Specification sheetIssued 20 November 2026
John Deere · wheel loader
John Deere 644
John Deere 644 P-Tier (maker spec sheet MW644PAU; successor to the 644L), standard Z-Bar linkage, 3.2 m³ general-purpose pin-on bucket with bolt-on edge, 23.5 R 25 tyres, PowerTech PSS 6068 (Final Tier 4 / Stage V). The High-Lift linkage and the 3.4 m³ bucket are in the same sheet and are not covered here.
USAGlobal
- Bucket capacity
- 3.3 m³
- power
- 186 kW (249 hp)
- Operating weight
- 18,709 kg
- Static tipping load (full turn)
- 11,826 kg
3.45 m3.31 m8.33 m
2.88 mDimensions
- Tread width (Michelin 23.5 R 25 L-3)
- 2.17 m
- Width over tyres
- 2.875 m
- Bucket width
- 3.04 m
- Turning radius (outside of tyre) (Measured to centreline of outside tyre)
- 5.64 m
- Clearance circle (bucket) (Bucket in carry position)
- 13 m
Weight
- Operating weight (Z-Bar, 3.2 m³ GP pin-on bucket, ROPS cab, counterweight, guards, full fuel tank and 79 kg operator)
- 18,709 kg
- Bucket weight (3.2 m³ GP bucket with bolt-on cutting edge)
- 1,844 kg
Engine
- Engine model
- John Deere PowerTech PSS 6068
- Emissions
- EPA Final Tier 4 / EU Stage V
- Cylinders
- 6, 4 valves per cylinder, series turbocharged and charge-air cooled
- Displacement
- 6.8 L
- Gross power (ISO 9249, gross peak, at 1,800 rpm)
- 194 kW (260 hp)
- Net power (ISO 9249, net peak, at 1,800 rpm)
- 186 kW (249 hp)
- Max torque (ISO 9249 gross peak, at 1,400 rpm)
- 1,100 Nm
- Net peak torque (ISO 9249, at 1,400 rpm)
- 1,061 Nm
- Net torque rise
- 58%
- Fuel system
- Electronically controlled high-pressure common rail
- Cooling fan drive
- Hydraulically driven, proportionally controlled, fan aft of coolers
- Electrical system
- 24 V, 100 A alternator (140 A optional), 2 x 12 V batteries, 950 CCA each
Performance
- Bucket capacity (Heaped; struck 2.7 m³ (3.47 cu yd))
- 3.3 m³
- Bucket capacity range
- Pin-on 3.2-3.6 m³; coupler 3.1-3.6 m³
- Rated operating capacity (ISO 14397-1, 50% of full-turn tipping load, with tyre deflection (6,493 kg without))
- 5,913 kg
- Static tipping load (straight) (With tyre deflection (15 005 kg without))
- 14,067 kg
- Static tipping load (full turn) (40 deg full turn, with tyre deflection (12 987 kg without))
- 11,826 kg
- Breakout force (Maker lists 15 574 kg)
- 153 kN
- Top speed (5th gear forward, lockup converter, 23.5 R 25 tyres)
- 40 km/h
- Hydraulic raise time
- 5.3 s
- Hydraulic dump time
- 1.4 s
- Hydraulic lower time (power down)
- 3.8 s
- Hydraulic total cycle time
- 10.5 s
Transmission
- Transmission
- Countershaft-type PowerShift, 5 speeds with lockup torque converter (4-speed optional)
- Torque converter
- Single stage, single phase
- Shift control
- Electronically modulated, adaptive, load and speed dependent; manual/auto; 4 clutch cutoff settings
- Forward 1 (Standard 5-speed with lockup converter, 23.5 R 25 tyres)
- 7.1 km/h
- Forward 2
- 12.1 km/h
- Forward 3
- 20.5 km/h
- Forward 4
- 24.7 km/h
- Forward 5
- 40 km/h
- Reverse 1 (Standard 5-speed with lockup converter, 23.5 R 25 tyres)
- 7.5 km/h
- Reverse 2
- 12.8 km/h
- Reverse 3
- 26.1 km/h
Axles and brakes
- Final drives
- Heavy-duty inboard-mounted planetary
- Differentials
- Hydraulic locking front with conventional rear (standard); dual locking front and rear (optional)
- Rear axle oscillation (Stop to stop, 13 deg each direction, with 23.5 R 25 tyres)
- 26°
- Service brakes
- Hydraulically actuated, inboard sun-shaft mounted, oil cooled, self-adjusting, single disc (ISO 3450)
- Parking brake
- Automatic spring applied, hydraulically released, driveline mounted, oil cooled multi-disc
Hydraulics
- Pump type
- Variable-displacement axial piston, closed-centre, pressure-compensating (loader and steering)
- Pump flow (At 6,895 kPa (1,000 psi) and 2,250 rpm)
- 310 L/min
- Max pressure (System relief pressure, loader and steering (25 166 kPa))
- 252 bar
- Loader controls
- 2-function valve, joystick or fingertip controls; optional 3rd and 4th function valve with auxiliary lever
- Steering type
- Fully hydraulic power steering (ISO 5010)
- Articulation angle (80 deg arc, 40 deg each direction)
- 80°
Tyres
- Tyres (Standard; other tyres are listed on p.9 of the sheet)
- 23.5 R 25 Michelin 1 Star L-3
Service capacities
- Fuel tank
- 350 L
- Cooling system
- 44 L
- Diesel exhaust fluid (DEF) tank
- 18.5 L
- Engine oil (With vertical spin-on filter)
- 27 L
- Transmission (Reservoir with vertical filter)
- 23 L
- Axle oil, front (Front and rear, each)
- 22 L
- Axle oil, rear (Front and rear, each)
- 22 L
- Hydraulic tank (Reservoir and filter)
- 105.2 L
- Park brake oil (wet disc)
- 0.7 L