 3rd and 4th function valve with auxiliary lever
- Steering type
- Fully hydraulic power steering (ISO 5010)
- Articulation angle (80 deg arc, 40 deg each direction)
- 80°
Tyres
- Tyres (Standard; other tyres are listed on p.9 of the sheet)
- 23.5 R 25 Michelin 1 Star L-3
Service capacities
- Fuel tank
- 92.6 gal
- Cooling system
- 47 qt
- Diesel exhaust fluid (DEF) tank
- 19.5 qt
- Engine oil (With vertical spin-on filter)
- 28.5 qt
- Transmission (Reservoir with vertical filter)
- 24.3 qt
- Axle oil, front (Front and rear, each)
- 23 qt
- Axle oil, rear (Front and rear, each)
- 23 qt
- Hydraulic tank (Reservoir and filter)
- 27.8 gal
- Park brake oil (wet disc)
- 22 oz